Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. I thought I'd write this for the guys just joining and full of enthusiasm to build a fully sik drifta. Hopefully some of the members who have completed projects (and some who haven't) will add their wisdom. First- Decide on how much time you are realistically going to spend on the project, which means listing what you are going to give up to do it. We spent two nights every week and every Saturday working on the rally car when I was in South Africa for a decade, and that over-rode almost anything else. Without that sort of discipline it will be too easy to give up when you hit a hard part. Then- make a list of what you want the car to do. Drifting, track-work, …

      • Like
      • Upvote
    • 25 replies
    • 168.3k views
  2. Started by LittleRedSpirit,

    Engine/cooling/mounting and clutch Parts required 4age 20v engine filter socks yager motorsport front thermostat fitting modified rear cooling plate side water blockoff plate aftermarket engine computer dizzy cover AE86/71 clutch master cylinder AE71 manual pedal assembly if you have a ke70 Slave cylinder to suit the gearbox either jdm or adm 4age flywheel, 200mm or 212mm Clutch to suit, yes you can use the ae101 or ae111 clutch with 212mm flywheel rwd exhaust manifold/extractors coil and igniter, for wasted spark and custom leads or 1zzfe cop setup with inbuilt igniters AE86/AE71 engine mounts - steel and rubber sections. AE86/71 …

    • 37 replies
    • 275k views
  3. TEDDY'S NOOB GUIDE NO #0052 4AGE into RWD KE70 / AE71 / *E7* Conversion Notes Hey All. There's not a day that goes by, when someone ask's *How do i put a 4age into an *e7* ! Basically, i keep pm'ing people about it and kindly showing them where to go, but its getting a bit rediculious. So, here i present to you all the links i know off, that can help you out with your conversion. Its almost a copy from the same thing i made at rollaclub, but more things have poped up since. So, its a revised list as such. Please read it, because there is **alot** of data in there. Basically from now on, any topics *how do i install a 4age into my.. etc* will be trash…

    • 38 replies
    • 786.8k views
  4. Hey all, i put this up on ae86dc but thought i'd chuck it up here if there was any interest. I recently had some success with my 4age conversion into my ke70 in that i was able to get it made "legal" without engineering. Long story short, applied through regency, they said alright, got car inspected, and they're in the process of issuing a "certificate of exemption" for me. Not sure how many people will be interested in this, but can't hurt i guess!

    • 11 replies
    • 51.3k views
  5. Started by KE70MAN,

    hey guys, kinda don't have the money for a 4age conversion, but i was thinking about putting a turbo on the stock 4k-c motor. turbo would not be bigger than a T25g so boost wil be max of 10-15psi, but i wont have intercooler so like more around 5-7psi. has anyone done or know somebody that has done this? also i was thinking to myself, cus the intake and exhaust manifold are on the same side, the turbo would have to sit a little low. is there anyway or any brand of side draught carbies i can get so i can sit the turbo a little higher? another thing that came to my mind was that maybe the 20 yr old engine can't handle a bit of boost, like head gasket might blow? I'm n…

    • 219 replies
    • 560.1k views
  6. Hey guys, I've got a BEAMS engine on order and hopefully should arrive in a couple of months, super excited! But I just wanted to know about swapping the rear axle. I've tried messaging a few places to see if they will swap out the diff in the current one and most places have just refused to say they do axle work ( even when some of them say they specialise in fabrication and swaps) So just just wanted to know how feasible a swap will be. I've heard the ae86 axle is pretty much the exact same length and with lots of aftermarket support, that feels like the right choice for the least amount of work (I understand I'll still have some work cut out for me, but easier than get…

    • 3 replies
    • 689 views
  7. Started by Corollawagon90,

    Was wondering if anyone has done this swap. Really needing some help with the ae82 and ae92 dash wiring integration. Was thinking of maybe just swapping the whole ae92 dash harness over as well. Then wiring it into the ae82 stuff like the cluster, heater controls , heater fan, etc

