RAT_SECA
-
Posts
29 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by RAT_SECA
-
-
Another update! She's back on the ground for the first time in over a year!
Also sound deadened/underbody sprayed the lower radiator support and inner guards.
Colour matched the upper radiator support (weirdly from factory they are black in the centre.) And motor is almost completely back together! Big thanks to forum member Kebin for doing the wiring harness!
Have done all new front wheel bearings, bushes, ball joints and brakes. Once I have it running I will be doing the same to the rear! Will be like a brand new car when I'm done!
Also scored a parts car for free. She has a blown clutch, water in the motor and the radiator support has been pushed upwards. She will donate a few pieces to the build!
Check out the height difference from stock to lifted! Roughly 4.5" higher taking lift and tyres into account. -
Just another post regarding the mods by not the bloke I bought it from but the bloke before him. Actually got in contact with him shortly after buying the car and got some photos and more info off him.
So it's got Dobinsons springs front and rear. Front are TN Magna springs (C43-038) which give roughly 1" lift and it has a 2" strut top spacer. Rear is what I believe to be EL Falcon springs with stock gen 1 Rav4 shocks which are 3" longer than standard AE95 shocks. Rear end also has custom adjustable upper control arms and panhard rod. For those that don't know, the rear end on these are live axle coil sprung. Future plans will be to get some more flex out of the rear end. I will be removing both front and rear sway bars. (car won't be daily driven so shouldn't need them.) I actually live in the town where the Dobinsons Springs production warehouse is so will be making a visit to them to try and find a slightly longer rear shock. I also plan on going 27x8.5 R14 Kumho MT tyres in the future. Current tyres are 185r14 Maxxis MT753's.
I'll throw in a couple pics from the previous owner and the journeys he took it on.
I'm up in Central Queensland Australia so pretty cool that it has been so far south as Coffs Harbour NSW
-
Story time! This is my 1988 Toyota Corolla SR5 AE95 4WD. I went on the hunt for one of these in July 2021. Looked for about 6 months and only found 3 in that time. 2 were full of rust which I wasn't interested in taking on. This one popped up with a issue where it wouldn't go into gear. (manual) Owner wasn't sure if it was a gearbox or clutch issue. The car had a lot of work done by the previous owner so I decided to jump on it. Ended up paying $1400aud site unseen as the car was 700km away from me. Paid another 700 to get the car to me. Car arrived in my possession October 2nd 2021. Overall very happy with the purchase! Diagnosed it as being the clutch due to being able to start the car it in gear. The old 4AFE didn't run the best, after swapping heaps of parts over trying to diagnose the issue I gave up on it and started looking at engine conversions. Actually came across Kevins build thread on here with his 7AFE AE95 and with me actually having a spare 7AFE here it was obviously meant to be! Was nothing wrong with the 7AFE but ended up stripping it down, chucking a full gasket kit through it, new water pump, Gates timing belt kit, Exedy HD clutch, rear main, crank and cam seal, etc. Had some personal things come up and lost interest in it for a while there, but back in full swing now, been really getting into it over the past few months. It's so close to being done and so keen to hit the beaches and trails in the old girl!
So here is a few pics of the progress so far!
The day she arrived!
The 4AFE
Coming out!
The 7AFE
Coming along nicely.
And ready to go in!
Clutch on!
Gearbox on, was such a tedious job but we got it done!
While the 7AFE is a notched block like the stock 4AFE it still required some grinding to clear the 4WD transfer case.
And now shes bolted up in the bay! Still got a fair ways to go but loving the journey! Have all new bushes, wheel bearings and ball joints for the front end. And did the inner and outer rack ends and rack bushes while the engine was out. Also repainted the bay!
Cheers for reading! Will update with more as I go! -
Well I haven't posted here for a while.
Fair amount of work gone into it since last post.
Now on some 16x8 +15 Work Seeker CX wheels!
Fitted front strut brace and inner fender braces.
And fitted Series 1 SX front bumper with factory lip.
-
Long story short, sold this one to move onto other projects.
