Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. Started by bally,

    Hey guys I'm currently doing a conversion on my KE70 as the 4K decided to throw a rod on the freeway. So I've picked up an AE82 with a 4AGE and a JDM T50 gearbox. I've been told the thrust bearing isn't the same as the AE82 so ive been trying to get one but havn't had much luck finding it. Does anyone know of any clutch places I can go and see around VIC? or even someone I can call? or a part number? Thanks Bally

    • 6 replies
    • 4.6k views
  2. Started by rollaobsessed,

    I'm looking to drop an engine into a KE70 corolla, but not sure what engine i should be droppig in, cheap and reliable is all I'm after atm but later on ill be keen to drop a sr20 when the rest of the rolla is complete.

    • 15 replies
    • 5.8k views
  3. Started by Twincam16seca,

    Does anyone in S.A know of the legallity on putting a beams 3sge into a ae71? I have decided to "upgrade" to the corona xt130/rt132 fornt suspension with the twin piston setup, slotted rotors+ebc green stuff and corona disc brake diff, not sure if this would suffice though? I want to do a conversion and I'm up against 4agze-no loom or ecu + all the gearbox etc is needed, or a beams 3sge with loom 6 speed but no ecu? I would rather go the beams as its NA/simpler! but its a larger capacity engine so was wondering on what i'd have to do to make it legal? This is the kind of set up i would like to end up with If anyone has a link to a site or something it woul…

    • 8 replies
    • 6.3k views
  4. Started by yohan18,

    hey guys just recently done a 5k solids conversion in my ke70, the work I have done to the motor includes: decked head 3 angle valve regrinde new valves new valve seals I also got the block decked bored out .0020 thou new piston and rings to suit mild street cam crank grind new seals and gaskets new timing chain and sprockets and I used 5k hydraulic lifters and gutted them out and used them as cam followers, then I used 4k pushrods of length about 186 total length with 4k adjustable rockers and it runs so good no rattle from rockers, all machining of these parts where done by rose engine reconditions at browns plains, I fitter everything myself an…

    • 4 replies
    • 4.6k views
  5. Iam putting a 4agze now 4agte engine into an ae86. I have purchased an new rwd water pump but need the fitting to go from the head to the water pump and is also to top ratiator hose fitting.

    • 26 replies
    • 7.7k views
  6. Started by d4ng3r,

    sooo i want to upgrade the engine from the ke and was told that a 12a/13b wouldn't have to be engineered, is this true? would any one kno of any decent engineers that could assist me in this venture I am in nsw Thanks deano.

    • 2 replies
    • 3.8k views
  7. Started by Joyno92,

    Hi all first post here before I'm new to Toyota's only ever rebuilt holden motors and not very up with this EFI. To get started a few weeks back i was given a corolla ke38 pretty sure thats what it is anyways. I'm planing on converting it to a 4age or ca18det what would u recommend. I haven't got much idea as to what i will be needing for the wiring side of things like ECU etc. i thought it would make things a lot easier if i could find a half cut or something. from what i know it has a 4k engine with a 4 speed manual box. I know i haven't got all the details but if anyone could help me out a little bit it would be greatly appreciated. Many Thanks in advance. Ga…

    • 5 replies
    • 7.9k views
  8. Ok, soo I've got a 4age in my KE55, got the engine mounts redone so the engine is sitting level and the tailshaft is running true, but the problem is I still get vibration when I rest my foot on the accelerator gentley, and when I'm doing 110 on the highway, its better with tailshaft trued but I'm still have the vibrations from up front. Getting rid of my rims so no more spacers as that was one part. But if anyone has had the same problems please tell me how or what was done to fix it, as Thanks

  9. Started by pynzie,

    i have a ke55 coupe and i have a 4age motor but i have no idear what to do on how and what i need to do to get it to fit in like gear box wireing engen mounts stuff like that so can u please help out

    • 3 replies
    • 3.4k views
  10. Started by sprattz30,

    Ok hope someone can help me here no search results. I have a ke30 2 door and want to upgrade to turbo efi. I also can have a 4efte low ks engine loom ecu etc for a few cartons of piss. Good little motors I've heard, but need to know wich box to use, or can I make adaptor plate for me box? Any info is GREAT. cheers.

    • 3 replies
    • 5.3k views
  11. Started by 4-ac=PowerHouse,

    alright so i've currently got an ae71 but the body is pretty shot, one of my mates is selling a slant front ke70 rolling shell, just wondering how hard it would be to convert from the cable clutch to hydraulic? i'll just be putting in my 4ac for now and when i get some funds together, hopefully i'll drop in a 4age :D if anyones done this before..pretty sure someone has..i'd love some tips cheers

    • 2 replies
    • 3.2k views
  12. Started by CodyTravers,

    G'day, I'm going to put a 4AG-ZE into my KE70 and was wondering if anyone on this site knows what parts are needed and a few short steps of the things that will be involved with install. Is it better to get just the 4AG-ZE? Or Get a half-cut? Cheers Cody.