  8. Started by LittleRedSpirit,

    Hello. As some people know, I've been interested for a long time in fitting a 2azfe to an ae71 or ae86. It's something I've given a lot of thought to, but now I've made some progress and would like to use this as a place to collect my thoughts/information that I learn along the way so I don't forget what I did or how I did it. So far I've collected a lot of what I should need. I have: 2azfe 2azfe clutch, flywheel, inlet, tb, loom, coils, alternator, starter, exhaust manifold/cat, and fwd transfer case. 2azfe lightweight pulley kit. 2azfe inlet manifold flange from ross machine racing. Various starters to suit rwd config. Y and S bellhousings to suit …

  9. Started by Lukey,

    Hi all I'm thinking about putting a 7k into my ke35 coupe. My coupe at the moment has a 3k-c with a ke70's 5 speed and a stock diff. My main questions are- 1) If i am going to have upgrade my gearbox and diff 2) Are there any major upgrades needed 3) And i have herd that it should bolt straight in but i may have to change the sump to a 5k sump is this true Thanks heaps Luke :hmm:

    • 55 replies
    • 30.9k views
  10. Started by nzshrek,

    I am in the process of installing a 4K-e from a starlet into a KE70 wagon and am struggling to find wiring diagrams for the efi/ecu. Any help would be very much appreciated.

  11. Started by xtianthrow,

    Hello, my name is Chris and I live in the Philippines. Over here, we have what we call owner type jeeps (OTJ) - jeep replicas with stainless steel bodies, and basically a hodgepodge of random parts - from engine, to wheel hubs, etc. I own one with a 4k-u engine and k40 tranny. I am thinking of building a new one, and what I have in mind is 4AFE - as these came on the top-spec E100 corollas locally, so parts would be plentiful. My question is, would a T50 tranny mate with a 4AFE engine? How friendly are these engines to tuning, can I expect a modern laptop to interface with the ecu easily? Going for 4AGE is not an option, because it is hard to find, and relativel…

  12. Started by AdamB,

    Hi all, Has anyone done this conversion and can shed some light onto the sump modifications required or sump to purchase to make this conversion happen.

  13. Started by Gareth112wp,

    Hi there I have this Toyota conquest 1985 model with 4af 16 valve conversion how's this engines performance with Weber carbs on

  14. Started by Ricky stanicky,

    At the moment I have a 1991 corolla with a 4afe engine in it. I want to know if I should leave it untouched or search for a 4age to put in it. As it is its pushing 103 horses, with the research I have done the 4age would do about 140 horses and I want fast. I was also wondering how hard it would be to swap an engine for someone with limited experience👍.

    • 3 replies
    • 1.5k views
  15. I just wanted to share some insight in my problemsolving when buying i Toyota Corolla KE70 Wagon 1982. When I bought the car it wouldn't start no matter what I did. So I took apart the carburetor and cleaned the main and secondary jets, as well as the crap that was in the idle nozzle and all the rest. Used cleaning spray and air. When I then mounted the carburettor it still did not want to go well, either at high or low speed. It just turned of. The next day I examined the solenoid that turns the fuel supply to the carburetor on and of, it didnt react when I put the ignitionon, and it turned out that a fuse had blown. After this I could at least drive the car, b…

    • 0 replies
    • 387 views
  16. Started by dasher,

    Hi everyone. Sorry if this topic has been discussed before, I'm new to 4AGE's. I have fitted a 4age smallport with turbo to a Datsun 1200( previously a rotary). It has a bigport ECU. My issue is I have had it running with COPS, only on 2 cyls. I have now gone to a Daewoo twin coil pack and all plugs are firing. But I cannot get it to start, even using a starter spray. Has anyone used these ECU's with the Razorback piggyback controller? I have searched for a contact info of the guy who made these controllers, but no luck. I would be grateful for any info that may help with this. Thanks in advance. Ps, I love Toyota engines, this is not the 1st Toy …

