May 30, 201214 yr comment_606951 I finally got my car on the road and regoed after two and a half years. I have a few little problems that need guide with 1.i have a rattling up high in the rpm around 4500+.. i thought timing chain but an mchanic friend said ajust the rocker clearence. Dad said it could be pinging from ignitin timing all tho it does have a bosch 4k dizzy on my 3k-c motor.? 2. it has a shudder on braking on the front right but i have new brakes got tol it could be bushings or ball joints or tie rod ends ? Any help i can get ? Report
May 31, 201214 yr comment_607092 I finally got my car on the road and regoed after two and a half years. I have a few little problems that need guide with 1.i have a rattling up high in the rpm around 4500+.. i thought timing chain but an mchanic friend said ajust the rocker clearence. Dad said it could be pinging from ignitin timing all tho it does have a bosch 4k dizzy on my 3k-c motor.? 2. it has a shudder on braking on the front right but i have new brakes got tol it could be bushings or ball joints or tie rod ends ? Any help i can get ? 1 not easy to pin point with out seeing the car but best thing to do is set your tappets first then ignition timing there's no problem having a Bosch distributor my ke30 had one all the info should be on the sticker on your air box 2 what kind of shuddering because the ball joints tie rod ends ect should have been checked as a rego item Report
May 31, 201214 yr Author comment_607208 no suspension and steering has been replaced on the front but brakes are new and idk what it says on my air box all the letters and numbers were screwed and got painted black after Report
June 1, 201214 yr comment_607321 no suspension and steering has been replaced on the front but brakes are new and idk what it says on my air box all the letters and numbers were screwed and got painted black after Did the rotors get replaced or machined?? Maybe the rotor is distorted but when they are you will feel it through the brake pedal it will pulsate if the rotor is warped where abouts are you located I may be able to help out with it There's the clearances for you hope it helps Report
June 2, 201214 yr Author comment_607484 I have the gregorys manual but I'm talking all about the vacume advance whillst running up past 3500 rpm Report
June 2, 201214 yr Author comment_607494 i have a video of the rattle up high can't up load its 29+meg Report
June 2, 201214 yr comment_607572 i have a video of the rattle up high can't up load its 29+meg Some where I can see the video ?? Do you have a timing light to set your timing Report
June 3, 201214 yr Author comment_607672 yes i do its been set to 8 deg btdc but the book says for a 3k-c Report
June 4, 201214 yr comment_607777 yes i do its been set to 8 deg btdc but the book says for a 3k-c That's pretty right I run about 8-10 with the vacuum hose off If you have set the tappets and adjusted the timing and you think it may be detonating try pulling the distributor out and make sure sure the bob weights haven't seized Report
June 4, 201214 yr Author comment_607940 pics of the bob weights and gota wait till later this week needs new sump gasget yet it ripped sunday arvo Report
June 5, 201214 yr comment_607998 Haven't got any pics at the moment I got a Bosch distributor at home I'll pull apart and get pics of but would be a good chance to freshen up your dizzy if you think your engine is pinging like I said before it's hard to pick without hearing the engine rattle because if your dizzy was playing up it may also cause a flat spot while driving more of a process of elimination at the moment Report
June 6, 201214 yr Author comment_608263 i put it on you tube http://www.youtube.com/watch?v=sytcp3mOUP8 Report
June 6, 201214 yr comment_608271 are you sure the fan isnt flexing into the radiator as that is what is sounds like Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now