  13. Started by 78corolla,

    could anyone on the site that knows of any Aus companys that do a rotary crate motor post a link please

    • 16 replies
    • 83.6k views
  14. Started by e3469,

    Please tell me Which Diff should i use in my ke35 with 3sfe...i want rear wheel disk breaks for my ke35.....or what alteration i have to do in stock diff for making rear disk brakes..... thank you....

  15. Started by e3469,

    can't find any good engine....so bought 3sfe.....how can i increase Hp in 3sfe.......wht about turbo or supercharger....please help me......

  16. Started by 4agteke20,

    hey people iam looking for two front guards of a ke20 if anyone has anything let me know iam in blacktown area thanks

    • 2 replies
    • 4.1k views
  17. Started by e3469,

    hi all... i have corolla ke35 1976..i wana change its engine....can i install toyota celica 3sgte 2000cc engine in my car or do u have any other suggestion....pls do tell me.. thanks.....

    • 17 replies
    • 15.7k views
  18. hey iam putting a 4age in a ke20 just wondering what mounts an stuff would i use

    • 5 replies
    • 2.5k views
  19. Started by rollas-r-us,

    After doing a quick search nothing that helps me specifically was found.. I have decided like many others to do a 4age conversion... I have been told that if i stay with the 4age, it will bolt straight in.. I have ae92 which 4age models does this include? I think I will try and find an sx seca as a donor as gearbox and random extras like the dash will be included.. what do you think? Thanks for your time Tom

    • 10 replies
    • 7.2k views
  20. as title i need to know where i can get some engine mounts for a 4age to go in a ke30 corolla

  21. Started by pol090_ke11,

    Was just wondering how hard it would be to turn a sr16ve to a rwd turbo for a ke11 if any one has any information or has done this kind of conversion before please let me know, here is a picture I found of one in rwd form in a datsun 510.

  22. Started by james87,

    hey, I'm new. yes i tried searching. i played with dattos . never touched a toyota until yesterday. bought a ke55 sedan 4k auto the best i could find didnt help , i don't mind if this thread gets ko'd as long as someone can help me along as in using and how to find across the site if not front suspension ( coilovers ) front disc upgrade and engine conversion now with these i have seen threads but they don't exactly explain to a noob :( prefer 5k motor or a 4age RWD ( mr2 ) and possibly the diff if its needed i have no idea .. the hilux rear axle thread is useless ..... though sounds good.. please help

    • 7 replies
    • 22k views
  23. Started by bally,

    Hey guys I'm in the process in doing a 4age conversion in my KE70 and i've recently bought a JDM T50 box. I've been doing a lot of reading and I've been chasing a AE71 pedal box for the conversion and was told a T18 pedal box would work? Is this correct??? thanks guys!

    • 2 replies
    • 3.5k views
  24. Started by 7FOUR7,

    G'day everyone, just wondering who has had custom engine/gearbox mounts made up by a professional for an engine conversion in their rolla and how much they cost. I'm putting a mental ca18 into my ke20 and need to know what I'll be looking at cost wise. Any help appreciated, cheers

  25. Started by lph247,

    i had a peek at the forum but didnt find anything too helpful, just want to know if its worth wacking a 4ac RWD into my ke35 or just rebuilding the 4k in it. much efford to put the 4ac in ther? cheers guys

    • 3 replies
    • 1.7k views
  26. Started by 80ke70,

    Hey guys i have a 1980 toyota corolla with the 4 round headlights in the front not sure what the model is as far as ke** or w/e but heres a pic of what it is an was wondering if someone would know what ALL would i need to throw a 4age into my car i found one currently here in the states with only 85k miles pretty stoked just wanting to know what i was gonna need thanks.

    • 14 replies
    • 4.5k views
  27. Started by bigblackcat,

    My 77 ke30 has a 3kc 5 speed in it right now, but I would like to upgrade to a 2tc/3tc at some point. What will I need in order to mount this engine in my car. I also want to retain a 5 speed tranny; will my 3kc tranny work with the 2tc/3tc engines, and what will i need to convert the manual clutch cable that goes from drivers side to passengers side to a hydrolic clutch?

  28. Started by Killar_of_giants,

    4AGE. I was looking on http://www.toyodiy.com/parts/ and noticed that the end plates between motor& gearbox is different between front and rear wheel drive set ups. I have a complete AE82 twincam that Ill be taking the engine out of and bolting to a jap T50. Questions - 1. Will I need an engine end plate from either an AE86 or AE71. 2. Will I also need the 2 gearbox to engine mounts from the AE86 or AE71?