-
On 9/25/2022 at 2:54 PM, Ridwan said:
@RAT_SECA do you have the wiring diagram for the long cluster ? I'm planning upgrade mine with the long cluster but I don't have the wiring diagram ... thanks
Hi mate I used this one!
-
Few mods over the past few weeks!
JDM Wagon face front end conversion!
And now sitting pretty on some BC coilovers! Missed the low life so much!
And black slimline weather shields!
And wheels have been ordered but have a 4-6 month wait!
-
Photos should be working now!
-
Big update on this car, bit of a change of plans. It has now become my daily driver. In saying that the mods have not stopped and mods are still incoming as well including some goodies from japan!
Chucked in the AE93 SX cluster while keeping the original low km odometer.
Cleaned up the engine bay and polished the valve cover.
And just a few shots of the old girl!
-
Bit of an update. Have decided to go with my original plan and build a 7AGE. So will be ordering most of the parts I need in the next few months from MRP. But for now this is where I am at. Have just completed the brake swap. Out with the 238mm solid front end and drum rear end, in with the 258mm vented front end with swaybar and 242mm disc brake rear end. After the motor is done I will be pulling it back apart to replace all the bushes and brakes. But for now I need to get the parts cars out of here hence swapping it over now.
Old
New
Will have to give her a wash soon, starting to look a bit like a barn find.
-
Decided to give the T04S7R some love from my tax back so moved the headunit down to the lower hole and got a Kenwood DMX5020s double din, love it! Made a gauge holder out of plexiglass and have a oil pressure gauge to go in the centre hole just have to sort out the sensor.
Also been really enjoying this thing lately! Love driving it every day!
-
Some updates for ya'll, ended up having the head reconditioned, so now I am rebuilding the bottom end as well. Got genuine water pump, oil pump and gasket kit ready for it. Still got a fair bit to do as well.
Also put the full Series 1 SX interior in.
Stock
SX
Also chucked the wheels off the RV Seca on. Found out they are actually Rota branded wheels.
And got the engine and dash harness out the SX along with the long dash cluster. Will be waiting for the 4AGE to be done before I go pulling the sedan apart so it's still drivable until then.
-
Hi guys and girls, thought I would post up my new project that I have been planning for quite a while. Have had the 4AGE donor car for over a year now but have been searching for the perfect car to chuck all the good bits into! So here is the one I found. I am the 3rd owner, 157,xxxkms on the clock. Paint is near perfect apart from fade on the roof which will be being resprayed factory colour. Jacked it up to have a look underneath and found NO RUST! So before I pulled the 4AGE out I decided to comp test it, in which, no joke it lost compression on cylinders 1-3 while I was testing it.... All had 30psi except cyl 4 which had 140psi. So plan is to rebuild it, I pulled the head off on the weekend and couldn't see any obvious signs as to why it lost comp. Will be dropping the head off at the machiners tomorrow to have it pressure tested. I also picked up a RV Seca which will donate it's 255mm front brakes and 243mm rear disc brake conversion. Will be a whole new car when it is done! Plan is to keep it relatively stock on the outside. Just want a clean weekender. Here's some photos for you all!
-
AE93 SX parts car, Don't have any updated photos as it's sitting way down the back yard, but all the brakes and interior, wing, front end etc went onto my AE94.
-
1
-
-
Thought I would share my project build from the past 3 years. Owned it for 5 years but been off the road for 3 years getting a whole heap of stuff done. Although, I have lost interest in it now and looking at selling it soon to make a jump towards my dream car, a KE38 Corolla. 😍
Alright it's a 1999 Subaru Forester GT Luxury, so it has the full leather and moonroof.
Engine:
EJ205
VF34 turbo
Front mount intercooler
silicone inlet with K&N POD filter
STI 550CC injectors
Raceworks 255LPH pump
Turbosmart Eboost2 Electronic boost controller
XForce Turbo back exhaust
Exedy clutch
Suspension, Steering & Brakes:
Tein Coilovers
Whiteline adjustable rear sway bar with HD mounts
Whiteline camber bolts
GC8 WRX steering rack with Whiteline rack and pinion bushes
WRX 4 pot front brakes
Interior:
GD WRX leather front seats
Turbosmart boost gauge on the pillar
Eboost2 mounted in the centre console to hide it from the popo. 😅
Wheels:
18x9 +25 Cosmis MR7's
225/40r18 cheapo tyres
Exterior:
Custom 2002 Subaru Outback front bumper
Hella Sharptone horns
Modified headlights
35% tint all round
Engine bay painted Ford Blue
Clear side indicators
-
Owner: Daniel Username: RAT_SECA Location: Queensland, Australia Vehicle Name: .. Vehicle Model: AE94 Body Shape (# Doors): Liftback Date Made: ? VIN: 6T164AE9409641496 Colour: Factory silver, Now blue Engine: 4AFE
-
Not sure if we can still get a name change but could I change mine to T04S7R_AE9X
Cheers! -
Thought it was time for an even bigger change, So here we are! Got sick of the rust so decided to go all one colour. Different, but I love it!
Was going to go SX stickers for the rear doors but even though it has all SX parts, the body isn't a SX. So I didn't want to be one of those guys that put chev badges on commodores, so designed these and got them made up!
-
Thought it was time for a bit of a new look! So stickerbomb is gone!
-
Bit of an update on the ol' girl, still going strong. Got some genuine Toyota roof bars off a mate and made some wood slats for it to keep the old school look. Bonnet paint started flaking so painted it the colours of the classic Toyota badge. And made new door cards out of 3mm MDF.
-
-
Well a lot has changed since my last post! SX brakes front and rear done including the SX front control arms and swaybar.
And then I picked up the new wheels! 15x8 0 offset Dynamic D hole steelies.
Then it was time to make them fit, pumped the guards and added a fair bit of camber.
And here is the finished product!
-
Hey guys, currently doing the drum to disc conversion on my AE94 Seca CSI using AE93 Seca SX rear setup. Swapping the front over aswell with the front control arms and sway bar. I keep hearing mixed reports about whether I need the AE93 Brake master cylinder or not. Anyone know for sure? As visually they look exactly the same. Don't want to swap them if it's not needed as the AE94 has a new one in it already and the AE93 one is all dirty and rusty. Any help would be greatly appreciated cheers!
-
Picked up a AE93 SX for a parts car for $200 as the owner thought the motor was stuffed. Ended up just being the vac sensor not hooked up properly. Runs perfect now. Body is rough as so everything from that one will be going into mine, eventually the 4AGE will make it's way over as well.
Started off swapping the seats over. Top is before bottom is after.
Test fitted the SX wheels, sadly they hit the coilovers on the rear.
Chucked on the SX wing, digging it without the side sections for now.
With the SX grill.
And the strut brace.
Mainly bought the SX for the disc brake rear end, so all these other parts are just a bonus! Especially the 4AGE!-
1
-
1988 Corolla AE95 7AFE 4WD Project
in Rollaclub Rides
Posted
Big update on the old girl! She is 95% finished, just a few small things to do. Had some dramas when I first started it, started, ran for 30 seconds and then died. The engine had the same drama in the donor car which the previous owner of that thought it was fuel pump. I did end up doing fuel pump in this one any way as well as distributor. Ended up finding the culprit being the ECU had shorted out in the injectors circuit. All fixed now and running great!
Front end started going back together.
Wanted to fit up a snorkel but wanted to go something that looked as OEM as possible. Found that it was common to use a D21 Navara/Pathfinder snorkel overseas so ended up buying one from Malaysia and having it shipped over to Aus!
Obviously because it's for a different car the template was pretty useless so I test fitted it a few different ways on a spare guard first to get the final measurements.
Obviously not perfect but I love it!
Set out to start on the interior, JRP gauges in and I decided to delete the ash tray and the cigarette lighter and instead fitting up a USB charger and mounted my UHF in the ash tray slot using a bracket I made up.
Not much longer to go now!