Hey guys and girls

 

At the moment i have a corolla ke70 (slanty front ) is was woundering if their was some information on how to convert

it to the flat bonnet which in my opion looks alot better. I have already have a ke70 Flat front donnar car ,

but the bonnet is bent so I'm also looking for a flat bonnet to :)

 

Thanks for the input and time guys :)

 

Cheers Josh

Heaps of info,use the search function top right of page but generally you need to swap-

panel in front of windscreen

bonnet

left and right guards

stone tray

radiator support panel (unless you modify existing one for mounting of lights etc as they are not a straight swap)

Think thats it but as I said,check search or wait for someone to correct me if I'm wrong!

i'm under the impression the panel in front of the window stays the same... mine seems to fit and i just did the conversion.

The dbking had a flat front panel and modified a slant bonnet to fit (trimmed the edges over the lights), looked mad as with the "angry eyes" look.

 

http://www.rollaclub.com/board/topic/46787-ke70-panel-van/page__p__483396__fromsearch__1#entry483396

 

Might work on a normal FF, but havent seen one.

i'm under the impression the panel in front of the window stays the same... mine seems to fit and i just did the conversion.

Ok,just thought that I had read a post here where the panel was changed,maybe just done for the hell of it because they had it.

oh yeah i read that as well, it's hard getting accurate info about this because no one says the same things really.

there is a write up in the FAQ section for this by the way.

there is a write up in the FAQ section for this by the way.

yeh! as I said in first post,check search function,answer is bound to be there!Just thought I might of made it a little easier to begin with..