VR42LT Posted March 5, 2010 Report Share Posted March 5, 2010 Gday guys just a quick one can i convert an auto ke20 to manual what needs to be done,cut or removed any help would be greatly appriciated. Wade Quote Link to comment Share on other sites More sharing options...
AE25 Posted March 5, 2010 Report Share Posted March 5, 2010 Gday guys just a quick one can i convert an auto ke20 to manual what needs to be done,cut or removed any help would be greatly appriciated. Wade yes. buy the manual parts and bolt them in. trim the shifter hole to suit. join the 'neutral start switch' plugs together or engine wont start. ie early type k40 or k50 gearbox (kp61 or ke55) driveshaft flywheel clutch clutch cable manual pedal box Quote Link to comment Share on other sites More sharing options...
7FOUR7 Posted April 20, 2011 Report Share Posted April 20, 2011 didn't want to start a new thread. So I don't need the manual spiggot bearing I just bought? Quote Link to comment Share on other sites More sharing options...
basher_ke20 Posted April 20, 2011 Report Share Posted April 20, 2011 didn't want to start a new thread. So I don't need the manual spiggot bearing I just bought? yes you need the spigot bearing Quote Link to comment Share on other sites More sharing options...
7FOUR7 Posted April 20, 2011 Report Share Posted April 20, 2011 ok thx. Am I correct in my assumptions that auto doesn't have one? Cause I can't see one in mine and the input shaft for the box is splined right to the end unlike the manual Quote Link to comment Share on other sites More sharing options...
jegankp Posted April 30, 2011 Report Share Posted April 30, 2011 don't want to start a new thread on this too. My Ke20's gearbox is completely screwed. its stuck on 3rd gear, and i can't free it. not when i step on the clutch, not when the engine is turned off. i can't move the stick too. Some mechanics told me that it might be that the Clutch plate is screwed, but I'm not entirely sure. because i can't move the gear all together. i want to change the gearbox to a 5 speed manual. but I'm not sure which gear box to use, and which will fit?! help or advice guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.