Ke10 Indicator Problems -_-

[kamakazeKoala]

gday, to top the brake issues off, now having trouble getting the indicators working properly, right side was working perfectly but had nothing coming from the left, replaced the flasher relay (can), and the right still works fine but the left clicks a few times, really slowly then jus clicks at random every now and then when the left indicators are SUPPOSED to be on.... know its a long shot but if anyone has had the same problem any help on the subject would be greatly appreciated :)

 

video to show whats happening :) http://www.youtube.com/watch?v=k_QzSUaFuhY

[Jordain]

just pull the dash out, check all your earths with a multimeter. Most likely an earthing problem

[kamakazeKoala]

wouldnt happen to have a wiring diagram :) or some way of telling me what I'm looking for, both the front and rear indicator lights arent coming on, and the dash light is staying off as seen in the video, would that be due to a earth problem or to hard to say ??

[Alexrx7]

I was having the same problem replaced all my bulbs headlights park lights etc and that fixed it. Even one bulb that's on it's way out can screw with the rest are any of your bulbs dimmer than others?

[kamakazeKoala]

brakes and reverse are fine on both sides, head lights work perfectly, not dim or anything, jus left side indicators that have called it quits, changed the bulbs over on the indicators and still nothing

[kamakazeKoala]

Scrap the reverse working on left, replaced globes and fuses all round, left side brake is only thing working on left side...., with the dash out what wires am i testing for earth, and how do i test em, sorry for all the questions, jus I'm not a sparky but i want this stuff fixed asap

[Guest pmp16]

Check that all ur light housing are earthed out properly I had same problem and it ended up being housing wasn't tightened up properly

[Guest pmp16]

What's ur number mate I can send

u wiring diagram for Ke10 ..

But I'm

almost certain to

tighten all the bolts up

that put indicators on car they must be loose n not earthing. Properly

[kamakazeKoala]

Jus had the front indicator housing out and tightened it fair tight against the car, is there and earthing part for the rear light housing

[Guest pmp16]

They all bolt to the car there should be 2 bolts on each side at front and 4 bolts on each side at back

[kamakazeKoala]

all housing bolts now tighter than a nuns asshole,and still nothing, have even changed all bulbs in the dash, really dunno what else to do?? :bash:

[kickn5k]

Have you checked the combination switch? The contacts might just need a clean.

 

Stu.

[kamakazeKoala]

anyone know of a cheap, good auto elec in adelaide, don't really know how to get to the combination switch, really need it done tho :bash:

[kamakazeKoala]

Sorry bout the late update, have fixed the problem, was a spring inside the combination switch, had compressed and not come back up not letting the terminals touch to send power to the relay and back to the lights, stretched the spring out and all seems to be working now, Thanks for all your help guys :)