Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. Started by RollaIVLife,

    Hey Guys, Can anyone point me in the right direction for an engine conversion in Melbourne? Cheers

    • 4 replies
    • 6.1k views
  2. Started by 79gooser,

    Hey so the trans in my Ke30 went out and I'm having issues finding a local k series. My next thought was immediately swap from the 3KC to the 3TC and us the gearbox from that, but, due to my rural location, those are hard to come by as well. So I was thinking about putting a 22r into it and using a W series trans with it. Will it work? Will it fit? Is there an adapter kit? How much fabrication will I have to do, and if so of what? Is it easy enough to be worth it? Those are all questions that immediately ran through my head, and I was wondering if I could gather some insight from someone much wiser than I. Thanks all!

    • 5 replies
    • 15.1k views
  3. Started by diegoh,

    Is anyone running a 3vz, mz or gr v6 in any front engined rwd pre 84 corollas celicas? Ive been looking at the torque of all the toy v6 engines are their weights designs etc. I will be happy with 230hp for a supercharged v6 as I'm interested in torque VZ-e 8v heads are very light, cheap new and very compact for engine space. The 3vz-e heads on a 3mzfe bottom end all head bolts line up and all water galleries more or less match up, oil feed is spot on and oil drain is easy. VZ-e e heads just need little opening up on water galleries after looking at the gaskets its all very possible. Some oil drain holes on MZ need sealing etc. Might seem a brain fart in a…

    • 4 replies
    • 11.7k views
  4. Started by Leeroy,

    Has anyone done or heard of this conversion? Engine comes in RWD form from a 2wd d22 navara. Also from a bluebird (U13) but that's FWD. Is there somewhere that covers the legalities of engine conversion in QLD for road worthy purposes? Cheers

  5. Started by Brodie day,

    hi i am going to paint with my KE70 and to do a good job I'm going to take my engine to spray the bay and now I'm thinking if the motor is coming out it might be a good time to upgrade i have looked around for something that will bolt onto the blocks and trans that i already have in the car and the one that will work for me is the 7K(e) it comes out of a 2001 Toyota light ace van I'm going to buy a car that is already running on the road so i know it runs and i have all the parts i need so my question is has anyone done this before to a KE70. someonethat can tell me all the things that i need to know like all the little things i may miss and even if it is a good…

    • 2 replies
    • 13.2k views
  6. Started by gmm213,

    Before the bashing begins. Yes I have an idea of the cost. Yes I have an idea of the complexity. Yes I have researched into it. Yes I am still wanting and willing to do it (even if I don't, I am willing to have one of the local race shops finish, and yes I have that figured into budget as well). No I don't want to use a different engine to make it easier (I'm not sure about a GTE or GE yet though). I want a 2JZ, even if it is for the sake of having a 2JZ, and I love the look of the older Corollas My question is this. Is there a benefit of using an AE86 coupe over a KE70 coupe for the swap or vice versa? Engine compartment size, weight distribution, etc etc. I am…

      • Upvote
    • 8 replies
    • 12.4k views
  7. Started by akilaf94,

    hey guys, I'm from melbourne, so ive had my ke55 for about a year now, ive been doing a bit of research on converting my stock 4k to a 4age and making it manual, i have no idea where to start, its currently on club rego in VIC. i know ill have to get in engineered, can someone give me a few tips ? maybe like a check list of things ill have to do and in which order to do them ? i haven't purchased a motor or anything yet, i want to figure out how much i would need to spend and get all the details first,

  8. Started by Corolla78ke30,

    How i now which type of 3k engines i have?

    • 2 replies
    • 11.2k views
  9. Started by MarginallySane,

    Hi, total noob here so if this is in the wrong section please do tell me! Anyway long story short, I was looking for a project car to have a go at fixing up and had almost made up my mind on a RX7 that I saw on gumtree. My dad found an add on gumtree for a KE55 rolling shell in what looks like fantastic condition for an insane price, so on impulse I'm heading down tomorrow to pick it up. I'm pretty sure it was factory auto but there's no motor or box. Ok now for the reason this in in here, A long time ago my elder brother was into corollas and had a AE86, he brought and planned to do an engine swap with an imported 16V 4AGE (Blue top I think), however about a mont…

  10. Started by Oobzie,

    Soooo, I'm buying a ke70 soon and I plan on putting a 3sgte in it. Is this a difficult swap and how much will it cost me in parts that aren't the engine itself?

