April 29, 201016 yr Author comment_433476 did you have to trim some gaskets? i had to cut a small bit of the throttle body gasket but it was only one corner to make it neat :) Report
June 13, 201016 yr Author comment_444368 Not much has been happening latly..just been doing bits and pieces on the paint/rust. I did however get these from Mr SLO 030 :y: Random photo lol Cheers :P Report
January 17, 201115 yr Author comment_496016 Been so long since I updated so as it stands at the moment it has new Goss fuel pump King springs lowered Monroe GT gas shocks (fronts) new Front end bush kit Brand new stock carb the front calipers had a seal kit put through them and cleaned new front pads new brake lines new brake rotors new headlights with a semi sealed beam and just some h4 globes, within the next week i will be rebuilding the headlight loom with relays etc to make them brighter and lastly new crome number plate lights I think thats it for the moment. In a few weeks i will start sanding it and hopfully respray it Cheers Josh Report
January 17, 201115 yr comment_496223 Venetians and SLAM! :yes: Looks good mate. :y: Josh :cool: Report
January 17, 201115 yr comment_496237 I like what you have done, nice clean and simple. I applaud your efforts in rebuilding that carby. I had twin aisan carby's and the rebuild kits. I said "f@$k that" after looking at the diagram and sold them haha Report
January 17, 201115 yr comment_496248 Venetians and SLAM! :yes: Looks good mate. :y: Josh :cool: hell yea totally agree here... Mine is getting picke up today after being slammed =] and I have venetions, they really do set it off nicely Also I am loving those wheels!! Report
March 26, 201115 yr Author comment_512755 since last update have been very busy, unfortunately not alot of it was with rolla but I have done a bit. I put Monroe GT gas shocks in the rear so gas shocks front and back big improvement. I put in an electric dizzy from kemotorsport also i 3/4 exhaust from extractors back, extractors have been flanged with a tri-chamber muffler and a 2" crome dumpy tip. sounds sexy ^_^ I got bridge-stone turanza AR10's yesterday so good so far rear breaks will be my next focus as there isn't much left of them lol cheers Report
March 27, 201115 yr comment_512876 Car looks great dude, must not be too far away from being on the road?? Report
March 27, 201115 yr Author comment_513053 Thanks guys. Yeah Chris its close to been on the road for good. Can't wait :P Report
October 16, 201114 yr Author comment_560721 Recently been spending lots of time and money on this car since last update new masercylinder and rear brake shoes and rear cylinders the stock carb was jetted and tuned by the guys at Adelaide carb service :y: top job have replaced inner and outer tie rods pitman arm idler arm put a 620cca battery in her with a HEC716 bosch coil to drive the elec dizzy 2x 10" subbies in custom box 6x9 on parcel shelf 6.5's in doors jvc headunit and a 4 channel 600watt amp to power this badboy also just rebuilt my 4k specs as followed head work-full rebuild new valves, guides, shaved block was dipped, honed, faced. It now reps 0.30" oversize pistons with ACL rings all parts were pulled down, measured, sand blasted and put back together with all new parts cam regrind, crank regrind, rebuilt oil pump, double row timing chains, re fabed welsh plugs, new clutch,machined flywheel, new bearings throughout the entire engine thermostat was also replaced with an aftermarket radiator. still running the 4 speed for now but soon to be 5. will post some pics over the next few days of the engine build and the car as it stands now :cool: atm drivin her everyday and lovin it cheers Josh Edited October 16, 201114 yr by -=KE30=- Report
October 16, 201114 yr Author comment_560742 big ass fire ball came out the exhaust.. timing way out lol Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now