Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
hey guys i got a ae71 with a 16valve in it have found a 20valve for cheap and was looking at swapping it over to a 20valve just wondering is there anything i need to change..any help appreciated
-
- 1 reply
- 4.3k views
-
-
Hi, i'm mulling over an engine conversion. The car I have is an 82 ke70 1,3 auto, and want something with a bit of go and a clutch pedal! I'm thinking sr20 maybe? I just want to know how hard, and what I will need to complete the conversion. I'm a mechanic by trade and am pretty handy with a spanner, so I'm well aware that it will be a ball ache to do a manual conversion etc. Thought this would be the best place to get some advice and pointed in the right direction! Cheers, Dan.
-
- 11 replies
- 5.4k views
-
-
-
hey so new to rolla club, got a ke70 rolla at the moment and planning on wiring up the sr20 thats sitting in it. Just seeing if anyone had any advice with it, any problems they had when doing it. Still don't no weather or not to go n/a or turbo it. Having troubles finding some engine mounts if anyone could help with that if they've done the same conversion and also x-member for the box and would be helpful if anyone had a wiring diagram for an sr20.
-
- 4 replies
- 26.6k views
-
-
Ok took the rolla out for a spin since getting myself a daily. Haven't done much at all except a bit of sanding. Enough chat, I was just wondering as to what I can do to get it soft like my 4wd, cable loops around so anyone know what other cable would do, otherwise il just measure the distance and see what I can put on. The car is a ke55
-
- 10 replies
- 6.1k views
-
-
Been thinking today about a high comp, big cammed, individual throttle (or carbied) rb20de in a ke20.. I understand that with the weight of a ke20 being 760kg they can have up to a 2.3L engine in N/A form (in nsw), does this mean that I could shoehorn the straight six in there?? could possibly even re-stamp (shhhh) an rb30 block with rb20de number and use a 26 head for ultimate awesomeness Just a thought as I personally think it would be insane.
-
- 32 replies
- 22.1k views
-
-
Sup guys, relatively new member here. So like, its about 6 months until i get my P's and i am strongly considering buying an '86. The only thing that is bothering me, is if i get one, I'd want to do a 4age conversion. Now i have researched about the swap and have heard it's not that hard, but i'm just wondering if someone can give me an overview about the swap, and how much hassle it really is. Also, can someone let me know how hard the fuel pump is to do? I've heard you can use one from a VL commodore, with slight modifications, true? Any Info would be greatly appreciated. Cheers!!
-
-
- 6 replies
- 31.7k views
-
-
Hi guys, Timing chain is fubar needs replaced on my FIL's 5k. He works for Toyota and found that he could get 3k and 4k parts but 5k weren't available?! since deciphered/assumed that 5ks are only jap imports? 3k and 4k have different tensioners - does anyone know if either will work on the 5k engine? i would assume that the 5k will use a 4k chain and tensioner, but i'm just looking for clarification. serious noob question, but hey, that what you guys are for! D P.S. hope this is in the right section
-
- 3 replies
- 8.3k views
-
-
need some find whats the best way to get a 4age into a ke11
-
- 2 replies
- 2.4k views
-
-
Well i've had the shits with all the questions about 'will my 3tc fit into my kexx??', this thread is for all those questions to be answered instead of starting new threads asking the same questions over and over again So question away ladies and gents, if you have a question post it in here and someone will end up answering it for you Thanks.... Justin
-
- 18 replies
- 10.1k views
-
-
Just wonding how hard would it be to put a 13b into a ke30. Ive got one lying around an just wanted to know if it was an easy task since there tiny engines.
