B-Lugg Posted April 20, 2014 Report Share Posted April 20, 2014 I'm currently trying to source a T series diff to through in to the AE. I have found a whole bunch of information on the Series 2 T18 diffs which to my knowledge are a straight bolt in swap. However I have come across a series 1 T18 diff that I can buy but being series 1 doesn't have the sway bar mounts on the diff etc. I was looking to grab more information on what is required to fit the Series 1 Diff complete with swaybar and just to confirm that the series 2 will be a bolt in swap. Thanks. Quote Link to comment Share on other sites More sharing options...
B.L.Z.BUB Posted April 20, 2014 Report Share Posted April 20, 2014 S2 full bolt in swap, you just need the rear half of a T Series drive shaft. S1 is identical bar the sway bar mounts, though you can weld on ones from your old diff or there are bolt on mounts you can buy from Whiteline etc. Quote Link to comment Share on other sites More sharing options...
LittleRedSpirit Posted April 20, 2014 Report Share Posted April 20, 2014 Yes just bolt it in and then you can bolt the bar to the car, swing it up and weld where it contacts the housing with the mounts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.