  29. Started by bally,

    Hey all! I've recently purchased a KE70 and am planning to make it into a little track hack but I need a couple of pointers to get started. First I need to work out what 4AGE I bought lol is it a bigport series one (i think bluetop) or series 2 (redtop?). There is an attached image if thats any help guys. The engine is currently resting itself in a 1985 corrolla sx AE82. Secondly I've been doing some searching on the forums and I couldn't seem to find a wiring diagram for the loom. Do I have to combine the two? Or can I just run the complete AE82 loom? :blinks: Any help would be much appreciated. Bally

  30. Started by 80ke70,

    Hey was wondering if i could throw a 3tc out of a 1980 corolla into a 1982 corolla sr5 with the 4ac an if not what modifactions will i have to make thanks.

    • 13 replies
    • 19.5k views
  31. Started by big stoj,

    hey I'm asking a broad question. i went to mallala on the weekend to see my friend do competitive drifting and was wondering what would be the easiest engine to put into my KE70 with the best out put for this type of racing.

    • 4 replies
    • 4.8k views
  32. Started by jimmy-d,

    Pls don't shoot me,I'm new,I've read lots and lots of posts but have not seen it mentioned and I have access to the parts. Yes I can weld,yes I have painted,yes I have built cars before although pretty basic compared to some of you guys and I can manufacture. I have a KE70 slant nose '83 model near complete but with no engine and partly dismantled interior,was 4k auto,also have access to a 1.8ltr twin cam manual(RWD) from an Alfasud so thought it may be interesting exercise to do. I'm in Vic so not sure 100% about legality but I think KE=910kg x 4 = 3.640ltr so capacity Ok,not sure about power/weight ratio. Has anyone played with this setup before or what do you think? …

  33. Started by MAD ROLA,

    howz it going, got a KE70 and wanna get a bit more power out of it to atleast make it slide in the dry, but don't wanna spend big amounts and don't need HUGE amounts of power out of it. just wanna know what people think as far as engines or mods? its a 4k 5 speed, should i mod it? some people say 3k head, webbers and extractors and be good some say just go a 5k? how much better are they? efi conversion? any other cheap ideas? mods or conversions? probably not 4age unless really cheap... or even CA18 or whatever

  34. Started by grillbar,

    evening fellas, so I'm looking around at engines for my ke35 and came across the beams, it certainly sounds like a most sexual choice of engines for my dirty old rolla just wondering if anyone has done this particular conversion and what general problems can be expected with this particular conversion, but more to the point, after successfully making this conversion, or something similar to it, was the car street legal? or was it kept for the track? if anyone could clue me in, it would be muchly appreciated cheers grillbar

    • 5 replies
    • 14.3k views
  35. Ok so in the hope that no one flames me for asking a question related to 4AGZE -> RWD with all the information available, I am looking for a list of car models of which the starter motor can be used with an AE71 T50 behind an AE101 4AGZE with an AE92 212mm flywheel, please! I cannot find a definitive answer, sure there's people who say a 4AC starter works and 4AGE starter works, but are they talking about starters from FWD or RWD format etc. Common sense says the AE71 4AC starter and AE86 4AC/4AGE starter would be immediately obvious, but was the flywheel not a smaller diameter? Does this hold no bearing on whether the starter can be used or not? And on top of my quest…

    • 16 replies
    • 40.3k views
  36. Started by drift-kidd,

    hey guys iv been seaching for a while, on here on google and can't fine what I'm looking for, all i want to know is what do i need to get the motor in and driving cheers for anyones help.

    • 8 replies
    • 10.2k views
  37. Started by 7FOUR7,

    Is it a straight bolt in affair? My ke20 came with a spare 4k and 3spd. My car is currently 3k toyoglide and whilst I'm building a nuts 5kt I wouldn't mind dropping the 4k in for a bit extra tourque to get up hills etc

    • 3 replies
    • 2.1k views
  38. Started by Womble1972,

    Hello I am trying to gather some information on the 3UZ 4.3lt V8 (out of a toyota crown) What i am after is a toyota engine manual.(Been looking seen a couple 2UZ manuals but no 3UZ. That has the rebuild specs and fault codes. I don't care if its in PDF or orginal, Free or $$$ any help would be great I thought maybe someone here may be able to point me in the right direction. Thank you in advance Rod

    • 0 replies
    • 4.1k views
  39. Started by Dyl_will70,

    can u please tell me what u would need to fit a sr20 engine and gearbox into a ke70??? cheers dylan

  40. Started by Freddy,

    Hi guys. Newbie alert. This is my first post... first of all, yes i used the search function but wasn't able to find any info on this question, so here goes (hopefully i won't get flamed too much :lolcry: ) i owned a 4 speed manual ke70 for about 5 years and it was dead stock but was still a really fun car to drive. it was my first intro to jap cars and just how good they can be. i moved on from that and ended up in another good handling light weight rwd jap car (mx5) which over the years has been modified fairly extensively (tein coilovers, sway bars, avo turbo kit, brake upgrade, lsd diff, etc etc). the problem is that i'm a bit paranoid and i no longer …

    • 12 replies
    • 16.2k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.