    • 2 replies
    • 15.2k views
  11. Started by 1975 KE30,

    Hey guys I was looking to see if anyone has done a 12a swap in a ke30 If so -how difficult -the hardest part -what gearbox, tail shaft, diff and front end -rough cost -what modifications needed to be done Thanks

    • 7 replies
    • 12.3k views
  12. Started by KE25 Punk,

    Anyone here knows anything about FE head came shaft sizes on the A block heads? I'm wanted to find some bigger cams for my 7AFE. Maybe even aftermarket or regrind.

  13. Started by Souli,

    Hi Guys, New member so forgive any rookie mistakes. finally getting started on converting my 75' KE30 into a jap spec S15 6SPD MANUAL SR20 turbo. i know this gets asked alot although i will ask again. i need a few tips on what diff to get and at what ratio best suits an everyday driver. keep hearing hilux hilux etc, although i am open to other alternatives. also with brakes- what would best suit a project like this. i am lucky to have access to an uncles mechanic where we will be doin the job ourselves. but jus curious to see what would be my best option in regards to the above mentioned. although its not super cheap doing this sort of conversio…

      • Upvote
    • 39 replies
    • 70.8k views
  14. Started by harryrolla,

    hey all i have brought a 4age and it didnt come with a map sensor or air flow meter. so i need to know which one i need to buy. its a AE82 Corolla 4AGE - (Largeport / TVIS / MAP / Yellow Plugs) ecu numbers are toyota 89661-12080 175700-0561

  15. Hi All, I have recently purchased a Ke35 and will be getting my P's (Australian licence for 17 year olds) and am looking to put a 4age in. I have seen people posting about putting a 4age into Ke70's and Ke55's with an AE71 conversion as well. I am just wondering as I am quite new to the world of Corolla's if it is an easy conversion to put a 4age in my 35 and what I will need to do to make it possible. Wanting to make this thing as unique as possible. Thanks all.

      • Upvote
    • 4 replies
    • 20.7k views
  16. Started by warbuilt,

    we have been dropped off a KE 10 for rust /panel /paint and rotary conversion . we have gone to fit the rotary but there is not enough room to the suspension crossmember to get the engine low enough to clear tunnel . we have cut out a bit of firewall and tunnel but even so , the gearbox needs to come up so far that we have to cut out floor cross brace etc. it would make more sense if we could buy or modify suspension cross member . has any one done this conversion ?

    • 0 replies
    • 20.3k views
  17. Started by altezzaclub,

    Ok, I'll write up what I can remember so others don't spend as much time as I did.. As usual, I never thought to take photos until too late. This is on The Girls KE70, over here- http://www.rollaclub.com/board/topic/42407-the-girls-ke70/ Steve started collecting 4AGEs and KE70s the moment we decided to rally one, so as he had one in his daily and we'd had a couple of 4AGE wagons pass through our hands recently, I thought I'd find out what they were really like by building one- Cheap and simple of course! Starting with the fuel system- I bought the pumps and mounts (and lines) from a VL Commy at the wreckers, found out the pumps were duds and bought new one…

  18. Started by tdg61,

    Here's my project. It has been on the back burner for a while, but is now picking up pace. This started as a granny spec ke20, that I bought about 9 years ago. The original plan was to turbo the fiat engine I got from a friend, and just run it as a street oriented car. You can see it in the attached picture. This has been taken out now, and was loaned to my friend for his 9 second Honda s600. I,ve since got it back and will use it for another project. The plan is to north-south a 3vz-fe motor from the wide bodied camry (which I've done) and with a C4 auto fit it into the 20. Diff is the trusty old nine inch with full spool. The diff that was in it, came from a 620 …

      • Upvote
    • 33 replies
    • 116k views
  19. Started by oldeskewltoy,

    I've seen quite a few threads in Rollaclub showing SR20 swaps. As I've done some porting on the SR20, and I have a new client whose SR20VE I'll begin porting next week (if all goes well on delivery to me). Between now and then I'll drop a few photos, and some flowbench results from my "play" with a highport SR20DE Not a lot of fwd heads around so "beggars"(me) couldn't be choosey. For those who know something about SR20s... this is a 2.0 liter dohc 4 cylinder - fwd "highport" 1st gen SR20DE. It uses HLAs (hydraulic lash adjusters) as part of the valvetrain Obviously the first thing to be done - was cleaning up the mess …