    • 2 replies
    • 518 views
  17. Started by YUNO 2,

    Hey guys n girls, I’m pretty new to this type of stuff so sorry in advance to all if I muck up. I’m building a 7afe turbo 4 my 112 & forged pistons are near impossible to find, anyone out in Rolla land know of any in oz ? I have found some in China but you have to buy 7 sets 4 $2,500(approx). Ok they work out for $400 a set but wtf am I gonna do with 7 sets? I’ve got Spool rods, balanced the crank, new bearings, seals,….etc. I’m pushing almost 20 psi into a fresh one built in January this year (2024) with 40thou over hypatec pistons, again new seals etc… siruda head gasket (stopper) & holy hell what a lot of fun 😝. I’ve blown 2 motors in 2 years (bending rods in 1…

    • 3 replies
    • 923 views
  18. Started by RT Rookie,

    Hello, I I have a 1972 Corona RT85 and the 18r engine is dead. What would be a good swap for the car that can be done by a noob. lol. I’ve seen some have upgraded to a 22r but I would like to go with something less heavy and the I can find parts for easily. Any guidance and guides would be great. Thanks

    • 4 replies
    • 980 views
  19. Started by ghettochild LG,

    Hi I am new to this site I have been looking for a 3kr engine for a little while and I found only one place to get one, the person who has it is thinking of sending the 3kr cylinder head to be reproduced so I was wondering if there would be 100 people who would be interested in a reproduction of a 3kr head and internals I need to find out about pricing but the person said just for the casting of the head wouldn't cost too much but reproduction of cams pulleys and so on will be needed. I will try and research where to get 3kr internal parts built let me know if anyone is interested, I will get back to the person and ask if the quote's been recieved for casting them …

      • Upvote
    • 51 replies
    • 98.5k views
  20. Started by Z4N3_26,

    Hey guys, I was wondering where I could find a 4af engine to buy, I've had a little look and I can't seem to find any. I would like to put it in my 1988 ae82 and drop it in place of the 4ac that is in there. Cheers in advance any info is much appreciated

    • 3 replies
    • 717 views
  21. Started by HaqimShah,

    Hello everyone, I'm new here. Recently i just swapped my 3K-H to a 4K-C engine with oversized piston, 5K carbs, 5K starters, 5K distributors. Engine was fully rebuilt by a mechanic whom i paid to do those job. It has been a month ever since i swapped the engine but i still can't drive the car due to the constant jerking when moving. Sometimes the engine died whenever i change gears. Really in need of help since ive been putting so much time and money to get this car fixed!

  22. Started by GT3LovR,

    I know this topic has been beaten to death in this forum, but answers have been hard to find with a forum this vast. Please help me answer some questions! 1. Do I need to run a standalone ECU, or should I? I have a fully built 16v 4AGE that I'm going to drop into the KE20. I'm expecting at least 180whp out of this motor with ITBs. What standalone should I run? 2. What diff and trans combo should I run? I want to have an LSD in this car because of the power. Do I need a new tailshaft? What is required for to install an LSD compatible with a 5 or 6 speed trans that I'd mate to this 4AGE? What are my options? 3. Do I need to cut holes into the trans tunnel to …

    • 15 replies
    • 2.3k views
  23. Started by Magnelite,

    Hello! New to the forum! We just recently bought a KE30, the P.O swapped it with a 3TC, a 5 speed transmission (not sure if it is a T50 or K50 trans), and an all disc brake. Here is the pic of the car: Upon inspecting the car, I noticed that the front part of the engine (near the rad), is raised up a little bit, I read in some forums that you will be needing the 2TC mounts for it. My question would be is it only the rubber mounts that you need when swapping it with a 3TC? or do you also need the 2TC metal brackets that holds the block? or I can use the 3TC metal brackets but use the 2TC rubber mounts? Here is a pic of the engine bay before we bou…

