Hey guys

How would these rims fit onto ae92

 

15x6.5 inch with +35 offset, 4x100 PCD, 73mm hub bore

Test fit them on the car!!!! Either that or get a tape measure!!

there is some good info here

 

http://www.twincam.org/topic/31639-wheel-offset/page__st__30

 

in regards to offset and width.

 

dunno about the centre bore though.

Hey guys

How would these rims fit onto ae92

 

15x6.5 inch with +35 offset, 4x100 PCD, 73mm hub bore

 

considering the standard size and offset for ae9x alloys are 14x5.5 +38 you rims in question will fill the guards nicely, i would look into rolling the inner lip of the guards to eliminate any potential scrubbing issues. as for the center bore i would be buying hub centric rings for the wheels at the same time since ae9X's are a 54mm bore.

 

now i was looking at a similar size for my ae93 seca, but i ended up with a set of 15x7 inch +25(no its not a typo) offset is a little extreme, but i wanted to fill the guards and get a flush kind of look, and i wont be stretching tyres either

Cheers, thats helpful for me too. I'm going thru the same thing