got 4age from an ae92

 

I have got most of the info i need to do the conversion into my 20.

 

Plenty of info on ecu, wiring, intakes, etc.. just can't find the relevant info on clutch and starter.

 

simple question, can i use the fwd starter and or clutch on a t50 rwd box?

rollaclub faq. all the info you need. there is a link on the rollaclub homepage.

http://www.rollaclub.com/faq/index.php?title=Tech:Engine/A_Series/Converting_to_RWD

I'm of the opinion that you'll need an AE71/AE86 starter motor.

rollaclub faq. all the info you need. there is a link on the rollaclub homepage.

http://www.rollaclub...nverting_to_RWD

 

yes i've read that one,

 

it says there are 2 different diamtere clutches but doesnt mention whether fwd/rwd are the same.

I have a great fwd one and don't want to spend money on a new one if i don't have to.

 

and nothing on the starters.. I guess i can wait til i get the t40/50 and bolt it up and see what happens. was just hoping someone knew off the top of their head for sure it would/wouldnt work.

 

I think i can probably get the starter bolted in with some minor mods if need be. (grind/drill a hole into the bellhousing and tap a thread/weld a nut on the back of the steel plate)

Oh wait.. it is there i missed it on the first 2 reads lol (dumbass)

 

"If yours is the 212mm Clutch, you will have to buy an AE92 100KW 4AGE 212mm clutch kit (also you will have to buy a throwout bearing from an AE71/AE86, as the AE92 clutch kit throwout bearing is completely different)so i can use the clutch on it (ae92) and buy a throwout bearing. :D

yay

correct!

don't forget to fit a spigot bearing into the crankshaft though!!!!

FWD's don't have a spigot bearing, but you need one on RWD.

don't forget to fit a spigot bearing into the crankshaft though!!!!

FWD's don't have a spigot bearing, but you need one on RWD.

 

did that one. thanks :)