alright.... in my ke70 i have a dash cluster with taco... but on the back of the cluster the green.... thing is starting to come away from the actual cluster itself. which i think might be the cause of my dash lights, fuel and temp gauge not working.... (note i said i think) but the stange thing is that some lights on it work like the brake light, hand brake light, high beam light and all the idoit lights...

gday - I'm pretty sure that the green plastic film has the circuit integrated in it, so it shouldn't matter if it appears to be separating from the back of the cluster - when my fuel gauge stopped working it was because the circuit which

appears to be very thin brass had a tiny crack (probably cause the plastic was brittle and warped), so i soldered it back together and haven't had any more problems with it .......

oh shitt alright then umm would that be the same with how my lights on it wont word? and thanks heaps man i didnt think anyone would reply haha

hey mate i looked over the back of my cluster and found none of the little conection your talked about are broken??

heyy bro got a mulitmetre, set to 20volts and test the light wires and fuel (ignition on)

that will allow u to determine if the problem lies within the dash

cheers and good luck

scott

heyy bro got a mulitmetre, set to 20volts and test the light wires and fuel (ignition on)

that will allow u to determine if the problem lies within the dash

cheers and good luck

scott

 

 

 

 

hey thanks for that man. i will give it a look and ill tell ya how it goes.

have u checked your fuses ?

have u checked your fuses ?

 

 

yeah me and my mate did a while back. he took some from his work so they should be all sweet? ill get some new ones and see how it goes.