Hirst Posted September 15, 2007 Report Posted September 15, 2007 Have been studying wiring diagrams from Toyota and Daihatsu in an effort to figure this out, but I'm just not 100% sure. Basically, I need to fit a tachometer to my car. Unfortunately as my car is a Charmant, I can't just swap in a tacho version dash like you guys - they do exist, but they're so rare that I could be waiting literally years for one to turn up (if one ever does). So I bought an Omori gauge which rather optimistically goes up to 10000rpm. Then I took out all the surrounds etc. and was a bit disappointed to find that the wiring connectors are different to the KE70 ones. However, I suspect that the wires themselves may well mean the same thing! So I'd just like someone to confirm whether these wires are largely the same as the KE70 ones and which I need to "tap" to get my Tachometer on. On the left hand side we have this: This controls the "Stop" Warning Light, Oil Light, Battery Fill Light, Battery Light, Fuel Level. On the right hand side we have this: This controls Headlight, Door Open Light, Parking Brake Light, Battery Fill Light (again?) and the Digital Clock. I suspect that the Brown/Black wire on the right hand side is for a tachometer. According to translated Tachometer instructions I need 4 of 6 wires hooking up (others are a redundant one and one for an external shift lamp): Black - Earth Red - Ignition Plus (does this mean power?) Green - Minus Coil Ignition (suspect this is the one for the brown/black tach) White - Lighting Would appreciate any help I can get!! Quote
Trev Posted September 15, 2007 Report Posted September 15, 2007 Just run your power from the ignition and light feeds and your tacho feed from the negative side of the coil, It will save fukin around. Quote
Medicine_Man Posted September 16, 2007 Report Posted September 16, 2007 Topic from the FAQ that may be of interest.. http://www.rollaclub.com/faq/index.php?tit...Tacho_Into_KE70 Quote
Hirst Posted September 16, 2007 Author Report Posted September 16, 2007 Yep I had a look at that, does anyone know which of those wires are responsible for the lighting circuit and ignition? Quote
Medicine_Man Posted September 16, 2007 Report Posted September 16, 2007 This might help also, Was trying to find the original link on here, couldn't upload the .pdf so I just turned it into a .jpg for you.. Quote
rolla20 Posted September 16, 2007 Report Posted September 16, 2007 yeah hirst , the easy way is just hook it up like this BLACK ,, earth, body of the car RED .... power , ignition ON on your key GREEN.... your minus side of the coil WHITE.... cut into you parker wire an join into it simple mate ,, easy 20minute job , adam Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.