Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
whats going on I'm new to the game i have a 96 corolla i was thinking abot doing a 4age 20 v black top wanted to know if it worth doing and if anny boody knows wher to get parts for the car
-
-
- 4 replies
- 4.2k views
-
-
Can someone please advise me of the easiest and cheapest way to convert the junk under my Bonet to something slightly faster as its broken needs a new motor and I'm poor its a 77ke30 rolla thanks
-
-
- 7 replies
- 3.7k views
-
-
Heya, Ok so basically I'm kinda new to the whole car mod thing and i was wondering if a few of you guys could help me out. You see, as with most ke55 owners, i have nothing but stock under the hood and i would like to change that as i am starting to fix up my little beast into...well...an actual beast. iv already started on the interior and exterior and its looking good so far but theres no point on a car looking awesome if it doesnt have the goods to back it up. so now i think its about time to start work on the engine. The only thing is iv got no idea on what engine will fit into the bay of my rolla with not to many problems. i have asked a few people i know, abou…
-
-
- 19 replies
- 129.6k views
- 1 follower
-
-
apparently the laws have been changed from what ive heard so is it still possible to engineer and register a ae71 4age in nsw does anyone know if its still possible and if so what needs to be changed/upgraded do i need bigger brakes and shit like that any help would be appreciated
-
- 5 replies
- 6.3k views
-
-
Hey I'm new I have been thinking bout doing this for a while I was going to do it 5 years ago but my first ke30 got tbones so I had to find a nother rolla and I finally found a good straight. One a few months ago I got the motor and box for free from a mate and a few bits and pices as well I'm just stumped on wear to start. I have done turbo conversions befor to my lancer and stuff like that but not a motor swap plz help it would be great Thanks Shane
-
- 2 replies
- 2.7k views
-
-
what is the process really don't want to sell it. so far got the engine. which gearbox should i use ? and will i need new cvs n hubs .
-
- 0 replies
- 2.5k views
-
-
just wondering if anyone has any pictures or information on how to make the standard heater work on a 4age engine any help would be appreciated just need to get it out of the way aswell as a few other things for rego and also does anyone know were to connect the plug on the exhaust to the plugs abit smashed so i might need a new one even so idk were to plug it too
-
- 0 replies
- 2.5k views
-
-
Hey guys I've been thinking about dropping a 1uz in my car does anyone know hard is it and what is it that I need besides motor trans wire harness and ecu. If could help me out I would be very thankful.....
-
- 15 replies
- 67.5k views
-
-
i have just brought a ke 70 and plann on doing an sr20de conversion, id like some guidence and id like to know 100% everything i need at this stage i only have the engine,box and loom! if you could help me out would be a grate help thanks :)
-
-
- 7 replies
- 9.9k views
-
-
So I'm thinking of buying a 3tc and setting up EFI and turbo.It's going into my TE31, 78 5 speed with a T50 trans. Anyone done this? Pics? Problems? Awesomeness?
-
- 9 replies
- 70k views
-
-
hey agan i have had no luck in getting my 4age running thats in my ae71 i wos giving a old ae82 i think? with a 4ac in it carby motor. i know i will have to change fual pump back to a low pressher,that i will have to change the frunt half of the exhurts system.i just wont to know if the water pump of the 4age will bolt onto the 4ac?? or will i have to leave the pump on and addapt a water system to change from frunt wheel drive to rear wheel drive. after i get car going and regod i will be looking into gaskets for the 4age and the carby set up and a 6al for spark. so i can do away with the injecton system becuse man i have wiring!! so yeah any info on the frunt whe…
-
-
- 25 replies
- 13.1k views
-
-
i have googled my head off searched number of forums and i can't find detailed info on whats needed to be done to put a sr20 into a ke20 corolla thought id say this because people will just say search button is your answer but its not ive tried over and over again. if there are deatiled links feel free to post every link possibe so its all in 1 place. also any pics of below questions would be helpfull. if some1 has done this conversion them self id love a phone number to have a chat about it. to start off questions are 1.what mounts or rubbers can be used as a base for custom mounts? 2.what gearbox crossmember can be used as a base to modify and how? 3.pro…
-
- 6 replies
- 43k views
-
-
Hello, My Name is Chris, i live in Perth. I will post some more pics and an in depth wright up when i get time. But i own a ke30 and have just about finished the conversion. I will load the pics if someone can tell me how to lower there MB?. Cheers :D Chris.
-
- 53 replies
- 49.7k views
-
-
Hey, I'm new to this website, but i have a ae93 with a 4agze and i enjoy the power, i also have a old 1975 ke35 coupe with the 3k engine. I have done a tonne of body work as it did have rust, but i want to make it a bit faster. i know how rare they are so i don't want to mod it too much. Would it be worth putting a 4k turbo rebuilt into it or go with the 4age? James
-
-
- 26 replies
- 62.8k views
-
-
Hi you all I new to this site: I have swap out my 4afe motor for a 4age tvis. got the loom splice together by a pro. the problem is the car will start run for 10-15 min then cut out. it seem to be running rich because of the black smoke that comes from exhaust. my temp gauge was working when I first start car up, after a few revs the gauge drop down to cold and remain there ever since. I have change the efi sensor that locate on cylinder head on gearbox side.; still no joy? can some1 please help me with some suggestion on what to do to get this car going properly. thanks
-
- 4 replies
- 10.1k views
-
-
Hey everyone, i was just wondering if i needed a different speedo cable for my ke70 which will be converted via 4age. i hear people talk about manual speedo for 4age but aren't they pretty much all the same? any help would be great, cheers
-
- 2 replies
- 3.9k views
-
-
just want to know what would be the best upgrade to get it sliding the standed motor just not enought so i can get 4age motor and wiring for $150 and a gearbox for $200 but is the something better with more power i know ill have to make engine mounts and gearbox mounts and c**t and shut wiring harness and maybe after market computer so let me know what use guys and girls think thanks
-
-
- 20 replies
- 16.7k views
-
-
hey me again i wont to know if i have a big port or small port motor?? as i wont to order a loom to sute the motor.just wont to make sure its right sorry i am a noob with the toyotas il post some pics cheers.
-
- 21 replies
- 23.1k views
- 1 follower
-
-
i was wondering if i put the 20v silvertop into my ae92 would i be able to put in a supra geabox... if so what would be my best option and if not..... what would be my best option. any explanation as to why/why not would be immensly helpful. thanks. Nick
-
- 7 replies
- 8.1k views
-
-
hey guys I'm in need of some assistance as I'm buildnig a turbo setup for my 4k ke70 the idea so far is to use... -mitsibishi turbo -blitz external gate -350 holley -3k bigport head (with a full port job on it) -turbo grind on the cam -front mount -carter fuel pump -bosh coil -5k dizzy -oringed block -plus more but i feel that the pistons wont last long so i have to choices 1. use 4k dished piston... do u have any, i can't find any? lol 2. use turbo chrade pistons... how easy is this to do? what needs to be done? will they bolt up to the stock rods, etc? thanks guys from pat p.s. any help will be usefull
-
- 64 replies
- 96.5k views
-
-
ok I'm new to this site,i hope somone can help me.i just picked up a ae71 1984 it has a 4age(not sure whot 4age it is)in it wos a running car, the bloke i got it off tryd wiring in a haltech f9 into the stock ecu loom all he dun wos shop everythink to shit and now the car will not start its a mess! anyways I'm planing on going a new loom or a full stand alone haltech whot shop wood do this job for me and get car running i will have about 2grand after xmas I'm in country nsw 6hr drive from sydney but i am willing to tow to a desent shop I'm thinking a full stand alone haltech ecu as. i wont to turbocharg the motor in 6 munths time i just wont the car sorted out and runnin…
-
- 0 replies
- 2.6k views
-
-
hey guys, I'm new to ths rollaclub forum thing so bare with me . i purchased a KE30 2 doors with a 3K with a 5 speed box behind it. I started just stripping the interior so i could put it back to origanal. but then i didnt like the colour of the car it self so i stripped the whole car even the engine. but now since the engine is out i want more power. what is the easiest engine conversion you can do on a ke 30 with minimal modifications?? I was thinking a 5k cheers
-
- 17 replies
- 12.2k views
-
-
-
hey peoples, not sure if too many people have done this, (know of one) :) in the near future I'm rebuilding my ke20. when i say rebuild i mean completely strip it, redo the body and then fit a 13b turbo, rx7 5 speed, hilux diff, brake upgrade etc. just wondering if anyone has any info at all that would help me with this project. Cheers heaps Tom
-
- 19 replies
- 33.7k views
-
-
Hey, I have got a 1975 toyota ke 35 corolla coupe, and have a rebuilt 4k turbo, which i have to get some things done to. I was just wondering what does the 4k motor need done to go into the body. It has a 5 speed and i know that the motor will mount straight in. But i need some guides as i want to get the flywheel lightened and to what weight. ? Um, one other thing that was pestering me was the fact that i heard someone say something about the 3k alternator was needed to be used as well as water pump? Please leave me anything that needs doing? James
-
- 0 replies
- 4.5k views
-
-
Hey rollaclub memebers. If anyone needs to know how difficult it is to get a 13b rotary into a KE70 Corolla, I can tell you. I've done this. Things to consider:- -turbo or N/A -gearbox type -fuel injected or carby -series of rotar -type of corolla KE70 or AE71 -budget $$$ What I chose:- -N/A (extend port)150-200hp -RX5 5spd Gearbox -48mm IDA Webber Carby -Early 4 port 13b w/ s3 RX7 electronc distributor. -KE70 (clean no rust) …
-
- 17 replies
- 176.3k views
-
-
hey there i am about to try to undertake a 1uzfe conversion in my mx73 cressida and was wondering if anyone has done it before or knows anyone that has. any info would be great.
-
- 5 replies
- 38.3k views
-
-
hey everyone, I'm from ireland and i have a ce70 panel van, its a great little runnaround, but over the past few months ive been looking for more power out of it, and instead of goin down the routes of 4age etc, I'm sticking to diesal purely for economy and putting in a 2ct, as i have a ke70 estate with 4age running gear also for the weekends. my question is has anyone ever done it before?? or have a link about more info on this? my plan at the mo is to buy a fwd 2ct, and change over all the rwd stuff (from a spare rwd 1c engine that i have lieing around),, water lines and pumps, sump, and orther brackets and stuff to make it fit will it be as simple a…
-
- 4 replies
- 3.7k views
-
-
So with very little info going around on 4k-c to 4k-e conversion I thought I would start a nice an simple thread that could be put into our library. Everything used will be standard from a 4k-e onto a basic 4k-c, the internals of the 4k-c will not be touched. Hardware 1) Air Flow Meter 2) Throttle Body 3) Intake Runners 4) Intake Manifold Adapter 5) Fuel Rail 6) Rocker Cover 7) Electronic Distributor 8) Ignition Coil 9) Oxygen Meter 10) 4k-e ECU 11) Thermostat housing Electrical Toyota Starlet Maunal 18 Pin Connector E2 - Earth IG - Igniter / Injector Pulse Signal VS - Air Flow Metre /…
-
- 26 replies
- 104.4k views
- 1 follower
-
-
Hi, New member, noticed you has a engine conversions section, thought I’d pop a couple of pics of what can be done if you put your mind to something, stop talking about what might be a good idea and just pick up the angle grinder and start cutting. :blinks: Took me two years. Ls1, power glide, 4 link, 9 inch, molly cage, rack and pinion, 5 stud…. Fun times. Makes 300kw at the wheels aspirated. Cheers, Johnno
-
- 33 replies
- 107.1k views
-
-
Hi guys, Firstly I'm in surfers paradise Qld. I have a fwd 4age engine. Want some one to fit it in my ke70. Don't have cross members, tailshaft, rwd manifolds or anything else that is needed to make it happen... I'd like to do it myself eventually when I get all the parts, but At the moment have no garage or place to do it. Any info on business or wicked backyard bandits in the know how that is equip for the job would be appreciated. Thanks guys, Scott.
-
- 2 replies
- 3.4k views
-
-
hey, I have recently been thinking what engine to put into my ke35 coupe and have just thought of a 2jzgte out of a supra or a 7mgte. Does anybody know if this is possible and wether anyone has done it before? I'm also wondering wether i should spend money on a 4age conversion or wether to go with a 4k turbo. I just also ponder wether i would ever be able to get a 2jz licesences and wether i have to chop all the firewall tunnel away? ResponseS? James
-
- 2 replies
- 11.3k views
-
-
hey all I'm gunna be sticking a vp v6 into a ke70 and wonder if anyone knows wether there is any links i could use to find out wiring or any sites to help do this conversion and what I'm expecting and wats the best to use for handling, what diff to use and how to make tail shaft fit.it will be just a flick switch ignition and no dash as car will be a track car for fun.
-
- 6 replies
- 14.4k views
-
-
Below is a link to vsb14 (vehicle standards bulletin 14) it goes through in detail the rules and regulations for modifying a vehicle, including engine conversions. From what I have gathered it is what all the states and territories base their rules on ie how big an engine can u put in vehicle X. Not sure if it should have gone here or somewhere else but here it is: http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/vsb_ncop.aspx
-
- 5 replies
- 3.2k views
-
-
Hi all, just a bit of a strange question i guess, is it possible, or worth while, putting a 2zzge and 6spd box into a 1989 AE-92 corolla seca? vehicle currently has a small port 4A-GE , it's original engine. Just an idea one of my mates put to me today. Any info/thoughts/opinions appreciated
-
- 11 replies
- 68.8k views
-
-
can i bolt a 4age twin cam head onto a 4ac block in order to bypass the stupid nsw laws?if so how do i go about it?
-
-
- 15 replies
- 26k views
- 1 follower
-
-
-
-
has any one done a converion and put a sr20 into a ae71 or ae86 that can help me out on info on how u would go about doing the conversion ? and is there anyone in aus that makes pre made engine mounts to bolt a sr20 into a ae71 / ae86?
-
- 1 reply
- 24.6k views
-
-
hey fellas, iv read up and people say to stay well away of the 18rg.. but i have come accross a complete, running celica with the 18rg or 18ru? twin cam twin carb etc etc for $500. and the old 4k isnt too healthy anymore, so it seems like the perfect oppourtunity to ditch the 4k for something better. has anyone here done this swap before?? will the celica x member bolt to the ke70? will there be any trans tunnel work? ANYY info would help alot. cheers! :)
-
- 3 replies
- 10.4k views
-