Quick Answer 3k Flywheel 4k Clutch

[springersrolla]

hey lads need some quick info as I'm buying a 4k clutch today i have a 3k flywheel that has a fresh face and has been machined, i have a k50 sitting at home and a fresh 3k motor. My question is will i have any dramas mating a new 4/5k clutch to my 3k flywheel or do i need to put a 4k flywheel on to suit the clutch? I intend on running a 5k eventually. Also any dramas with fitting the k50 gearbox crossmember to where the k40 sat i understand ill have to cut the tunnel to fit the shifter. Cheers

[Taz_Rx]

No dramas with using a 3k FW and a 4k clutch. As 5k's come from liteaces they use a different 200mm clutch plate and FW, where as 3k and 4k ones are 180mm.

 

K50 will slot into the 4k clutch no worries.

 

I don't know what car this is for?......but if you have a ke3x-5x and use a ke3x-5x k50 you won't need to cut the hole bigger. If you use a ke70 K50, then you will. k40 and k50 have the same cross member position also.

[springersrolla]

thanks heaps for the quick response mate i should be getting that clutch today off my mate at trade price the k50 is from a ke70 going behind a 3k in a ke35 should go off without a hitch by the sounds of it. Thanks again