dbr11k Posted July 3, 2011 Report Share Posted July 3, 2011 why is alcohol always involved in spring cutting ? haha Quote Link to comment Share on other sites More sharing options...
t18drifts Posted July 4, 2011 Report Share Posted July 4, 2011 we had the springs out completly we wanted to see how low it was on bump stops it was still legal at 115mm from the ground at the lowest point the limit is 100m so yeah good times Quote Link to comment Share on other sites More sharing options...
dbr11k Posted July 4, 2011 Report Share Posted July 4, 2011 yea i'm not against spring cutting.. not really a fan of it either but... as long as decent stiff shocks are used i reckon its fine.. and i normally cut two things off the rubber bump stops when cutting springs.. so it still has a bit of travel in it. Quote Link to comment Share on other sites More sharing options...
t18drifts Posted July 4, 2011 Report Share Posted July 4, 2011 ahhhhhhhhh :happy: ok i shall tell him then Quote Link to comment Share on other sites More sharing options...
CommonhoreSlayer Posted July 10, 2011 Author Report Share Posted July 10, 2011 Ok crosmember is done and fuel system in 90% done now i need to extend the tailshaft was thinking of cutting the ae86 and ke70 shafts and machining a piece to fit inside each and extend it 40mm then weld it in has any1 done tailshaft extentions before and will it need balancing? Quote Link to comment Share on other sites More sharing options...
Chillin Posted July 10, 2011 Report Share Posted July 10, 2011 Just take it to a shop mate, all of their fab work will be covered by some kind of warranty and they will do it once, and do it right. I'm not doubting your fabrication skills, just for the little expense they charge it will give you peace of mind. Best of luck with it! Quote Link to comment Share on other sites More sharing options...
ridleyy Posted July 13, 2011 Report Share Posted July 13, 2011 hey mate just wondering what clutch setup you have running for the 4age needing to do one for mine and would be very helpful Quote Link to comment Share on other sites More sharing options...
CommonhoreSlayer Posted August 6, 2011 Author Report Share Posted August 6, 2011 havnt been on here in a while but thanks to my new mate Dan the 4age is finally alive :D and ridley the clutch is a stock ae86 as far as i know Quote Link to comment Share on other sites More sharing options...
t18drifts Posted August 7, 2011 Report Share Posted August 7, 2011 yay happyness :dance: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.