Hey guys I think I might have seen this info around on the site a few months ago but I've been searching for a while and I can't find it so I thought I'd ask.

 

I've got a mate that's just bought a ke10 and he is in need of front lower control inner pivot bushes, front leaf spring eye bushes and a left hand lower control arm in order to get his car to pass a RWC.

 

Apparently the place that's fixing his car up can't find these parts anywhere. Does anyone on here know where he might be able to get these parts or know any part numbers or anything?? Located in VIC.

 

Thanks in advance, Brent.

here ya go matey!

 

http://www.rollaclub.com/board/?showtopic=31329

 

good luck!

Thanks mate, your a life saver.

Tried calling a heap of places this morning, all had pretty much nothing.. the only part that we can find is the eye bushes..

 

Does anyone know if the lower control arms are interchangable with ke20 etc.. one place we called gave us part numbers for the lower control arm and when we looked it up in the catalogue it turned out to be under ke20.. :dance: It would be good if they were, ke20 parts are way easier to get.

 

We did find out the genuine Toyota part numbers for them all.. just can't find the parts. Its prooving to be pretty difficult

 

If anyone has any other help of ideas for the other stuff the info would be appreciated.

 

Cheers Kyle.

the control arms themselves are almost certainly not interchangeable, but there's a fair chance the bushes might be.

The KE1x bushes are quite different from the KE2x. 2 bushes per arm vs one bush.

 

Facing the same problems as you, I just managed to pick some up in Japan.

 

 

 

 

 

Unless some new old stock turns up somewhere, you may need to get some turned up in urethane, using your shells to guide measurement.