      • Upvote
    • 36 replies
    • 163.1k views
  20. Started by Nutta1,

    just a quick question is the 3K flywheel the same as the 4K

    • 3 replies
    • 48.8k views
  21. Started by harryrolla,

    Hey all. i have a 16v 4age, i have wired it up, have tested injector pulse with noide light, i have fuel at injectors, injectors have being cleaned and flow tested. i have spark timing is at 10 deg btdc. marks lined up on bottom and top crank pullys/cam gears. the dizzy cap has a spark that occasionally jumps across it (not sure if its from a scrape on rotor cap) i have earthed 5 earths from the ecu, so don't think its an earthing problem? tryed to run it on eather but no difference. Seems to me like the cam timing isnt correct, but all marks line up.. Any help would be great

  22. Started by Rolaspec,

    Hi guys probably been asked a thousand times, are the standard fuel lines in the ke30 large enough to run surge tank or am I better off running a new feed and using the existing as a return line? Cheers

    • 5 replies
    • 58.5k views
  23. Started by JasonKE55,

    Hi guys, need a bit of knowledge about brake masters. I'm using the standard pb r brake booster and master but when installed the pressure switch sensor and bleed nipple hit the intake mani. I've been to abs and they've said that there are no aftermarket masters which will fit a standard booster. What are you guys using?? Is a ke30 booster/master narrower? Cheers, Jason

      • Upvote
    • 3 replies
    • 58.5k views
  24. Started by Nutta1,

    Sorry if this question has been flogged to death can anyone tell me does the 7K injection manifold set up fit a 5K motor. Is there any clearance issues with the bonnet it will be installed in a KE30.Sorry once again if flogged but any help would be appreciated.

    • 3 replies
    • 103.5k views
  25. Hey fellas, wondering what you guys have used as a clutch master cylinder in an Sr conversion in ke55. It's a pretty tight space so I can't use the standard Sr clutch master as it will stick out way past the intake mani. Have heard about the ta22 but not sure dimensions and compatibility. Cheers

  26. Started by kwatro,

    Hi Guys, I am a new member. Just recently both my KE70 and loving it, can someone guide me or at least point me to the right people, I wish to turn sunshine (my daugther named her) into a one sexy rolla. My initial game plan is to swap my 4K to a different engine and install some lowering springs. Few question guys and I will apologies now for being so dumb being the new kid on the block. Engine option: 5k --- so far this is my bet 4AGE-- do I need engineers cert for this one??? I wish to stay away with SR20 and CA18, I wish to keep in within toyota family engine. Lowering springs: (been reading some few discussion) Ford AU springs Again guy…

    • 2 replies
    • 84.5k views
  27. Started by ShowUsYourTints,

    Gents, I am shortly going to be acquiring a 2000 model 3RZFE and Hilux 5 speed, that I want to put into my KE70. Now I've had a search, and it has brought up some issues with sump configuration fouling on KE70 crossmember and what not. I was wondering if anyone has any experience with this conversion? There's a few things I'd like to know in particular. - With the sump, there is a bit of info flying around that the USDM delivered Tacoma, which is essentially a Hilux, came with a slightly different sump config. How true is this? - Does anyone have any pics of a 3RZ sitting in a KE70 bay? - I'd like to leave the firewall intact. I know I won't be able to sit…

      • Upvote
    • 31 replies
    • 127.8k views
  28. Started by JasonKE55,

    Hey fellas, I'm about to install my clutch master in the KE55. I purchased an S13 clutch master and going to be mounting to standard ke55 manual pedal. Does anybody know the best way of measuring and positioning or has anybody done this before and have a drill template?? Cheers

    • 3 replies
    • 90.3k views
  29. Started by Aowski,

    Hello, everyone, hope you're having a good day. I'm new, tried to search this question but couldn't find anything. I'm not a native english speaker so that might be an obstacle. I own '79 KE30 with 1.3 4k engine, she overheated and blown a crack on the head, it's clearly visible, so that's not good. Can i fit forklift head to a car engine? If not, why? There is almost no data on the topic in my language, and i'm in desperate need of someone who can help with knowledge. Thanks.

      • Upvote
    • 4 replies
    • 115.7k views
  30. Started by Nutta1,

    Has anyone considered a 22re conversion into a ke30. Is this legal qld. Don't really want to go down the path of a 4age but still want to remain Toyota brand.

