canna Posted September 14, 2008 Author Report Share Posted September 14, 2008 (edited) time for an update things have slowy been geting done heres some pics of the gards primed heres the body the boot lid Edited September 14, 2008 by canna Quote Link to comment Share on other sites More sharing options...
canna Posted May 25, 2009 Author Report Share Posted May 25, 2009 Hello all, Havnt had a chance to work on my rolla much due to injury. But now I'm all better and thing are full steam ahead. Before i hurt my self the car was pretty much ready to be painted so it just sat there for 4 months with out me being able to work on her. all dusty. With my fuel cap So it got painted at the start of februry in um a can't think of the name. i have it some were. Half way It still will need to have a cut and a polish But now iv been slowy putting her back together. I have the front seats in no. They are a bucket seat of some kind, ill get some photos for you. I use the orginal seat rails for them too. Other plans are to lower her, 13 inch jelly beans. tint the windows, zorst and enjoy. But i have some more plans for her. So what does evey one think good or bad please let us know Cheers Jamie Quote Link to comment Share on other sites More sharing options...
Ben-89 Posted May 25, 2009 Report Share Posted May 25, 2009 I like it a lot, from a $200 car that It was you have done a really good job. Keep up the progress and this will real nice. Good choice on colour too, as it suits the era of the car. Keep us posted and keep up the good work.. Ben. Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted May 29, 2009 Report Share Posted May 29, 2009 I like you little alloy bits, noticed you've been selling some on ebay. Just on the fuel cap though :hmm: ...... Do a google search about mini's, specifically their fuel cap and how they where a major issue when crashed. Yours won't be anywhere near as bad but just some food for though. :rolla: Quote Link to comment Share on other sites More sharing options...
canna Posted May 29, 2009 Author Report Share Posted May 29, 2009 (edited) Thanks, thats my old man selling them on ebay makes some good coin as well. Had a search on the mini fuel issue and couldnt fine any thing. Only thing i can think of is it coming of and pouring fuel every where in a crash :rolla:. Thanks overrated ke70, it has been alot of work though. This is my first ever car iv work on and the old boy thought it would give me a good idea on panel work and other stuff, which it has. all so picking up a ke10 tomorrow. ill take some more photos this week end and post the them up Cheers Jamie Edited May 29, 2009 by canna Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted May 30, 2009 Report Share Posted May 30, 2009 Ok I'll cut a long story short for you...... yeah you've sorta worked it out anyway. Because the fuel filler sits out an inch or so on the corner, if you rolled a mini it would easily shear the fuel filler and/or cap of it making fuel go everywhere. It's not a major issue for yours but maybe if your dad makes some more he could try and get them flush mounted with the body. They'd look a bit better like that too. :rolla: Quote Link to comment Share on other sites More sharing options...
canna Posted May 30, 2009 Author Report Share Posted May 30, 2009 Roll a mini :rolla:. But thanks for the advice. Yeah we are working on one that fits flush with body and locks. Will keep you up dated on that though. Cheer Jamie Quote Link to comment Share on other sites More sharing options...
canna Posted May 31, 2009 Author Report Share Posted May 31, 2009 Hello. I have some more photos of the seat and the start of the boot audio install Before any one says any thing about the number plates they are not real. There just old nice and comfty seats. Quote Link to comment Share on other sites More sharing options...
canna Posted July 26, 2009 Author Report Share Posted July 26, 2009 (edited) Gday every one, Well my ke30 is now on the road. Took a little longer due to injury but got there in the end Here is some some photos Motor and gear box is out of a ke70. Has a 32/36 weber jetted down for the 4k with custom air filter set up seat are out of a suzki swift Full boot install just not finished yet just need one more sub and a amp to run it all heres a pic of my ke30 basher. i got bogged last week end Edited July 26, 2009 by canna Quote Link to comment Share on other sites More sharing options...
JiP Posted July 27, 2009 Report Share Posted July 27, 2009 Holy shit man. This thing has come pretty far in a short amount of time. Great work buddy :) Quote Link to comment Share on other sites More sharing options...
Ben-89 Posted July 28, 2009 Report Share Posted July 28, 2009 That car looks great, the hard work has paid off. It really has that old school flavour on the exterior while inside its more current. Top job!. Quote Link to comment Share on other sites More sharing options...
muzke30 Posted August 2, 2009 Report Share Posted August 2, 2009 on of the most fun threads i read in a while great to see u doing alot of work on your made it look awsome seats are sexy as make the ke30 look all sporty. great shot of the trasher boged Quote Link to comment Share on other sites More sharing options...
canna Posted August 2, 2009 Author Report Share Posted August 2, 2009 (edited) Hey thanks guys. Has been a lot of work. But its not perfect Still some more to finish off. Just fix the rear wheel cylinders as they were leaking and had to double pump the breaks to stop. Those seat arnt bad better then the stock ones i think. Haha yeah thats was a great day in the pig. slip and slide every where :wink: some more photos here what will be going in here her soon 5k with sc14 bolted to it. Cheers Jamie Edited May 17, 2010 by canna Quote Link to comment Share on other sites More sharing options...
greenmac80 Posted May 6, 2010 Report Share Posted May 6, 2010 great work man i can't believe i've never seen this thread!! Quote Link to comment Share on other sites More sharing options...
canna Posted May 17, 2010 Author Report Share Posted May 17, 2010 great work man i can't believe i've never seen this thread!! Cheers dude. Month after i had it finished while parked in a car park some one hit me. Came out of the shops and the guard and door was all smashed up. No note was left and wouldn’t have a clue who did it. Still haven’t fixed it my car, kind of lost interest in it and cars after that, But now have got the bug back hard and now want to finish off my supercharged motor Will be 5k standard (until it blows) with a sc14 supercharger running a 32/36 Webber but this might be a bit small. Will jet to suit. Sorry about the shitty photos So started to make the intake for the carby Just 5mm plate and 2inch pipe The mill came in handy for this Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.