DDeano Posted July 25, 2010 Report Posted July 25, 2010 Problem 1 Ok just wondered if this is normal, on the drivvers side there is a big gap between the body and the bumper while on the other side its sitting against the body. Just wanted to know why this is and if i can fix it, is the bumper bent somehow even though it doesnt look bent or is it to do with the mounts... Please help, see pictures below! My main concern is that when i put em on my ke55 thats been freshly resprayed it may damage the paint on the passenger side... Problem 2 When removing my rear bumper on my KE30 i undid all the bolts underneath but the bumper wouldnt budge then i noticed these bolts on the side and i have no idea how to get to them, any ideas? I tried gettin onto it from underneath but theres not enough room between the body and the bumper to get any tools in there... Please help, see pics below! These bolts... Thanks... Quote
twinspinna Posted July 25, 2010 Report Posted July 25, 2010 looks like the mounts need to have a little shunt back the other way mate. Quote
ke30 driver Posted July 25, 2010 Report Posted July 25, 2010 for problem 1. losen the 12mm nuts on the inside of bumper bracket and adjust accordingly problem 2 open the boot 3 bolts down the bottom 1 for braket 2 for rubber piece of crap Quote
jono1986 Posted July 25, 2010 Report Posted July 25, 2010 If one side of the front bumper is closer than the other that means the brackets are bent, are the brackets 90 degrees to the bumper? Quote
SLO-030 Posted July 25, 2010 Report Posted July 25, 2010 The bolts in the rear bumper are in the boot, under the vinyl/fibre sound deadening. 10mm socket or spanner will take care of them :yes: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.