Sirolla

Is that 1grand for an whole exhaust with headers? Otherwise, HKS ones on yahoo japan were about 700, RS*R ones i can get someone to get from Japan for $500. OBX ones from US are US$180, but are shithouse stuff. But could do with some cams down the track, 256 inlet, 264 exhaust is what i'm planning. As with those, i can run the standard ECU. Aftermarket ECUs are soo much these days, could spend the $1799 to do the head! how much for the flywheel and springs. PM me a price range so i can get an idea. Don't want too light of a flywheel, so around 4-6kg would be ideal. And no pics of the FX yet, you'll just have to wait.

Just kidding :) knew i'll get you first hahaaha.... But on a serious note, can't find anywhere to get 16v headers/extractors. One on Ebay but Not gonna fork out 1400 for a set that wont suit an ae92. i've searched: toymods, ae86dc, tocau, twincam, here, ebay, trademe, NOTHING comes up. Might just have to ring HKS Aus and see if they can source one out.

The old one couldn't handle the boost.... btw, i'm goin turbo...

Kools, nah i'm stuck at work all day til friday, so wont have time this week to do 'stuff'... You know when you'll get the head back from them? Be good to have a chat and discuss options too, but i'll just wait til i actually get the car...if it gets stuck in Adelaide, i'll go insane...lol

Let us know how that goes, did they say they're able to do all that? even blueprinting and balancing?

haha, was just kidding ya know... Yeah, soo want to get those coilovers now but bit short on cash (just payed for my swaybars! :/) so hoping he'll hold them til next week... Can i change the spring rates in coilovers, anyone know??

Would also be good if Tim can bring the SW20, and if we can convince that red hachi to come too, awesomeness!! Yeah, sounds good. Stick with Rollaclub and just feature MR2s, a GT-Four and Supras.......wait....did i just say supras? And Thanks Adam for a helping hand, you'll just do anything to see/work on the FX wouldn't you :cool:

Just redo the timing if that happens. Simple.... Yeah, i already PM'ed him on Twincam, lol. He will post them for $900, but he's too busy to make it to the post office and send them away. :/

lol, they are nice figures! :cool: I'll wait til you install your cam covers and see how they look. Most people have them off right? spend my US$80 on my amp.

Yeah, they were the ones i was planning on getting, but $400 more, i dunno, you know how much tax after that you have to pay? lots! How's your car going Andy? Will u make the show? Asked Quin if he'll enter the show, he said if he gets the car running he will be, so does look like a handful of more cars will be attending. Any chance that you'll enter us again Adam? But i like the idea of it being all general Toyota's instead of Rollaclub, since everyone who had a corolla, went and picked another Toyota, lol.

ETA for the FX-GT is: 23rd of March. Keeps getting pushed back :cool: Got a call today from adelaide saying it'll be a week there for compliance. Also have on order front and rear swaybars. Coilovers went up in price so won't be getting any now wallbash.gif but means i can get get some shock+springs which will be cheaper anyways. Also bought some rims, but they're just replacing the stock SX wheels, dunno why i bought them, but i did. You'll all see it when i put them on the car. Is anyone willing to help me out installing the bars and the bushes? I'm thinking it'll be one heck of a job, and was going to just take it to L&S, but will probably have too anyway, since some are harder to fit than others. Anyone else thinking about entering shannon's this year?

Hey Danno, how about a cruise tomorrow night, we (Adam and I are in the same league) finish bowling at around 8:30pm ish, so you can bring it to him then? Otherwise i'll come grab it off ya Danno, then i'll drop it off to him if he still has my calendars, lol

Or build a hybrid T3/T4, if thats what they call them...:wink: Hahaha, just showed that fxgt picture to a couple of my friends, they'll like whats the difference?? :) Oh birdie, my bro has a S6 RX-7 turbo if you wanna try that....Let me know

Oks, so i might not worry about the port and polish thing, as i think they're more to do with the bottom-end. As with the cams, i'm working on drivability and not on the power output. As with these cams, they are able to run on a the factory ECU (as i have read). These cams if advanced a bit will idle normally and might give me more low to mid-end power, but a slight loss in the top-end. I am of course still reading on this topic and reading other peoples modifications as well. I won't try to argue with you Adam, as you are a much bigger person when it comes down to car stuff than i am, so forgive me if i might be wrong. I am still learning. :/ I was only aiming at 150hp with the current setup, but if i did go with those mods, maybe adding an ECU will help the engine alot.

