greenmac80 Posted April 6, 2008 Author Report Posted April 6, 2008 sorry mate didn't even think... soo tired after speniding the day running around and workin on my corolla! cheers Quote
fusion Posted April 6, 2008 Report Posted April 6, 2008 NP. Hope to see progress pictures :dance: Quote
greenmac80 Posted April 7, 2008 Author Report Posted April 7, 2008 kaizen garage make rwd 20v extractors never heard of them and how much? ajps have them but they are stainless and very expensive 900 bucks. i'm only looking to spend 400 max! if possible Quote
Golberg Posted April 7, 2008 Report Posted April 7, 2008 also from a t18 i would recomend u use the t18 one as the slave is opposite the exhaust differences ae86, ae71 t50 = 20 spline t18 = 22 spline ull need a t18 front half shaft to use the t18 box Sorry to be a bit off topic, but is that to say 3T engines have the same bell housing as on an 4A T50. i.e. T18 box will bolt up to a 4A series engine no mods? Quote
Guest Sbox Posted April 8, 2008 Report Posted April 8, 2008 (edited) Deleted Edited May 24, 2008 by Sbox Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.