Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
hi people I'm new to this site i have a 1983 toyota corona st141 I'm putting a rb30 in it and would like to no if the crossmember out of a ca20 would bolt down the same as the st141 on the chassis rail if anyone can help me id really appriciate it thanks
-
- 2 replies
- 5.2k views
-
-
I have searched the threads and can't find anything on this so I I have a ke70 with sr20 and s15 gearbox and I was wondering what master cylinder and slave people are using?
-
- 3 replies
- 9.1k views
-
-
Hey guys i picked my self up a ae71 rolla for $900 bucks a while ago, i was in the process of fixing it up then came across a bloke at work wanting to get rid of a AE93 rolla with a 20v silvertop that he got from a half cut. I plan on doing the conversion i just don't know when as i don't have the money at the moment for all the RWD conversion parts and labour for auto sparky to wire it up.. plus id already bought a new weber for the old 4AC before i scored this. question is i have pulled the motor, ecu, harness, fuse boxes, intake piping etc....what else should i save from the ae93 ?? would the fuel pump setup work for the conversion ? or should i just do VL inli…
-
- 3 replies
- 8.8k views
-
-
bought myself a ke70, and planning on having it powered by an sr20. i will be buying a 180sx front cut with gear box for the conversion. My question is wether to stick with the original corolla cross member or swap it out with the 180sx crossmember as lloyd smith has done with his ae71 rolla? what would be an easier conversion??
-
- 5 replies
- 13k views
-
-
hi i bought a ke55 4door 8months ago I'm looking for info to put a SR20vet with RB25det 5speed and a VN or R31 diff and a s14 dash cluster!
-
-
- 10 replies
- 15.3k views
-
-
hello,this is my first post,I just want to ask the gurus here if I can transplant a BT on KE25 without ripping the fire wall?thanks in advance... :-)
-
- 9 replies
- 10.9k views
-
-
Hi all, lurker, now poster... Looks like I'll be getting my grandmother's auto ke70 that I've been lusting after for a while complete with oily 4k. I'll just be driving it for a while but I am thinking of doing some sort of conversion down the track when time and $$$ allow. Done a fair bit of reading here and I'm curious about real $$$$ when it comes to conversions. Not just the motor, but also driveline, brakes, engineer's plate (the bits they don't tell you about). Not, "I've got 15 corollas in my shed so it cost me $5", but real money. Coz I I'm a tightwad and really want to know. So here's my question... How much does it really cost to do; Beams swap (dream) …
-
-
- 22 replies
- 11.2k views
-
-
Well my corolla had a v6 supercharged engine with different diff and auto gear box, Now thinking about putting a RB 30 into it just wondering if anyone has done it and what mods you have to do. like best diff?? gearbox to fit onto the rb 30 if R31 struts and brakes would go straight in ?? if anyone has a RB30 55 crossmember?? any info you have would be much appreciated. cheers WebRepcurrentVotenoRatingnoWeight
-
- 8 replies
- 16.5k views
-
-
Alright well I have an 82 corolla coupe and I plan on doing a 1uz swap soon. I'm wanting to swap the ae86 gts front end suspension stuff along with the steering rack and crossmember etc. I was wondering if anyone has done this and also if anyone has swapped rear ends what rear end they used. I have seen the ae86 gts rear end, supra, and even some ford rear end swaps and would like to know what it would take for each rear end to work on my car. If any just bolt right up or what would have to be modded to work. When finished it will be a full track (drift) car that might see some street use but not much at all. I am located in the U.S. by the way.
-
- 8 replies
- 19.9k views
-
-
Anyone selling a good 4k or know where I can buy one from? Looked everywhere can't find one. Or know of another good motor to put in my ke55 that I can have on my p's
-
- 3 replies
- 4.2k views
-
-
started work on my e20 in december. sourced an engine made modifications to the k40 box, k fly wheel and made engine brackets to suit the conversion
-
-
- 11 replies
- 14.5k views
-
-
hey guys i have a 20v blacktop in my wagon atm... its fun but not fun enough i want more effortless power so i have decided on a 1mz due to its design for a east west engine ang its high ratings just wondering if anyone has tried to put this engine into anything like this and if so waht sort of problems you have encountered would be really interested to know if anyone has done this exact swap to see if I'm the first one as well :P some things i have found so far are -the engine block has to be mod to mount starter motor on other side, -intake manifold or bonnet has to be changed to actually fit under a corolla bonnet -if the engine actually bolts up to the 4wd…
-
- 15 replies
- 128.7k views
- 1 follower
-
-
All Whats the easiest most legal way to set up the fuel tank and fuel pump for a 20v in a ke70? MG
-
- 1 reply
- 4.5k views
-
-
Hey guys, Today I checked out a clean AE92 with a Blacktop conversion / C160 6 speed conversion. The car overall drove well and revved out nice. SOme issues were: When revved and hit VVTLI, black smoke comes out the exhaust. Not alot but quite a bit Idle is set at 2000rpm, when fan blower is turned on, tames down to 1500rpm. Anyone know how to or how much to fix these issues? Or not worth fixing?