8k is so redlining it....Stock is approx 6,600rpm-7,000rpm. I think it is anyway....

What lies? i WILL be putting ICE no matter what you say Adam, :yes: It'll add weight but who keeps their subs in while at the drags or on the track? Ahhhh, some closure...thanks Danno, really, in all seriousness. With that kind of estimate, might just turn into a daily and see what i want to do after that, LOL after all that typing.

hahaha, thanks Adam, but remember, ICE i can do, but engine work, no one does it here. It'll be hard to explain to my parents that i can't drive my new car, because it doesn't have an engine in it, which is in VIC, getting some modifications. Unless you know people with equipment to do my head work, shave, port and polish, fit the .6mm head gasket, my 256/8.1 ex, 264/8.0 inlet custom cams, my adjustable cam gears, do a 5-angel valve job, install the new valve springs, install the 4-2-1 hks copy extractors, 2.25" straight thru exhaust system, the 5kg flywheel, the heavy duty clutch, fit my bush kit, install the coilovers, and a bit of guard rolling to fit the 15x7 rewinds with r888s semi-slicks....phew...be sure to let me know... Now i'm off to research, con-rods, pistons, block, and a good ECU, as i pretty much covered what i want from the head. LOL AND maybe down the track some of these: :yes:

Hey Danno, was gonna get that block 4age off ya. LOL, i've already ordered some parts for the FX, some superpro bushes, as i got em cheap, cheap! I'll do my ICE first, then i'll save up for the rest of the stuff to come. I WANT THIS NEW CAR TO SEE SOME TRACK DAYS!

Major suxor there Danno, will you pull a 'Luke' on us as well, or should be able to setup a cruise that you'll be back for? onto good news now, rolla is sold!!!! about time too, price was ok, got something back for it anyway, so that'll happen next week, plus, have to re-fax through my application to the imports people down in Canberra because i was missing some documents. And then when i get approved, it shall be on its way!! Hopefully by the end of the month, fingers crossed! I can't wait!! :) :P

Doesn't look to shabby there Danno. Nice work! :D

Well what good is that? I'm an Anime collector as well, though in 'computer form' as Adam puts it, lol :P As if i have money to spend 'buying' DVD'd Anime series. He must have money.....:/

Yeah, I was listening, didn't think you mean the Ozzy here in Darwin, i'll get my friend to give them a buzz as he knows the owner. But will do that when the car arrives, having slight problem with the people in Canberra atm, approving my import notice. got a reply back, the guy wants $820 delivered to Darwin, for his Rewinds, but i'll see how much they are at ozzy, and spend the extra on some good tyres. Just saw your topic on that Initial D parody Adam, who's ya friend, i've got 1.5tb's of anime if he's interested in trading some series, i've lost one of my HDDs, so trying to find someone who has what i lost so i don't have to download them all over again.

Nope, not really, was searching on boost, and some guy in Brissy is selling them, well if they're new from ozzy, then i might contact them when they have them in, as i think they're outta stock. Or else Kspeed reverbs from Tempe.

hahahaaha, The only thing it'll have more on it is the price tag i'm getting it for (have a guess if you want) Anyone think that HIDs are rice? and Adam, $800 worth it for 15x7 rewinds, comes with tyres, in a 4x100 stud pattern. gunmetal with a polished lip, for the fx?

Since the one i'm getting is an '88 model, its pretty much the same specs as the AE92 SX, but i got one with a Bluetop 4AGE, power windows, power steering (YES!!!) and some had a factory sunroof. Birdie, if you want it, you can remove it yourself and put the old one back for me and redo all the vacuum hose lines that Hi-tech cut off the old one...But otherwise, its staying on the 6A.