Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Aftermarket Seats/engineering

Featured Replies

Hi All,

 

The drivers seat in my AE82 Twin Cam is a little on the floppy side - movement in the seat rails (assuming wear as they are securely bolted down) and some play in the seat back.

 

I doubt whether this would pass scrutineering at the local hill climb (also a little disconcerting on the street), so looking at options.

 

The cheapest option I guess would be to see if I can fix the seat rails and seat back.

 

But the seats are not super supportive.

 

I've had a quick look at aftermarket seats like the Autotechnica Monza and a couple of fixed back seats (would love a Sparco Sprint). I'm led to believe that to fit these and have them street legal I really need to get them engineered (mainly I guess for the rails/adaptors). Has anybody had any experience in getting this done, any recommendations on who to go to and some idea of costs.

 

Any help much appreciated.

 

Cheers,

Todd

can you get done in NSW if you use the standard seat rails and just elongate some holes to make an aftermarket seat fit?

Edited by Redwarf

For engineering purposes: elongated holes = bad.

 

The other thing is this: is the seat ADR approved? Not all aftermarket seats are.

 

(P.S: The edit line in the above post is only there because I pressed the wrong button.... )

  • Author

Weird thing is I've been told by 2 retailers who supply seats that there is no such thing as an ADR approved seat. There is an ADR for seat rails and for headrests, but no ADRs for anything inbetween.

As long as you use the original seat rails no engineers cert is needed. I got a pair of fixed OBX Daytona's for less then $400 delivered to my door for the rally car and they are not to bad at all.

 

you can find them here http://cgi.ebay.com.au/OBX-Daytona-Race-Se...1QQcmdZViewItem

on ebay at On Line Performance, I have got a few things from them and they are good to deal with.

 

And yes there is an ADR for seats and the OBX range are ADR approved, the ADR's cover the safety standards that a seat must comply to not the design as such (so I was once told by a guy that used to design seats for Nissan).

Edited by Trendact

And yes there is an ADR for seats and the OBX range are ADR approved.

 

Correct. For example if you buy a Velo GP90 (as used and recommended by Redwarf Motorsport), you can buy it in two versions. The FIA approved non ADR version, or the ADR approved non FIA version. Go figure.

both mine are recaros - would they be approved?

...will just need some large washers to cover the elongated holes :dance:

What elongated holes? :dance:

 

The deal with ADR compliancy is that, well, it costs money. And the makers decide whether it's worth their while complying them, as the factory's ned inspection, x amount have to be tested to distruction, etc.

 

Big companies can afford it, smaller one's like Velo should be given crdit for doing it, too.

Edited by Redwarf

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.