-
-
- 18 replies
- 78k views
-
-
Okay ive narrowed it down to these 2 motors, 1GGTE & 4AGE Engines. now i know that the 1GGTE fits in a Ke30 as i have seen one on youtube and is street legal in NSW. and i look at pictures of it and it looks like there is not any firewall recessing nor tunnel work ?? ( please clarify for me ) i know many people have done this but i would like to put a 1GGTE in it and yeah. so yeah sorry for making another thread guys & girls... so yeah please no negative comments. uhmm i just need to know if any of these will be street legal ? any recessing of firewall and chopping or making gearbox tunnel bigger ? and obviously i would have to change brakes a…
-
- 17 replies
- 15.5k views
- 1 follower
-
-
Ok guys been looking at a cheap easy enough conversion with a decent power upgrade from the crappy 4k in my e7 Now I have been looking at cheap twin cam engines that have a reasonable spare parts market and proformance upgrades Now the g4fk which is a twin cam hyundai engine out of the excel have been around for a while and there are plenty of guys racing them around the track They don't run a dizzy and have 74kw standard so with cold air intake and decent exhaust system and 98ron fuel should bump it up a tad These motors go for around the $600 mark with 3 month warranty from wreckers Just wondering what you guys think of my idea?? Any input would be nice …
-
- 14 replies
- 21.7k views
- 1 follower
-
-
i will be researching on google and forums all that but i m just making a quick topic to see if RollaClub may give me some advice ! and if anyone knows much about it, could you tell me what would need to be done and what i would need for this :) i am very thankful for whoever gives me advice cheers guys & girls !
-
- 16 replies
- 42.4k views
-
-
hey all, just posting up a quick question to anyone who has done the ca conversion. i just brought this ke with ca18det in it and fair to say the conversion was done by a butcher... ive spent a day tidying up the loose end, but i was wondering if the ke speedo cable plugs straight into the ca box or is there an adaptor plug. i havent had a look yet but would love a simple solution if anyone has one. cheers all
-
- 2 replies
- 6.3k views
-
-
Just looking at lots of different things i can put in my KE70... Don't particularly want to go for the SR or CA swaps as they are too common. The 3sgte was my next choice to keep it toyota but the price and after market support really doesn't make it very appealing. could do the 13bt swap which would be a bit of fun but its been done to death in NZ and i'm not sure about rotary reliability.. Then when i was standing there today having a gander at my mate's rex i was thinking about how hard it would be getting a EJ20 from a RS or legacy wagon and putting it in the KE70 I have... What gearbox would I need to run for it and has anyone else done this yet i would be inte…
-
- 11 replies
- 21.7k views
-
-
Hey guys ive recently just signed up on Rollaclub, and ive got a ke30 2 door sedan. its a 2speed auto and i would like to make it manual. so ive done some research on here and google for the past 3days and i have a fair bit of info of things, but i want to know if there is an engine that i could just drop straight in and g'box ? also how much would pricing cost on all of this ? and labour ? I'm sorry that i put a thread up as i know there is alot of these going on as i have seen them. but I'm just asking a simple question and would like to know all the details on doing this. i appreciate any information guy & girls Kyle :)
-
- 8 replies
- 9.4k views
-
-
Hey guys, just wondering what is involved in fitting a 5k and 5-speed to a ke10/11? Cheers, Ben.
-
- 15 replies
- 11.8k views
-
-
I have owned a yellow 2-door KE30 automatic as a daily driver since 1988. It is now very shabby and not running. I would like to see the vehicle go to an enthusiast rather than the wreckers.
