Griffo55 Posted April 18, 2013 Report Posted April 18, 2013 Any ideas about were i should start to look? Trying to get my fuel gauge to work again on my ke55 Cheers B. Quote
Banjo Posted April 18, 2013 Report Posted April 18, 2013 Hi Brendon, Common fault with the olde KEs. The usual cause is the tiny 8-9V voltage regulator on the rear of the dash printed circuit board behind the guages, or the "sender unit" in the tank itself. Very rarely is the cause the guage itself. I assume you have checked all the fuses first. I'll see if I can't dig out the circuit for you. Cheers Banjo Quote
parrot Posted April 19, 2013 Report Posted April 19, 2013 Pull the sender out and check it with a multimeter. Resistance (ohms) should vary as the arm goes up and down. If that's good then work your way forward to the gauge as above. Sometimes the sender floats get holed and fill up with fuel. Quote
CorollaNut68 Posted April 19, 2013 Report Posted April 19, 2013 First place I look is to make sure the wire hasn't pulled loose...then all that other stuff they're tellin you..;) Quote
Griffo55 Posted May 12, 2013 Author Report Posted May 12, 2013 yeh cheers guys for the helpmite have to take you up with some parts as well if its no trouble. turns out my speedo is stuck at 45 but still sorta works i think and my temp gauges seams to be failing as well Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.