Alright guys ive bought a 84 ke70 sedan as a rolling shell so no motor,gbox,tailshaft

 

but i ve bought everything except the gearbox for noe as i want the K50 and none are forsale around brisbane ANYWAYS back to where i was

 

i have no bolts or nuts to install the motor onto the cross member, attaching gearbox to motor and same with tailshaft

 

so my question is what size and length do i use for this !!

 

your suggestions and help would be greatly appreciated !!!

 

Also Admin/Moderator move if need be :)

Yah I need a engine-to-gearbox bolt too...

 

Best bet is to scrounge the wreckers for nuts n bolts IMO.

yeah i don't know of any wreckers wrecking out the stuff i need aye :/ i thought someone might of known the size and length of them :( seems like i wont be able to get the running gear in this weekend :(

Well it's just basic metric stuff. If you have at least one of what you want, the rest won't be impossible to source. Don't give up!

could someone beee sooo kind enough to pull a gbox bolt out and tell me length and size, and the tailshaft ones aswell ??? i don't expect this to be done but my god if you could thatd be absolutely amazing !!

its algood i found a few that came in some zippy bags to bolt the gearbox to motor so I'm going to go bolt n nut shop tomorrow !!!! do I'm only after/ more info about the tailshaft ones and the engine rubber mounts and the bolts to attach motor to mounts/xmember

anything that fits is usually rough enough

I'd tell you the wreckers in Brisbane that has a dozen KE's that you could easily get the bolts you need, but then the secret would be out.

Do they still let you in there? Last I heard they weren't allowing pick a part. They are serious rip off merchants anyway.

On the northside Reed? I dropped the name of a Celica dude who sent me, so maybe I got lucky.

 

A week ago I picked some higly-rated KE30 front and rear bumpers with all lights, indicators, bolts and end/body rubbers, driver and *passenger* rear view mirrors, clutch cable E-clip, and miscellaneous driveline and body bolts for one-fiddy (it was all the cash I had on me, talked him down from two-hundy).

 

"I get $144 each for those bumpers mate", he reckoned.

 

So, not cheap - but blinged out my KE55 sedan nicely. Must do a rides thread soon.

 

There was an average chrome '55 wrap-around/pointy rear bar that I'd go back for, as my XX coupe has body colour bumpers. blurgh.

Yeah sound like the same one. I got xt130 steering arms from there and couldnt get them off the lcas so he threw them in for $40. Sometimes you win. can't go there after the rain, the old toyota section turns to a swamp.

Boss wreckers in Tingalpa used to have stacks of ke70s, but the last time i went there (6months ago), hardly anything older than an AE92....

some wreckers will do buckets of bolts/nuts for 5 or 10 bucks