    • 3 replies
    • 1.3k views
  24. Started by 4ageless,

    hey people ... i have a ke70 with 4age fitted along with tranny and diff . this 4age is a MAP sensor one i have 20v throttle bodies a vaccum manifold and an APEXi S-AFC 10 years ago i have fitted these itb's and tried to run them with stand alone megasquirt but the project failed due to money shortage while on stock ecu , couple of days before megasquirt, car idled smooth run good . the problem was that it was too rich . i had an AFR of 12.0 mid range revs was about 13.0 and high revs about 13.5 all vaccum hoses 100% sealed , no air leaks ITB's 100% syncronized . my latest acquisition is that s-afc i got on ebay fo…

    • 3 replies
    • 2.1k views
  25. Started by Mkbitti,

    Hi All, For anyone who has done a beams conversion on a KE55 using the stock intake, what brake booster/master cylinder did you use to clear? I have tried what the wreckers told me was a Starlet EP91 booster but the overall diameter was too large and fouled on the inner guards. Would also be interested in any pics of completed conversions. Thanks, Matt

  26. Started by oliegat,

    Has anyone put a beams into a rt104 corona and if so, how did it go and what mods needs to be done? Otherwise what would be a good engine swap for a rt104 corona if not the beams.

    • 2 replies
    • 578 views
  27. Started by Ahmed Suhail,

    Dear All, I recently swap 3S-FE in my KE-70 station wagon with auto transmission, but the mechanic who installed the transmission doesn't match with engine and the transmission number or name is "unknown". please guide which auto transmission is compatible with 3S-FE. thanks & Regards,

  28. Started by MaximusPsychosis,

    So, it begins...

  29. Started by Kike,

    I need mounts to do this swap who has them already made an want to sell it

    • 0 replies
    • 561 views
  30. Hi guys, Looking for some advice on how to connect an AE86 fuel pump to the hard lines in my AE71? I purchased a stock fuel AE86 fuel pump and can't work out what adapters/fittings I need to connect the sender hard line at the back of the car. I've just purchased a Raceworks Female An-8 To Barb 3/8In... I was then planning on using an adapter to get the hose down the hard line size... I'm not confident this is the best approach though. What have you guys done in the past?

  31. Started by HasithaR,

    The 7K-e engine is installed tilted. Due to this the oil drain plug is not at the lowest point in the sump. This makes it difficult to drain all the oil in the sump unless I ramp the left side front wheel by great deal. Is this normal to have the drain plug not at the lowest point in the sump? is this a design failure? Appreciate if someone can help me to understand. Thanks.

    • 2 replies
    • 1.1k views
  32. Started by Corona4age,

    Hello guys , I have an 1976 toyota corona with 4age bluetop engine. The engine has been setup from the previous owner with charcoal canister deleted. Now I can smell fume every now and then when driving the car. I think the fuel line setup currently is incorrect in terms of venting fuel vapor. But I don't wanna do a lot of modification, so I have come up with an idea with less modification, using most of the existing parts. Could you please help me verify if my idea shown in the diagram is OK to go for? Existing setup: A T-way fitting is used, in between the filler overflown line, as a return line from the engine. …

    • 2 replies
    • 1.4k views
  33. Started by Pete-ke20,

    This is a rough guide to my project so far! Ok, so I wanted to do something different, and I have always wanted to have a gsr lancer or vr4 galant as they are fairly quick but having not much cash and wanting to work on the car myself I decided to put a 4g93t engine like that out of the gsr lancer into my ke20. I also chose to do this as it appeared to be just as much F*#king about to do the 4age conversion and that the 4age would be more expensive due to every man and his dog doing it and only soo many parts about. The engine is a 1.8 litre DOHC 16v engine, which is a Japanese block (very important when it come to bell housing and box selection). I used this engi…