-
- 1 reply
- 3.8k views
-
-
-
Hi all, I'm looking at taking possession of a 1998 Altezza in the next month or so. The car has had a big wack up the rear and is unrepairable. The plan is to swap over everything in the engine bay (or as much as we can fit) into my wife's 1982 Celica. This Altezza has the 147kW 3SGE with the 5sp auto gearbox. We also want to fit the dash display and center consol into the Celica. My first question is what diff would you suggest we use with this setup?? We hope to buy and fit the diff for less than a grand (less than $500 if possible, not counting the custom drive shaft). I will keep you all posted as things progress and I'm sure I will have many more que…
-
- 18 replies
- 46.9k views
-
-
hi all, I recently got a ke30 and will be restoring the body before I sort out the engine etc, but I like to do my research first before I do anything :) I got the ke30, and the last owner also had a rusty-beyond saving ta22 celice ST there, with the 2t-b engine...1600 vs 1166cc and crossflow engine, hemispherical head design etc so all the right ingredients to get a nice bit of power out of... now the reason I want to put this into the KE is because he was originally going to do this, and offered I can have the full running gear to go with it. now while i am mechanically minded and all, I want to know is this an easy swap, both wiring-wise and propsh…
-
- 5 replies
- 8.3k views
-
-
Hi All. I'm new here and have just done a 20V Blacktop conversion for my Son who has a AE92 which had a 4AFC in it. I bought a AE111 half cut and have moved it all over into the AE92. I've replaced the fuel tank and dash cluster from a 4AFE. There's not much I won't takle mechanical wise but wiring has always been my nemisus. I took the car to my local auto elec and he had a go at getting it going but it's all a bit much for the local blokes :( I've tried to get my head around the FAQ's and other info I've found but to no avail. I'm chasing some help from anyone that has done one of these conversions before and will load the car on a trailer and tow it to Melbourne to get…
-
- 3 replies
- 2.8k views
-
-
Hey all I'm doing a conversion on my AE92 Sedan. Taking the 4AFC and putting in the 100kw 4AGE, I'm going to try document the whole procedure. Infomation will be greatly appreciated like what parts i need for efi conversion and cooling ect ect just incase I havnt covered all aspects, easier methods to the conversion process would be helpful aswell. I am currently reconditioning the 100kw before the transplant so some advice before I get into it would be great aswell. Thanks Ian
-
- 18 replies
- 88.1k views
-
-
I picked up what i thought was rt104 wagon the other night,had a quick look under yep t series .Things soon changed in the light of day checked trans code nothing stamped (Why did they do this). So i pulled the diff out still thinking its a t series,as it had 10 bolts on the front of it never thought any problem. I pulled it apart this morning and tryed it in my ra40 housing and there is no way it will fit :bash: . As it turns out the car is a rt118 76 model which i was lead to believe came with a BW or tseries??but there is a third option. Any one no what would be in it?? Did rt104s come with t series diffs?? Any way i did get some front calipers ,driving lights, a…
-
- 2 replies
- 4.2k views
-
-
Hey guys i got a 4 door AE93 SX corolla, i have mounted a 4AGZE into it no problems, next step is i have a Garret T25 turbo and HKS Cast Iron Manifold ready to bolt on,also a full mandrel bent 2.5" turbo back system. the 4AGZE has forged pistons, and a LSD gearbox. i was hoping to get some info or heads up about turboing a 4AGZE, thinking of boosting around 15psi (only because T25s are quite small)the main part i need help with is i need to put in the 4agze MAP sensored ECU, and a brand new Haltech E6X + harness, any advice or diagrams would be much appreciated =D also how would i go about getting the AE93SX to go from a 1593cc N/A to being a 4AGZ(t)E legally? and how do …
-
- 3 replies
- 7k views
-
-
I'm new to ke seen i have a 82 ke70 auto but i want to put a manual in it but keep the 4k for now. what is the best manual to go in and how much? ur help is much appreciated
-
- 4 replies
- 9.3k views
-
-
wondering anyone know if this would work ae101
-
- 0 replies
- 2.7k views
-
-
hi guys i want to go sr20 in my ke70, its auto so do i have to put an ae71 pedalbox with clutch lines or custom make one ?
