johnsparty09 Posted July 14, 2013 Report Share Posted July 14, 2013 Anybody have any tips on putting a 2tg into a ke20?. I'm about to start the conversion but not a hundred percent sure what would this entail and if the engine and t50 gearbox will bolt straight in. Quote Link to comment Share on other sites More sharing options...
parrot Posted July 14, 2013 Report Share Posted July 14, 2013 Here is something to get you started http://www.rollaclub.com/board/topic/47108-2tgeu-into-ke20/page__st__15 Quote Link to comment Share on other sites More sharing options...
modify Posted July 15, 2013 Report Share Posted July 15, 2013 It will bolt straight in with a te2# engine crossmember and engine mounts. :) Plus you will either need to find a forward selector t50 or extend you shifter hole in the driveshaft tunel closer to the hand brake to acomidate the rear selector t50. The standard ke2# gearbox crossmember is the same as te2# and bolts further back in the chassis rails so no mods there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.