fusion

silverra23, may have this wrong but do you still own the KE35? Swear I say it in its racing livery on the back of a tow truck near Tamsworth (country music captial place). Nearly lost it when I did :laff:

Dave from AJPS got me a strut brace from Japan for my TE71, but thats because its counted as a series one T18, which meant KE70 didnt fit. The Cusco that came was worth the wait though. Like the rest said get your bushes done, will make a big difference. Sounds like you already got some decent tyres. Personaly I wouldnt go for a rear swaybar, especially an adjustable one, but personally I usually either don't run one or stick with the stock swaybar. In the T18 I would be looking into a steering rack conversion. Steering box is so crap Cheers Fusion

AJPS Coilovers Dave can help you out. Depending on how serious you want to get, depends on how much money you spend. Usually use AE86 bare struts and chose your shock / spring options from there.

Pretty sure I spotted this beast at Villis a couple of weeks ago. Damn you've done a nice job on this car :laff:

Well theres not much that sperates them when you think about it. Personally being bias I would be going a 2TG. Although parts in the future for a 4AGE might be more easily sourced. Main difference is 4AGE will require an ECU I'm presuming Would the 4AGE need cams straight up to make the most of the ITB's? Along with proper tuning I'm guessing (Sorry haven't had much experince with 4AGE's :laff: )

Since you (without sounding rude) don't know a heep yet heres a good option. Keep the 3TC. Get some extractors, electric fuel pump, thermo fan, twin Webers and maybe a mild cam. It will have plenty of torque and will love to rev. And sounds great. Run that for a while, get use to it, keep things simple. And more importantly save some money while having fun. With the money saved / time your spending having fun, build up a 4AGTE with an AE71 crossmember to bolt straight in for the future.

Theres not really a huge avaliability for parts in relation to the stock engine itself. If you spent some coin, and beefed it up with a new tubo, manifold, plenum, ECU etc that would reduce the risk, but it still stands the internals could let go. If your really worried, your best bet (dare I say it) would be to go a 4AGE and turbo it. That way you can also convert to rack and pinion at the same time

So unfortunately things have been delayed a bit in relation to parts, but no biggie. Don't have the cash or time at the moment to for the plans anyways 1) Got an AE71 crossmember, rack and steering coloum. Planning to use this for the rack and pinon conversion by welding on new engine mounts. Rather play with engine mounts than steering geometry. Thanks Luke! 2) Got new steering rack bushes, boots, rack ends, adjustable tie rod ends on the way. Along with a quaife rack (still can't get the hang of the spelling :happy: ). Before the conversion happens, the rack will be sent off the the above goodies and fully rebuilt / setup properly. Also found a great guy who is going to help with rust repairs in the boot floor, boot seal and rear lower quarter panels. I will also be getting him to do the steering conversion after Regency. Should hopefully happen in 2 weeks time. Depending if I am in Adelaide or not . . . So these plans, along with some coilovers, should see the front end completed to the specs I want it pretty much for now. Cheers Fusion

I think I might know the one your talking about now. I think there was something similar for sale with the 3SG package. O and while I'm at it. A few goodies will be arriving in about 2 weeks. So big update than . . . and maybe some pictures :happy:

Well there you go! Has it had a repsray or something? No fender mirrors and it doesn't look like GT stripes down the side

"Can you be my daddy" Yes I realise how creepy that sounds, and I don't care :laff: I just have images of me as a kid on it roaring down the driveway pretending I'm a race car driver :lolcry:

Hey guys, Hoping a member could share his previous experinces with someone who does steering setups as such. Converting the car to steering rack, but want it all rebuilt beforehand, most likely including the setup of a quafe rack Any tips? Cheers Ross

Gee thats a sad day if they are. Brendan and Dave are great guys. If they are, maybe you should ask Dave about rebuild kits for the 2TG. Pretty sure he would have all the parts

Nice find, where did you pick that up from? Not many places at all would have something like that in SA haha And is it just me or does it sound funny in the top end of the revving? Doesn't sound as . . . throaty?

It wouldn't surprise me if Jay saw it on there and brought it back with him from a trip to Japan. I know hes imported a few cars before. And thanks, all I can do is try. Hard part is being paitent :D