Want to change the center in my ke70 as the on thats is has been welded,,iv pulled the cover off and taken all the bolts out og the gear and welded center and thats as far as i got as i can't pull it out can some 1 tell me how?? what i need to do or even pic's ? want it done asap as its sitting there with the arse of the car in ther air and don't want it sitting like that over night..

Edited July 18, 201016 yr by hectic20s

pull both the whheels off and pull the axles out....

both wheels are off how do i pull the axles out?

both wheels are off how do i pull the axles out?

UNDO THE 4 RETAINING BOLTS THAT HOLD THEM IN ON THE BACKING PLATES

 

here...

 

:)

both wheels are off how do i pull the axles out?

 

 

undo the nuts holding the axel in place ,get a slide hammer and attach it to the axel stud and pull.... some times there stuck or stuborn,

if you don't have a slide hammer could try a chain attached to a car ,to give it a yank ,bit dodgy, id try the slide hammer option first,

the 4 nuts that are behind that,, i can't get the wheels nut plait off to get to the 4 bolts and i don't have a sliding hammer

2 crowbars used in a scissor action "usually" works;)

ok I'm going to go try ill be back

Oh sh#t !!!!!!!!

i can't get the wheels nut plait off to get to the 4 bolts

 

YOU PUT A SOCKET IN THROUGH THE "BIG" HOLE IN THE END OF THE AXLE AND

HOLD THE NUT THE OTHER SIDE THEN UNDO !!!!!!!!!

 

TURN THE AXLE TO THE NEXT BOLT AND REPEAT 3 MORE TIMES !!!!

 

Oh God - this could be a disaster if I re-read it correctly... :)

Oh sh#t !!!!!!!!

 

 

YOU PUT A SOCKET IN THROUGH THE "BIG" HOLE IN THE END OF THE AXLE AND

HOLD THE NUT THE OTHER SIDE THEN UNDO !!!!!!!!!

 

TURN THE AXLE TO THE NEXT BOLT AND REPEAT 3 MORE TIMES !!!!

 

Oh God - this could be a disaster if I re-read it correctly... :D

 

 

just relised that i was having a full blond moment haha cheers for the help guys :)

Edited July 18, 201016 yr by hectic20s

Thnk fluck u didnt hurt urself !!!!!!!!!!!!! :)

haha this cracks me up.

 

the thing the wheel studs are on,, is the axel,

 

haha yes the big hole is to access the 4 bolts :)

lol lucky you dident see what the car is sitting on then lol seam pretty stable tho ha ha

 

cheers agen

Lets hope the scissor action doesnt reult in 2 crowbars to the NADS ! :)

Oh no....

 

I can sorta hear the unnnhhhh... unnnhhhh... uuunnnhhh.... "momeee help" about now from here :)

 

Then the weeee waaaa weee waaa of the Ambo ! :D