      • Upvote
    • 4 replies
    • 119.8k views
  31. Started by es22,

    Hey guys, Just wondering if someone with a trained eye could take a look at this and let me know if it looks like a bigport or smallport? Apparently it's a smallport but it was out of an AE92 levin which I thought were only bigports? http://www.gumtree.com.au/s-ad/kings-park/engine-engine-parts-transmission/4agze-corolla-supercharged-engine-conversion-16v-4age-ae92-ae101/1097589439 Thanks

    • 5 replies
    • 161.5k views
  32. Started by sammyeags,

    Brought a ke30 with a 5k. its got single webbers carb and extractors + Exhaust system. other then that i assume its stock just wondering what rpm i could safely run it to. 5500,6000? cheers :)

  33. Started by drift freak,

    Hi guys, Thought it was about time I started a thread detailing my build project. I bought the car back at the start of the year off e-bay. I bought it without inspecting it so was pretty happy to find it in reasonable condition. So i got it home and started with my research as to what i could fit in the engine bay. I originally thought i'd go with a 4agte but after some research found the 4a road had been travelled many times over. So I've got a mate that had just bought a KE20 to make into a race car and he was talking about these 'mythical' Altezza beams engines...... HMMMMM my ears pricked up with the 210hp stock 6 speed manual. So off to the importers to pick up a f…

      • Like
      • Downvote
      • Upvote
    • 373 replies
    • 777.7k views
  34. Hey fellas, Another question about me old conversion. Trying to figure out the best way to run a clutch cable to my sr trans. Would you guys suggest buying standard clutch cable and modifying or any other ideas from the guys who have done it before?? Cheers

  35. Started by JasonKE55,

    Hey guys, I'm in the middle doing an Sr conversion into my ke55 and I'm trying to figure out what's best for fuel system. Whether to use inline or in tank fuel pump. Which one you guys recommend. Also what size fuel line for feed and return. Cheers

    • 10 replies
    • 245k views
  36. Started by JasonKE55,

    Hi Fellas, I've been trying to figure out which radiator will fit in my KE55 with Sr20de. Measurements for s13 radiator if i set it hard up against the front would be too high for bonnet to close. Are there any alternatives with correct inlet/outlet orientation that will fit or should i try and fit the s13 radiator further back off the rail and put thermos on front?? What have you guys done. Cheers

    • 11 replies
    • 247k views
  37. Started by capt. crunch,

    I have basically straight swapped a 4age big port from my ae71 which was damaged into a ke70, both were 1984 slant fronts. Basically when I did the swap i put bits of tape with labels on each part i disconnected so that I could just plug it all straight back in. I did this and now the engine is in, when i turn it on and try turning it over it is pumping fuel but not turning over. I did notice this wire, which has been stripped but has nothing on it, I am wondering if it might have had a terminal on that should plug in somewhere or not? it is plain black and it leads towards the ECU's side of the loom, the stripped end is located near the plug which connects to the …

      • Upvote
    • 4 replies
    • 27.2k views
  38. Started by onnpsi,

    hey guys I'm new here just thort i would post my new car thats underway its a 1974ke20 that I'm fitting my rb30t too it was in my old vlturbo onnpsi ok list to motor fresh rb30 rajab spec head cam and cam gear rajab plenam to4z on new steampipe manifold was low mounted in vl 44mm wastegate 770cc injectors in vl now 1600cc for e85 2x 044 pumps and surge tank microtech lt10 big frontmount and keas full manual jatco with transbreak all this made 305rwks on 22psi on pump 98 in vlturbo but in the ke20 ill be running e85 and more boost ill get pics up soon when motor goes in and this car will be wearing my plates onnpsi here is a pic of motor …

      • Upvote
    • 229 replies
    • 326.1k views
  39. Started by novaluke,

    Does any one know were i can buy a kit for a solex 50mm cable kit? Thanks

    • 2 replies
    • 208.3k views
  40. Hey guys hows it going . So I’ve had my 20 for a while now with a cammed 5k and its been a winner. But ive always wanted to do the 4age turbo build and after researching for like a good year I’m finally taking a dig at it. I am going to try and do as much work as I can myself on the car. I'm a qualified engine builder/machinist by trade so the motor itself won’t be an issue. Wiring the car shall be a task for me. But I’m happy to get in and give it ago :) Like I said before ive done a fair amount of research but there is a lot I don't no so any info or suggestions is much apprecia…

      • Upvote
    • 11 replies
    • 434.7k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.