thomo Posted March 28, 2006 Report Posted March 28, 2006 hey anyone, does the ke30/55 tailshaft yoke fit the ae71 5 speed? if not are the unis the same? Quote
Raven Posted March 30, 2006 Report Posted March 30, 2006 I would think the yoke would be different. Only one way to find out really. Go to a self-serve wrecker and toy around. I know my KE55 that i put my 4A-C in had a custom shortened tailshaft. I'll have a look at my spare rusty sedan one tomorrow and tell you if they are different or not. Quote
KE354AGE Posted March 31, 2006 Report Posted March 31, 2006 nope, the shaft is not a straight bolt up, the spline is different, and I'm pretty sure the uni's are different too. i have a KE35 with an AE71 T50 in it, and it had to have the yoke from an AE71 tailshaft welded on the end, it was also shortened a bit. Quote
thomo Posted April 1, 2006 Author Report Posted April 1, 2006 bugger, that job just got a little more difficult then! thank for the feed back Quote
Rolla__Boy Posted April 2, 2006 Report Posted April 2, 2006 Funnily enough, if you put a 202 and holden 4 speed in a KE30, you can change the yoke on the rolla tailshaft to the holden one, and the tailshaft is the right length, and it bolts in. Yet you can't get many toyota ones to bolt in that easy...it sucks Quote
thomo Posted April 4, 2006 Author Report Posted April 4, 2006 that sounds heaps easyer, think i'll do that!! haha but its food for thought, you can buy 2 way unis to fit holden tailshaft yokes so stands to reason there would be one to fit the t50 yoke to a 30/55 shaft, if the bugger wasnt to long already Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.