Clutch Master Cylinder Rebuild

[Sim]

I have an Aisin clutch master cylinder from a late 70's model celica ill be using on my panelvan, it was already in the car when i got it but had been leaking at some stage so the firewall etc is a lil bit eaten around the clutch master. anyway I'm wanting to know of any places in melbourne that can re-seal/re-sleeve my clutch master. i found a place in the US that can supply me with a brand new one but with the aus $$ the way it is atm it wuld cost me $110 just in postage to get it here, so rebuilding the master seems to be the better option.

any help would be great!

cheers.

[DearmanKE]

you can get new masters for ae71's here for like 30 bucks, same as sprinter one

[Taz_Rx]

Hey buddy, I had a re-sleeved clutch master in my rx4. Started leaking again about 3 weeks after the re-sleeve. Bought a brand new one from Sparco for like $80 and have not had an issue since in the last 6 odd years!!

Highly recomend just buying a new one. :bash:

[Sim]

thanks for the advice, i ended up going to a local brake joint yesterday during work to have a chat, ended up getting a new ae71 clutch master, cost $45 which is good enough. just need to clean up the butcher job the previous owner did to the firewall to mount the old clutch master!