-
- 6 replies
- 15.1k views
-
-
hey, I'm completly stuck! got a ke35 coupe striped down painted and ready for running gear, origanly i was gunna run a 13b bridge port with a carby, but i was told it was gunna be a massive and expencive exercise. so I'm looking for some good engine conversion ideas, something with a good power gain and not gunna cost me the world. thanks heaps
-
- 4 replies
- 15.6k views
-
-
Ok, Here's a question no one on earth has ever asked before: What's a good engine to drop into an '82 KE70? But not so fast! It has to be old school so that rules out 4AGE/SR20. 2TG or 3T hybrid looks like a viable option, but from what I've read on the forums and ol mate Google, they're heavy and slow in comparison to modern fuel injected engines. Another way to go I hear is to do some work to the 4K in the form of carbs and headwork etc. I don't have a set budget as I'm planning on keeping the rolla and therefore am not worried about overcapitalising. Having said that, I'm far from a corporate banking income so let's keep it realistic. Oh, and another th…
-
- 32 replies
- 44.6k views
-
-
All I'm confused about the cut and shut. Ive only seen the alloy manifold being cut and shut. I have a silver top 20v and the cover on the manifold is made of 1 - 1.5mm thick mild steel. Looks like the FWD inlet is braised on or something as i have cut it off and about to weld it up and the existing weld is a goldy colour. Am i doing it right? I'm going to find a piece of 70mm exhaust pipe and cut a hole in the other end of the manifold and weld it in as the inlet. Am I doing it right? Has anybody got some pics? Regards Mick
-
- 0 replies
- 2k views
-
-
just wonting to know a few things as a few of yous wood already know i have a 4age big port 16 valve out of a ae82, had been converted and fitted in to my ae71 few years ago i got the car a mess. Anyways i have picked up TWIN MM Weber's ( REBUILT PROFESSIONALLY ) & 4AGE Big port Manifold with linkages and air cleaners. Weber's were rebuilt by previous owner jetted for Datsun 1600cc engine and only run for a sort time before car was re ended. Manifold is brand new. i have allso ordered a 6al 2 msd box i have a gt40 coil but will get a new msd coil,leads to sute the new set up,looking at a start retard box allso, but just wait and see 1st. now do i or can i lock …
-
-
- 58 replies
- 311.9k views
-
-
Hey guys just after some advice from people who have done this or know how etc. Got a few ae's here at the local wreckers so there's a few available, just looking at some other options other than the ae71 pedal box. James
-
- 1 reply
- 6.3k views
-
-
Hi all, Very new to this. I have a 1979 KE55 sedan in great condition, it runs the standard 4k-c(149,000km) and 4speed box. I am looking to upgrade to a 5k with the 5speed gearbox, i have a few questions regarding this conversion I am on my red P Plates in NSW am I restricted to conveting the engine? Is the engine hard to convert regarding mounts, diffs, gearbox ect...? What 5speed gearbox options do i have? and any other tips and ideas you could give me? I have done a bit of research so far and I'm just gathering ideas. So all help and idea's are welcomed. Thanks heaps. Regards Nathan
-
-
- 11 replies
- 19.7k views
-
-
Hey all!!! This is my first post on this forum as I am looking for some help! I have a 1982 ke70 sedan running a 4agze. I am wanting to upgrade my diff. A friend told me that an ae86 lsd diff head will swap straight into my existing ke70 housing? Is this true?? Seems far too silmple to be true! Any help will be apreciated!!!!
-
- 7 replies
- 64.6k views
-
-
Hey guys, I know there's a topic about this already.. But I'm pretty bumped on the water pump setup and thermostat on the 4age, are they the same setup as the 4ac? And is it easier to wire the computer in an leave it efi, or get twin carbys for it? Cheers
-
- 2 replies
- 4.9k views
-
-
Hey everyone I'm just doing my 4age rebuild and I was just wondering the 16v 4age's have different cranks in oppose to big port- small ports or blue top and red tops! an easy direct answer would be super! Thanks!
-
- 3 replies
- 3.7k views
- 1 follower
-
-
Hello to all, about 18 monts ago i was given an AE71 Panel Van from a good friend of mine as he left for the AirForce. I drove it for about a year then took it off the road because of various mechanical issues. the last six months it's been sitting around and my extreme love for this car drove me to decide upon fixing her up. She's stripped at the moment and hopefully going into a panel shop in the near future to get some small rust issues sorted with. The main decision i am having issues with is wether i should drop a 4AGE into my car or re condition my 4AC engine and do a little work on that, I'm leaning heavily towards the idea of a 4AGE. Next question is what 4AGE…
-
- 26 replies
- 11.7k views
-
-
Hiya all, Just wanting to see what my pricing options are and to see whether or not it is worth to go for the better Sr20, or just go for a 4AGE. So this question is aimed at the people who have successfully engine conversed their vehicles; I currently own a 83' Corolla Ke70. I have some saved up money i'm wanting to spend on one of my cars, so on my JZX100, it will either be a Manual Conversion + LSD, otherwise for my Ke70 a 4AGE rwd or SR20DE or DET depending on how much extra it is to go all the way. So roughly how much ALL up including labour fees have you spent for your conversions to either a 4AGE (BP, 20V etc) or SR20DE/DET?
