hey guys i searched on here but couldnt find a direct answer

has anybody used the "Sports Tuff HD Clutch kit" by Exedy for a K box before and had any issues, I'm swapping my ke70 to manual and it needs a new clutch. ive heard mixed opinions about exedy and extreme so thought i might try get some answer by people who have used them.

while were on the topic for clutches,

 

does anyone make a 19 spline 5k clutch? cushioned button? etc etc

Exedy in reply to both Posts.

 

I used a Exedy Sports Tuff in my 30, I recommend it!

 

TYK-6036HD for the HD

 

and TYK-6036HDB for the button variant.

cheers slo-030 ill go into autopro tomorrow order the TYK-6036HD as a button would be over kill for a stock 4k with a zorst and electric fan haha

Button part number was for Ev dogga.

 

Remembered the 5k is a 200mm clutch.

 

Dunno if they do a 200mm kit with a K series friction plate?

 

Unless your running a 4k flywheel?

Button part number was for Ev dogga.

 

Remembered the 5k is a 200mm clutch.

 

Dunno if they do a 200mm kit with a K series friction plate?

 

Unless your running a 4k flywheel?

 

 

Evan - To put a k40 or k50 behind a 5k you have to use a 180mm 3/4k flywheel. There is no (off the shelf) kit to allow you to retain the 200mm 5k flywheel.

nawwww fork! will a h/d 4k clutch hold up behind a abused 5k? chirping 2nd when requested and when towing?

Stood up to my abuse in the KE30.

Maybe see if they can do a 200mm clutch with the K 19 spline?

 

I know a 4age pressure plate bolts up to a 5k flywheel, so there's deffinatly a sports tuff pressure plate to suit.

just had a look under all the 4age's and they seam to be all 21 spline?

 

if the 19spine 180mm will take the abuse ill be happy

Maybe see if they can do a 200mm clutch with the K 19 spline?

 

I know a 4age pressure plate bolts up to a 5k flywheel, so there's deffinatly a sports tuff pressure plate to suit.

 

In the theory it'll work but the 200mm pressure plate won't fit inside the bellhousing..... been there, done that after buying a $400 (mates rates) clutch! :bash:

Into a KE70 bellhousing it will fit. According to what i've found on here :hmm:

so for a 5k with a ke70 k50, the part numbers for a exedy button clutch is what you give me in my thread ryan????

Into a KE70 bellhousing it will fit. According to what i've found on here :hmm:

 

Possibly. Deffinately not a KE30/55 box OR a cable K-T bell.

 

For what you'd pay to get the custom clutch plate made, compared to sourcing a 180mm FW IMHO I think you're better off just using the normal 180mm kit.

how much are the hd clutchs?