bourtoni

Looks good!! gotta be happy with that,mine is still ongoing,its hard finding funds,parts and time haha,

looks good, hows the project going

looking good mega,your mags look good,how much did they charge you to polish them?

gj mega,,biggest thing make sure its super clean and just take your time

put in a window this time,with a thermo fan of the ae82 i pulled the motor out of haha,bit of crap in the paint but pretty happy on how it turned out also put new sealer on the seams,was wet rub with p400 and red scotchbrite on the bits i couldnt get with the 400,, 2pac in the engine bay is a must in my opinion

$80 well spent i think,used it to dig all the old sealer out and it kinda worked like a scaler on the rust along all the seams and it also allowed me to sand 95% of engine with it using the sander attachment(alot of sandpaper lol) i used 5inch velcro discs p150 which i got for nothing but not expensive for box.then i went over that with an orbital sander with p320 only the parts that arent covered up,,rust converter on all the seams then wiped whole engine bay down 3 times,twice with thinners and then final wipe with 70% metho 30% water mix,,then your 2pac primer over the top of that,,it was still factory paint on mine which is a baked enamel so 2pac can go straight over which meant i didnt have to take all the factory paint off only where i had too,see if you go acrylic then you wanna go 2pac in the future your gunna have to strip all of the acrylic off and i meant all of it,not very fun at all haha,as far as spraying 2pac go on youtube theres gotta be videos on how to spray 2pac,do a couple test panels,youll get it,,but a pretty sure 2pac is illegal to spray without a proper filtration system so i do not indorse this hahaha,, and thats how far ive got so far

this is how its done hahaha only thing is add a window with a fan sucking out(put a blanket or something in front of it to stop overspray lol)

Won't upload photos of how I set my garage up

I'm doing mine in my garage,will let you know how it turns out on monday

Mate to be honest withyou I would be doing the engine bay in 2pac,much more durable,I just got mine primed last night,will be ready to paint on Monday(long weekend wooooo) only thing is you'll have to strip all the acrylic off,a lot of work but you'll thank me when in 2 years when it still looks like the day you painted it.

Thanks heaps,

cheers mate, thats the 1

hey mate would put up link but not sure how to,ive got a w55 box and need a way to adapt to my 4age,not sure on exact power but will be turbo, between 10 to 15psi,the bellhousing is on ebay and being sold by rolin auto imports(4A to W series bellhousing)any help would be appreciated.

surely someone on here has used 1

has no one used this bellhousing?