Stefan Posted January 30, 2008 Report Posted January 30, 2008 Hey everyone put new lca in my sprinter and the alignment is off bad enough that i can't drive it,. just wanted to know what the procedure is to get the wheels straight enpugh to drive the car to a shop. Any help is apreciated, cheers Stefan. Quote
thomo Posted January 30, 2008 Report Posted January 30, 2008 tape messure, inside tyre to inside tyre across front end, front of hub, rear of hub, adjust till their about the same distance, go to tyre shop :hmm: Quote
PNK70 Posted January 30, 2008 Report Posted January 30, 2008 meaure the thread of each side ect like 1,2,3,4,5,6,7,8,9 then u hit the bolt make it that either side and check the angle of the rim be better if u had something to put under the wheels to make them slide on angles when u lossen or tighten or the bolts will be screwed in no time Quote
Medicine_Man Posted January 30, 2008 Report Posted January 30, 2008 How far is it to where you are getting the alignment done? Just eyeball it and drive it there if it is close.. Quote
styler Posted January 30, 2008 Report Posted January 30, 2008 (edited) you can do a wheel alignment the old way with string, wood studs and some chalk i think. might have to look it up on google or something... Edited January 30, 2008 by styler Quote
Stefan Posted January 31, 2008 Author Report Posted January 31, 2008 kewl cheers every one will do the tape measure way and check using the threads. Thanks heaps Quote
towe001 Posted February 1, 2008 Report Posted February 1, 2008 http://www.honda-tech.com/zerothread?id=597192 http://honda-tech.com/zerothread?id=267237 Also google for "simple strings wheel alignment" Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.