I have an AE86 GT-s Gauge cluster that I will be putting in my 1980 Toyota Corolla Liftback with a 3TC and T50 tranny, the stock gauge cluster also has a tachometer. Just doing the change because of the rev limit and speedo is higher. I need the color coding of the 1980 TE72 Corolla Liftback Gauge Cluster wiring and I need the AE86 GT-s wring confirmed, here's the AE86 GT-S Gauge Cluster wiring color coding that I have, just need to make sure that it's correct:

 

White Plug:

Black/Brown = Tachometer wire (goes to ignition coil)

White/Black = High Beam Indicator -

Blue/White = Speed Sensor +

Tan/Black spot = Speed Sensor -

Red/Green = Door Indicator +

Red/White = Door Indicator -

Red = Seat Belt Light

Yellow/Blue = Fuel Light

Yellow/Red = Fuel Meter

Tan/Black spot = Ground

Green/Black = Left Signal

Green/Yellow = Right Signal

 

Blue Plug:

Black/Brown = Dash lighting ground

Green/Brown = Dash lighting

Yellow/Green = Water temp meter

Red/Blue = Power source

Red/Black = E-Brake Light

White/Green = Check engine light

Second section of blue plug

Yellow/Black = Oil Pressure

Black/Orange = Charge Indicator +

Yellow = Charge Indicator -

Red/Green = High Beams indicator +

I'm not sure if i have directed you to this link before, but the full USDM electrical wiring diagrams are here, which will at least enable you to check the GTS wiring.

 

http://www.aeu86.org/index/technical-ae86-...at/9/topic=5158

Nope you haven't but this will help for sure, thanks. All I need help with now is the TE72, here's a copy of what I got from somebody: