Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
I have a AE92 1.6L seca, 5sp 4cyl, i'm just wondering what motors could be put in this beast of a car, to me it's lacking alot, i want speed and acceleration (open to idea's but must be P Plate legal QLD) I want alot more oomph when the pedal hits the floor :P Also this model is carby so yeah. Any and all tips are appreciated! Cheers P.S - If you need i can pop a picture of my current engine/engine bay, and a glamour shot of the body. =]
-
-
- 11 replies
- 11.1k views
-
-
Hey guys can't afford the ca18 conversion for at least a year but still want to cruz with something and not go backwards.. Lol the 3k is a slug with the 2 speed auto.. Been offered a 5k with manual to suit and all of it, went in a ke30 that has it and goes bloody good for it stock. But will do exhaust cam and. Arby's upgrade.. But what else would be good to give her a bit of more oomph.. I know it isn't going to be a weapon but it will be a huge step up from what she is.. Even if someone is selling a turbo set up to suit or can steer me in the right direction that would be sweet.. All of it will be done right after the roady, pretty much the next day after its …
-
- 4 replies
- 4.5k views
-
-
Hwy guys been tryin to read up as much as I can,, Been looking at putting the 5k into my ke25 with a manual, fairly cheap drive away.. Wondering about efi, would I use a head/manifold off a 4k-e or the 7k for fuel injection and have the turbo set up that way? Or just go carby with turbo set up.. What's everyone's honest opinions?? I know it isn't going to be a rocket ship but I just wana have fun.
-
-
- 2 replies
- 9.1k views
-
-
Okay so was told today that my car has a 3k motor but the tags say it a 4k how can I tell witch or witch and also they said the 3k and 4k are both fuel injected?
-
-
- 8 replies
- 11.4k views
-
-
Is there fuel injected version of the engine that's in the KE30?
-
- 3 replies
- 3.9k views
-
-
Hi guys, I'm new to this forum however in no time think I will become a regular :P Anywhoo I've Recently bought a 1983 ke70 in pretty unmolested condition and was wanting to swap out the 1.3L with a 4age turbo if I'm correct? Through some research i've gathered that some 4age's were FWD? thus what would be roughly needing to be modified if buying the fwd engine? Any previous threads and experiences or just a point in the right direction to where a cheap conversion would be would be much appreciated, cheers :) Also, Just a heads up as I wouldn't be registering her rather using her as a sleeper/slider.
-
- 7 replies
- 8.8k views
-
-
wuz up people, got a 4age turbo in my ke30 coupe, just blew the head gasket and wanted to do the motor over any suggestions.
-
- 0 replies
- 2.8k views
-
-
So I'm looking to put a new motor in my ke30 but to put a SR20 in its going to cost me 10-15 grand to change shit around.. does anyone have any ideas of something cheaper and easyier. I'm on my p's and want a bit got power but I'm not will to pay 15 grand!!
-
-
- 18 replies
- 13.6k views
-
-
Hey does anyone know the power to weight ratio for p platers in Vic? I've just scored a ke30 and I'm wanting to put a new motor in it. I've been told by a few to put a SR20 in but not 100% sure if it's legal?
-
- 1 reply
- 3k views
-
-
Hey guys been a while, slowly getting work started on the car, been a few issues stopping me lately, but finally getting there.. I was planning on a ca18det turbo for the rolls but due to not that much funds anymore those plans have been put on the shelf for a while.. I have read about 4k and 5k motors.. And was wondering if I could get some info from u guys on them and how I go about it, I know It must be annoying getting questions like these but I am genuine in doing what I'm set out to do and not out to waste anyone's time.. And I love turbos... Haha how do I go about it for that side of things.. And tranny set up? Can I keep the 2 speed from the 3k mo…
-
- 0 replies
- 2.6k views
-
-
Hey, just wandering if anyone know if a 2tg engine out of a 75 celica will fit in a ke35? Thanks
-
- 8 replies
- 10.8k views
-
-
What I want to do is put the 7mge from my mx83 into my mx73 which I can do easily, but I would like to put a ford 5speed in instead of a w58/r154 also I don't really have the money to get a r154 lol. What I would like help with is what would I need to put the T5 into my mx73? What I've got is the T5 & a exedy HD clutch and the pedal box that the T5 came out of.
-
- 7 replies
- 28.7k views
-
-
ive got acess to a supra 1jz motor will it fit into my ke70 and is it legal
-
- 8 replies
- 36.7k views
-
-
hi guys and girls names toby just brought this 36 wagon about 2 months ago and now need help with some things i just brought a 4age,t50 box,custom made engine mounts and gearbox mounts and now need help with fuel issue now because standed one wont handle it and if any one could help with it or know of more issue ill will come across and r willing to give info and addvice will be really grateful for every little bit thanks iam getting it ready to paint atm and doing 5 stud conversion all round for it so thanks for looking at my post and hoping some one on here can help me out as its my first corlla that I'm doing up thanks again guys and girls
-
-
- 19 replies
- 19.3k views
-
-
hey guys this is the conversion so far i need some help/suggestions for -engine mounts -how to get rims considering every shop tells me i can't get some due to offset and older style stud pattern.. -also do the 20v and the 16v have the same exahaust mainfold bolt pattern, because i have found a rwd exhaust manifold for a 20v and don't want to buy it without knowing first..?? any help would be good :)
-
- 12 replies
- 24.2k views
-
-
hi there, currently doing the bodywork on my 77 ta28 celica,would like to fit a 4agze,converted to rwd, from what i have found out ,i need an ae101 engine,with a ae86 t50 box,anyone got wiring diagrams,for this conversion, also what rear axle/diff/ratios, should i use,any tips for brake/suspension upgrades as well,i'm sure someone has done this conversion, so a list of parts/photos/tips would be greatly appreciated(ireland), thanks ,
-
- 3 replies
- 4.7k views
-
-
decided to go with the ca18det and not an sr20 gonna make my own mounts and id love to see or talk to people that have done this before. few questions.. 1.how would i go about making the mounts and can the standard ca engine mounts be used with custom mounts on k frame? 2.have ke70 disc on fron..will they be enough? 3.can the stock ca gearbox cross member be used? 4.what clutch pedals can be used in a ke20? 5.will i have clearance issues with a ke70 booster and a clutch master? cheers guys.. I'm sure ill have more questions 1ce i get started.
-
- 38 replies
- 89.3k views
-
-
Ok guys i need help deciding what I'm going to do with the engine, suspension and breaks of my Ke35 coupe ? ANY Ideas ? please share For the engine i was thinking a SR20 what gearbox would i need and diff ? ----NON TURBO---- Here is my car http://www.rollaclub.com/board/topic/57710-aus-corolla-ke35-coupe-proj/
-
- 0 replies
- 2.4k views
-
-
heyy all ive bein hunting around trying to set up my fuel and ign. for my corolla, its bein the biggest headʞ©$ɟ!! mind my language. A mate mate converted his xf to run straight gas as its turbo... he rekons its alot smoother n alot more powerful on jus gas.. just wanted to see if anyone has tried this on the 4a or 7a turbos... and how wuld i do the mechanical or vac for the dizzyy as ther will be no ecu.. thanks shayden
-
- 31 replies
- 18.4k views
-
-
-
Hey, I'm just thinking about my mates 1980 Corona wagon, The motor and gear box (auto) is stuff! What engine and gearbox would bolt into this without changing much? And how hard would a Manual conversion be?
-
- 0 replies
- 3.4k views
-
-
Hi guys just joined thought I would put up some pics of my car Just got to work out how to up load them
-
- 0 replies
- 4.6k views
-
-
-
Hi guys just after info on a soarer 1G-GE motor I am currently rebuilding it and plan on using it in my ke35 hardtop and I know I can legally do it and still get it registered but i'm wondering what manual gearbox can I use with the 1G-GE motor and what sort of diff setup will I need for it this motor will be pumping out close to 300bhp when its done
-
- 6 replies
- 7.3k views
- 1 follower
-
-
Hey guys I'm looking for a black top 4agze to go in my ae92 , price ? installation how hard is it what do i need ? please help!! i want power out of my rolla
-
- 1 reply
- 3.8k views
-
-
can this conversion be done engine looks same
-
- 4 replies
- 5.2k views
-
-
Hi all, I've been searching out info on this swap for a while, It's been done before > http://forums.club4ag.com/zerothread?id=24643 but I found a lot of problems which weren't covered by that build or the 4agze that has also been done. Here they are in no particular order 4AGE Alternator is on inlet side - need to relocate to exhaust side or remove diff-lock actuator on gearbox (same as blower issues on 4AGZE) 4AGE Air-Con pulley is 4rib and on the outer pulley - 4AFE is 3rib and on the inner pulley (no solution but to use 4AGE aircon) Need to modify one intake support brace (uses same bolt on block as gearbox supports) if you keep the alternator …
-
- 13 replies
- 44.2k views
-
-
Hey guys! just curious on throwing in a v6 cressida engine in my ke 55... cheap enough so i thought why not... sooooo a few questions if i may. Is it possible? with minimal effort? has anyone considered it? any one know anything bout trannys? if the ke55 will fit on? please anyone with answers or any kind of help is a mad kent Cheers fellas Nik
-
- 8 replies
- 7.8k views
-
-
hey hey,, I'm putting a 4age into my ke30.. looking for engine mounts for conversion.. does anybody have some, or can make them, willing to pay cost and postage.. cheers.... reply here or feel free to contact me.. 0414154521... thanks again.