-
- 11 replies
- 14.4k views
-
-
5K Engine Conversion This is an article written by Alex Bates for swapping out a 3K (1200cc) in favour of a 5K (1500cc) in a KE15. Thanks for taking the time to write this Alex. Parts Required: 1x Toyota 5K engine $550 from a jap importer Gearbox oil Not much Engine oil Not much Oil filter $6.95 New radiator hoses (optional) Cheap Radiator coolant $10 or so. Manifold gasket set $12.95 last time I bought one Engine crane / block & tackle These cost lots - just borrow one! Clutch Kit (optional) About $110 (standard) or about $200 (h/duty) 1x mate Will cost a carton of beer 1x hammer to hit mate with when he starts complaining. Clutch centering tool …
-
- 8 replies
- 14k views
-
-
Willing to pay somone who could make me the crossmember and g box crossmember and mounts for a 13b on a ke30 or even pass me onto somone that can do it cheers
-
- 4 replies
- 3.6k views
-
-
hey, ive just got hold of a ke55c and was reading though that Light Vehicular mambo jumbo (can't remember it) but just wonder if any one knew the factory weight of a 55 coupe would rather do a bridge port 13b but if i can't ill have to do a 12a bp and any tips on for the build I'm gettin myself into? Cheerz matt
-
- 1 reply
- 4k views
-
-
Hi there guys, I thought this could be a good option to changeing crossmemebers in the k series cars. http://www.trademe.co.nz/Trade-Me-Motors/Car-parts-accessories/Toyota/Engines/auction-370759507.htm
-
- 0 replies
- 2.6k views
-
-
Hi all I have two KE20, one is a rolling 71 shell the other a complete 74 The 71 is the one being done up while 74 is mainly for parts and adventuallly will be stripped out and sold in unwanted parts and or almost compete vehicle all I want from the 74 is a couple trims bars and grill and corner finishers head lights ect The plan for the 71 is complete 3UZFE front cut transplant a four link rear end and either a 9 inch or hilux conversion only thing that bothers me about hilux diff is the ability to lock and spool I guess I can always run a ARB type air locker lol Ofcarse the 71 will have a complete chassis rail type set up with a multipoint roll cage …
-
- 5 replies
- 6.6k views
-
-
hey every on i just got my ke70 up and running and i am looking to do the 4A-GE conversion. just wondering if i could get a parts list of everything i need to go from a 4k engine to a 20 valve 4age engine i want a parts list of EVERYTHING down to what nuts and bolts i need. please and one more thing i was wanting to find out about the ae86 body kits onto a ke70 what needs to me modified to make it fit on a ke :) tannks regards Ben
-
- 6 replies
- 9.1k views
-
-
I love my KE30, but 1100cc isn't really going all too well, need moar POWA! So what do you think rolla peepz, 1jz or sr20? bear in mind i have an apperntices budget (aus, not much) but will be able to do much of the work myself and with my fitter and turner and auto elec mates.
-
-
- 42 replies
- 41.2k views
-
-
hi i have a ae92 corolla hatch csi 4afe with pod filter and removed muffler is it worth putting a cam in it or turbo it extractors 2.5 exhaust or just getting rid of it or selling it and getting a sx 4age atm i get to a hundred in bout 9.5 sec how much faster is a sx 4age or is it cheaper to do a engine conversion ?????? ne info or feedback would be great thanks
-
- 1 reply
- 7k views
-
-
Hey guys i have been researching a lot about all conversions into ke** mostly ke70s. Any one on the Gold Coast who is doing a engine conversion and would like a hand (no charge as long as you are close by) i am very well mechanicly minded, i am doing this to gain experience and knowledge of from other enthusiasts, i would appreciate if people would let me help them on there conversions. if you are interested in having me help you out and helping me out with your knowledge then PLEASE pm me. thanks guys, jamie. PS. i am currently at tafe so i will only be available on some days, there for they vary depending on tests and shit :P
-
- 6 replies
- 4.6k views
-
-
Thinking of doing this conversion into my KE30 Corolla. Wondering though what kind of 5 speed gear box I could use without having to cut up the body in any shape of form. Or if people think this might be to much of a challenge let me know :) Got someone who reckons an early Celica 5 speed should work, but would like your guys opinions :D Cheers Fusion
-
- 18 replies
- 31.4k views
-
-
Ok, so, 1986 Toyota Corolla AE82 seca 5 speed manual. Standardish 4AC motor in it atm, has rebuilt and ported carbie and a shaved head. If anyone wants some parts, feel free to ask. (: But back to the point, the motor had decided to blow yet another head gasket due to the lack of maintenance of the previous owner. So I started looking around the internet and wreckers for a ruff idea on what it will take and how much it will cost to do a motor swap. A 4AC second hand mind you, was around $500 to $800, which is ridiculous in my opinion. I have found a running 4AGE with warrantee that also includes wiring harness ECU for $900 delivered to my door, it is out of the sa…
-
- 12 replies
- 58.1k views
-