ae824ate
-
Posts
600 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by ae824ate
-
-
Very strange to see a single down draft, would be interesting to see how she runs.
-
Nice job Dave, not messing around are you haha.
Cool project.
-
-
Might pop around soon and have a gander, I'm heading into town shortly.
-
Hell yeah, any more pics of the fabrication work?
I'm assuming it tubbed?
-
No, you shouldnt buy it. Nuff said.
-
Unless it was an emergency, why the hell would you? Spatter in your sump, porosity all through your welds, just dodgey in general, not hard to rip the sump off and do a proper clean job.
And who the hell calls spatter (not "splatter", that really annoys me) weld offs? Never heard a kent say "weld offs".
-
Bump, don't have a cable for my phone but will upload more pics when i can.
-
Thats the way Scott, i was wondering about this thing a while ago.
Awesome work!
-
Definately noticeable, but not as good without a cam and exhaust to go with it...
Its dirt cheap compared to other options. You need the carb, an air cleaner and an adapter plate, so a couple of hundred bucks.
What options would you consider?? DCOEs, SUs, injection, twin stock Aisans??
Honestly, if you just throw a weber on (jets tuned or not) it makes fck all difference. You wont feel it a great deal. Like altezza said, with more work done to the engine they become a valuable upgrade. Cam, exhaust, bit of head work etc
-
Hey Luke, the heads are fine to swap, as long as they are the same (big/small port) although the camshafts had different lift and duration, does the gze loom have any extra sensors over the 4age? I can't remember.
Club4ag.com has alot of useful specs on the 4a series.
-
Google search AE82 body kit.
And don't put fender mirrors on it, you will be a laughing stock.
Not much is easily interchangable, apart from twin cam 'ae82 parts, but you can make anything fit with modification.
-
Gday guys, i bought this about 6 months ago with an inboard 253 V8 and jet unit (now sold).
Fully stripped the boat to the hull, stringers and bulkheads were rotten as. The hull is solid 10mm fibreglass (no timber), and having the inboard didnt have timber transom (just 8-10mm glass).
The hull is in great shape, only holes are from the jet unit intake and transom exit. The trailer is rusted to buggery (still kinda towable), so will need a tow truck to move it.
I had intentions of fully renovating her, I still might. But i will soon be back to 7 days a week at work, and i have my car and smaller boat to work on. can't remember the manufacturer of it, but the details are on the old rego papers.
She is a deep V displacement hull, so sits deep and solid in the water, with a VERY solid glass hull, a perfect base for a project.
Will try to put pics up when i can.
Would be an awesome father son project or similar, just don't see myself having the time for the bigger boat.
Located 20 minutes from Toowoomba, any questions PM me here, or message Luke 0458526243. Sorry about the breif add, ill update when i can.
Asking $500, don't be scared of the project.
Cheers guys.
-
Engine bay pic= porn!!
Looks friggin awesome mate, I reckon the offset with the wheels and the stance is pretty spot on, i prolly wouldnt bother with spacers.
can't wait to see her finished, good job mate.
-
Oh dear, where do i start?? Its a fkn long story (thanks for not including me), ill comment tomorrow when i have the time, and don't have the kids. Good to see a thread up Zowie, keep this one mate haha.
-
Yeah Trev, it was stuffing up trying to load RC pages.
Damn, i forgot the ol' 710 cap, sorry Zowie mate, it wont happen again haha.
Thanks for having a look anyway Luke, Its appreciated mate.
Thanks guys, you are all good men!!
-
Awesome, thanks Trev. Was gonna show how i did mine,and thats how i connected it up, internet is fking up!!
Again, thanks Trev, you're a champion.
-
Gday guys, just wanting confirmation of how the hoses are run. I have just replaced the leaking heater core in the new twinky and really hoping someone can post a pic, or help me out with this. Its been a long time between twinkies.
I made a crude diagram of the basic pre thermostat heater components (throttle body heater tap, heater core and thermostat housing).
Ill post another of how mine is plumbed, any help is greatly appreciated (cmo carbonboy and trev).
Cheers in advance guys, Luke.
-
Is it a pull switch as well or just a twist?
And what the heck is it out of?
-
Are you lowering it for looks?
Do you want it to handle better?
Any other suspension mods?
-
Ill take them to work, tape the polished lip and sand blast em mate, be easier without the rubber though.
don't say i didnt offer :P
-
Weld hubs and re-drill, done it before. Ill find a pic for ya.
But, then you need to sort out brakes etc, complete strut conversion prolly simpler.
A crude comparison, but you get the idea...
-
Bugger, how is your sister? Was it insured?
-
7agte???
Turbo 4K Not Firing
in General Mechanical
Posted
Listen to this man. He knows his shit. Been a while guys, will be good to catch up.