-
-
- 23 replies
- 15.8k views
-
-
Hi everyone, I'm in the progress of getting the engine into the AE71 corolla, but so far the problem is the engine cross memeber. The 1jz engine sump just right in the way and blocking the steering rack. Friend of mine sent me this photo a while ago, does anyone know this car? number plate XVL247 If you know this guy could you please intro to me? PM me Because I want to find out how he did it, I'm in the hurry to sort out this engine conversion problem at the moment, PLEASE HELP ME >__< or If anyone else knows how to fit a 1jz into the AE71, could you please help me? many thanks Henry
-
- 27 replies
- 23.5k views
- 1 follower
-
-
hey guys. i have a 1982 KE70 Wagon and I currently have a 4k in it. but i am looking at putting a 13B rotar in it. any technical help would be good. thanks
-
- 0 replies
- 3.9k views
-
-
hey i am new here i own a toyota corolla ae92 with a 4afc motor 70kws. i want to put a 4age 100kw in it but i am unsure if the block is the same and can i use the gear box and mounts i have? as it is a rebult one if any one can help me it would be great or any ideas? how i can get this to work. please help me
-
- 20 replies
- 45.4k views
-
-
hey guys ive just bought my first ke30 corolla :).. ive decided on a sr20det conversion using s13 crossmember,r31 diff etc. i was just wondering whats the best hydralic clutch set up to use? pedal box etc.
-
- 1 reply
- 3.5k views
-
-
Has anybody ever seen this done? i can get the two cars for a total of $1300, and i want to take it out to mallala racetrack in adelaide to drift it, can anybody offer some advice as to mountings or if I'm just wasting my time? Cheers, Jbag
-
- 8 replies
- 7k views
-
-
Hey just picked up this corona and wondering what engine you guys would recommend putting in it ? It's currently got 2tgeu with all it's running gear . I was thinking going 4age any ideas on how hard that be to do or how much it's gonna cost me ? All helps appreciated
-
- 20 replies
- 11.5k views
-
-
What do I need to do to get some good power out of my 3k without replacing everything! It has to be leagel on my p's too. I'm willing to spend some money but I wanna keep it old school
-
- 5 replies
- 5.4k views
-
-
Do 4 k extractors fit on a 3k? And also would they fit onto a 5k for when I finally find 1?
-
- 2 replies
- 5.8k views
-
-
will this engine fit in my corolla? its a 81 te72, and i need some info on this engine, it sounds like it would be sweet to drop in my car, also I'm in america, and i heard this was a JDM or euro motor also? thanks!:D
-
- 26 replies
- 20.7k views
-
-
Ok so tomorrow afternoon I have to go pull out my 4age from this guys house. Thing is I have to supply the crane and I have an Engine load leveler So my question is what is the best way to connect it to the motor?(D shackle's, Bolt it on some where etc) Sorry for such a noob/dumb/retarded question. A picture would be awesome as well. I just couldn't find anything and I'm kinda worried lol. This is my first time pulling out a motor. Let alone doing it at some one else's house so I kinda sort out the gear before I go. And any random tips would be lovely. Many thanks in advanced!
-
- 4 replies
- 3.2k views
-
-
been planning on doing a v8 swap into my 55, just for burnouts and tracks and have been offered a ford ltd with a 5liter windsor and auto all running for 600, i know nothing about fords so hoping some of you do? worth getting or what?
-
- 4 replies
- 7.4k views
-
-
Hi guys I'm a new member an just bought me a ke30 corolla 4dr sedan an got ripped of by a mate saying the running gear is fine but to my amazememt the gear box after inspection is rat shit ... Its going to cost me $800 to rebuild if i can't find a nice second hamd 3sp auto for it, after speakin to a corolla specialist he informed me briefly that a holden vn/vr/vs engine an gear box will bolt straight into my corolla so I'm thinking about takin this route but has anyone ever done it an what i need to do in the sense of brake set ups if need changing etc i hav a whole vr for the transplant so any help Would be awesome ... Kind regards creedy
-
- 22 replies
- 21k views
-
-
What's a good motor to put in my ke55? Something that won't cost me a shit load and that I can drive on my p's? Most I'm willing to spend on a motor and shit that has to be replaced is 5 grand! I want some power out of it too haha
-
-
- 8 replies
- 5.1k views
-
-
hey everyone am about to start my project of putting a 1uzfe into my ke20 and making it road legal but not real sure on what brakes, front struts/front suspension,steering,rear diff and rear suspension would fit best without having to alter to much. thanks
-
-
- 5 replies
- 8.9k views
-
-
hey I'm new to this forum thing but i have a couple of questions. i was thinking about putting a non turbo sr20 into a ke30. if anyone can help me with any of these qustions that would be really helpfull is it street legal in south australia? how much work is needed to mount the engine/ gearbox? what kind of diff is required for this conversion? does the body/frame need any strenghtening? any thing esle that you may think i need to know or any links for parts would be hepfull thanks
-
-
- 11 replies
- 142.1k views
-