-
- 7 replies
- 4.9k views
-
-
hey there. started a new project and scrapped the the other 3t gte ke20 project for now. purchased a very clean and straight ke20 last week. and have a 4age i wanna put it a little about this engine. ITS OFF ITS HEAD... literally. my mate had it in an mg be4 it collected a pole and now its mine a few thousand later he dyno'd the car at 280kw at the wheels, on 7psi. btw the engines turbo'd. t3 this engine is going to run daily at 30 psi. yes believe it or not 30 psi DAILY my concern now, is what diff to use. i want something light. my other ke20 has a fiat diff, but I'm not sure if it will handle that much power. i need the diff to be tuff ive considered hilux …
-
-
- 55 replies
- 58k views
- 1 follower
-
-
Hi guys, I'm a new member here so please be gentle :P lol I have done a fair bit of reading over the last few weeks, and i have bought a ke25. I'm looking to do a 3sge beams conversion, but I'm not into EFI, Through reading forums and google I have found people convert there 3sge beams to Carbys, but I'm not able to find any actual mechanical info, just photos and pretty much them writing 'this is my beams on cabys'. So i was wondering if you boys had any knowledge on this topic????? Beams on carbys would sound sweet :wink: and help would be appreciated, cheers
-
- 14 replies
- 70.5k views
- 1 follower
-
-
Ive been on the internet for days on this and I want clear answers!!!, If anyone on this form can answer every question then this topic, this will help others and me on the quest for the 4age swap :P For the 4age back top, I can get one compete with tranny, harness and ecu for only $1000 from jdm dealers in toronto and I already have a almost Overrated 1989 corolla manual with the crappy but running Overrated 4af motor with a/c. These are the main things I need to know for now. 1. Is the engine direct swap? and does the mounts fit directly on the stock ones? 2. does the drive shafts from the stock 4af fit directly onto the 4age tranny? 3. What about the s…
-
- 0 replies
- 10.3k views
-
-
Right, this is just an idea. I'm not considering doing something like this because ; A, I'm broke, B, I don't want to and C, to be honest, it's pretty crazy. I've only ever seen one thread mentioning the two paired together and only heard one person throw it out there as a crazy idea. I'm just wondering if anyone knows of or has thought about this for a different swap. K20A into Xe7X or any ke corolla for that matter?? Anyone got any thoughts, comments or know of a car with this conversion? I google searched it, I searched here on rollaclub and a bunch of other toyota forums but couldn't find anything. After dealing with the RWD side of things, what other problems do yo…
-
-
- 21 replies
- 12.4k views
-
-
hey lads, i have been doing some reading on the 3sgte, i have had a little look around rollaclub but cannot find a 3sgte convrsion thread. if anyone knows where it is or could link me up that would be sweet. or if you have any comments or knowledge let me have it :P going Google crazy atm lol cheers
-
- 9 replies
- 10.3k views
-
-
Hey guys just wanted to clear some thing up before I go ahead and buy a box for my ke55 gze conversion. Does the t50 bolt up to the 4a without having to change the bellhousing or is that the W series box's ? Also not sure if there are any floating around but iam looking for some pre fab engine mounts and gearbox x-member to suite the conversion any help would be grouse cheers and looking forward to you response
-
- 2 replies
- 2.7k views
-
-
Hi guys, I am in need of some help to make a decision on what engine to put in my ke25. A 5k, 7k, 3sge, 4age or 2TG. I have looked and read sh!t loads of threads, posts, reviews, comments on each, yet cannot make a decision. Myself, mate and old man will be able to do most if not all of the work ourselves, obviously looking to keep the cost down, but not much of an issue. I want a daily that will have the chance to embarrase or surprise people :) I thought it was time to bring it to the rollaclub people and see what you dudes think. cheers,
-
- 45 replies
- 56k views
-
-
Just looking for some opinions on this swap I am about to tackle. I have committed to this swap and I am sure I will be called crazy but this forum looks forgiving enough to share my ideas. I have a 1987 BMW 325i which I am going to use as a donor car for my '75 corolla wagon. I will need to chop the firewall to make room for the long straight 6 or relocate the radiator. But for weight distribution purposes, I think chopping the firewall will work out better in the end. I will be putting a lumpier cam, lighter flywheel, exhaust, and chip right off the bat and I will probably get around 170hp. The motor has 170 ft/lbs of torque stock, so I can only imagine what that will …
-
- 1 reply
- 2.3k views
-
-
Men (and women), can i please get a quick rundown and a few opinions on the 7k engine and a swap into a ke25?! I have done that much reading in the last 48 hours my brain is going to implode. A rough rundown and I will be able to fill in the rest. I have looked at a 3sge conversion, 4age, 2TG. There are so many different opinions and threads and some are easy and some are not. Pleeeease help haha :blinks:
-
- 3 replies
- 5.7k views
-
-
hi guys I'm looking at putting a ca18 into my ke70 I'm just trying to find out what parts i will need to do it or is there any info on how do do it cheers
-
- 1 reply
- 5.2k views
-
-
hey everyone i got a ke70 and carnt make up my mind on what engine i should use. just want to know what would be best to put in it and how much work it involes open for any ideas thanks
-
-
- 6 replies
- 5k views
-