    • 59 replies
    • 130.4k views
  34. Started by Juic3,

    I'm going to start my build soon which is going to have an ls 6.0 turbo. I cannot really find parts. I was looking for a weld in tabular front end also and after market k member I will drive the car alot once it's complete and also take it to the drag strip anyone can help me. I will have a 8:8 or fab 9inch rear-end roll cage just want it done right and I no the old suspension I will also try and go with some type of rack set up for my steering any information will help thank you you have no idea how this will help me

    • 0 replies
    • 751 views
  35. Started by LucaKE,

    Hey everyone! As the title suggests, I am looking to engine swap my current 4k K40 in my ke38 with a 4age T50. I have gone back and forth with myself if I should just build a hot 4k, or go 4age, but I have come to the conclusion that only a 4age is the only solution that will make me happy with the build. That being said, I am looking to find some either ke55/ke38 4a swap builds that give, in detail, the parts required to undertake this swap (could not find any on here). Or alternately, if anyone has a big list of the things needed and recommended. Money really isn't a problem here, as I want to do this right. Thank you legends! Luca P.S. Pi…

  36. Started by Jansku99,

    Hello. As background information, I live in Finland so all cars is question are European Spec. I'm thinking of upgrading my 4A-FE (from 1993 Carina E, same as the one from Corolla AE100, with Denso distributor) with bottom end from 1998 Avensis AT221. Basicly making Celica AT200 7A-FE engine on tight budget. Carina E 7A-FE would also be available, but they are Lean Burn engines so they have different heads as they have flaps in intake. I don't know if old style intake would even fit and is the head flowing as good as older one? Can 4A-FE ECU control increased capacity correctly or do I have to find AT200 Celica ECU? Are injectors with same resistance and do…

    • 0 replies
    • 2.2k views
  37. Started by LucaKE,

    Hi there, New to messing around with corolla boxes. I own a 79 ke38 with a K40 and I am looking for a box with a 5th gear. I've heard T50 boxes are the way to go, but a hydro conversion is needed. I don't plan on putting in a 4AGE or SR or anything, but some simple K power mods in which I heard that the K50 box is better for. Which box is better for my needs and what is the process of installing it? Do i need any extras? Does anything need to be shortened etc etc. Cheers, Luca

  38. Started by davek_14,

    Hi all, I am currently installing a 7K carby engine in the ke30. Just wanted to share my thoughts on the progress so far as it might help others. Got a 7K engine from melbourne and we have rebuilt it completely including a new flywheel and HD clutch kit ( 4K flywheel and clutch and a spigot bearing rsb 508) Used the 4K sump to get the measurements to cut the 7K sump. Cut the sump completely just below where it mates to the block and then cut 20 mm off the sump all the way round. Rewelded sump. Used the 4K oil pump as 7K one is too long in the modified sump. Did a trial install in the engine bay and it fits perfectly using the original engine mounts from the 7K engine…

  39. Started by Oniesho,

    Hey guys I'm pretty new here and only recently got my ke55. So for the past couple months before I got my ke55 I was trying to decide what I wanted to swap into it down the line. I'm most likely not going to swap it anytime soon probably 1-2 years after research and saving. I wanted to find a good motor and I've decided to go with a k20. I was wondering if anybody here has done it, how hard it is, what I should expect, difficulty of finding k20 parts and how much it'll roughly cost to make at least 200ish kw. Any advice can help because I can only find one video and no threads on k20s for mounts and other stuff. Loving the ke55 tho

  40. Hey everyone. I recently acquired a KE20 Corolla that's been sitting for some time. It's going to be a long project; however, I will want to engine swap it. I would love to do a 4A-GE swap, but in the US, these seem to be relatively hard to source. I do however, know of an inline 4 that I have been pondering. GM's GenII and Gen III ecotec engines are in abundance because they seem to throw them in everything that they can. Cobalts, HHRs, Saabs, Colorados, etc etc. The problem (or so I thought) was a RWD transmission. I recently found that RWD is actually possible relatively easily as the Gen II Ecotec has the same bellhousing pattern as some rwd colorados, solstice,…

    • 2 replies
    • 1.4k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.