my front bumper sits on the piss and i have some time off work and want to fix it

but i can't workout which bolts underneath are for the bumper bracket

 

as you can see from the photo, left side sits higher than right

4 bolts on the chassis rail inside the engine bay, 2 are an ass to get to as they are under the battery. Then 2 under the bumper bolted to the front of the car.

Edited November 12, 201213 yr by B.L.Z.BUB

Also small ones in the guards if they have been left there. Spray them all with WD40 as they're usually rusty, and I found one of my exterior ones had the flap broken off. Nice guy welded it on for nix...

Thanks guys

Would that be a bent bracket or does it adjust?

 

You'll probably find its had a knock and its bent.

You might be able to file the holes oval in the direction you want, or maybe smack the brackets into the place they should be.

 

Its not very noticeable, it will only be a mm or two.