Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
dear fellow rollaclubbers. been discussing with a mate about building a shitbox rally car on a budget. we discussed options both toyota and non Toyota. we both wanted to do an engine conversion for the invaluable experience and just bit more interesting. finally we came to the conclusion sr20 into ke70 for a few reasons. these being, huge range of aftermarket parts, it's gonna involve a bit of fab work, wiring and fuel systems etc. plus it's been done enough before and there is plenty of information out there and people to give advise. now the questions I bring is how cheap does everyone think we can complete the conversion and I don't mean how long is a piece of st…
-
- 2 replies
- 3.7k views
-
-
I am having cooling and pinging problems with my 1.6 that has 330kms. I am tempted to swap the whole engine as the 1.6 is harder to find. Any one have any ideas?
-
- 9 replies
- 31.5k views
- 1 follower
-
-
I am a newbie with a ke30 four and have done a lot of looking around etc at what best to do with the engine for some more up and go as a daily. I have dreamt of 13b turbo and 20v turbo etc etc etc the list can go on all day. As I have found it is better to start small and work my way up. I've seen there are also quite a lot of other newbies in similar situations, so I was thinking what if some of the more experienced guys can do up a thread with pointers on what is realistic for a newbie to do to get more power that way we don't have a million threads about me dreaming of a 13b in my rolla. Ie is it worth doing my stock 3k up or go straight to a 4k or 5k, what sort of mod…
-
-
- 17 replies
- 14.4k views
-
-
hey i have a 1977 ke30 with a stock 3k motor and the thing is gutless can i get more power out of it or is it cheaper to drop a new engine into it?
-
- 9 replies
- 26.4k views
-
-
Hey guys, I came across this setup in a discussion at tafe and was wondering how effective this set up was and if any1 has done it here?
-
- 11 replies
- 75.1k views
- 1 follower
-
-
hi all ive been looking for a 4age 16v starter motor,,,i can't seem to find one ,will one off a 20v work or even off another motor cheers luke
-
- 6 replies
- 28.5k views
-
-
hi boys and girls, I'm after some information for new engine combo for my mates mazda 1000 ute, it's a dally driver so it has to be reliable, not a cop magnet and run carby's. me personally i'm a v8 man and don't know a whole lot about jap motors, so what we have come up with is a 4age or a 2tg with twin side draft webers or something similar? any information would be much appreciated cheers chris
-
- 5 replies
- 15.7k views
-
-
Hey everyone I jus got me an 1980 toyota corolla 4door (ke70) well I'm trying to find a set of rain gaurds now before everyone laughs i know how hard the original ones are to find but maybe I can use some from another car or even get some plactic ones.... I would be greatful if anyone can help me or point me in the right direction....I have also added some pics of what I'm talkin about the blue car is my baby...... Thanks everyone...
-
- 2 replies
- 3k views
-
-
I'm going to convert the old carby to a 20v silver top. I'm getting a complete engine. I figure I'll need a new fuel tank. I was wondering that if I got the engine, fuel tank, after market wire looms, ecu, chip, and ignition is there anything else that needs to be bought. Is the Accel/Brake/clutch ok to keep or need to be replaced. Drivetrain/dif. The flywheel and bellhousings. Any help would be greatly appreciated. Also wondering if it would save a lot of hassle to buy a halfcut?
-
- 13 replies
- 10.8k views
-
-
I'm putting a 13b into my starlet and would like sum info into what is the best option when it comes to rear axel, diff and drive shaft. i want to use the car to race and want to put 215-65-15" rims on the back.....
-
- 1 reply
- 12.7k views
-
-
hey guys ,,,,I'm new to the whole car thing i currently hav a ke70 in my shed that I'm fixing the rust on I'm thinking about going the 4age option i know i need the ae71 crossmember an gearbox cross member... I'm after exactly what else i need,,,,can i buy a fwd 4age turn it mount it and itl work as a rwd? i know i also need a t50 box,,,but will i need a new diff and tail shaft? sorry about the dumb questions :) cheers luke
-
- 4 replies
- 4.9k views
-
-
1JZ-GTE KE70R(SR-5) R-154 TRANNY, ACT 4 PUCK, 440cc supra injectors. SAFC-II, BLACK, HX-35 SINGLE TURBO 46mm external wastgate Custom Exhaust Manifold. HKS SSQV LM-1 wideband. VERY BIG FMIC 3" IN AND OUT 3" straight exhaust piping. FGK exhaust f-series diff. LSD Walbro 255hp. complete cressida syspension. WORKS stagared RIMS. 265/45/17 , B.S. S0-2 tyres weighs = 1050kg = 2300 pounds. .
-
- 15 replies
- 12.5k views
-
-
Hey, I've been looking at this site for a while now, and I'd say it would be best bet for info on an engine swap that i'd like to try. I've got an old ke70 that i'd like to chuck in a commodore V6 (3.8). I've seen 308's in older 'rolla's, so why not somwthing a little different? How do ya think it'll go? thanks
-
- 37 replies
- 62.4k views
-
-
Hey everyone, I recently bought my first car, a 1989 Holden Nova. It's done me well the past month or two but recently I've got the modification bug. From what I've gathered on here, the 4AGE seems to be a good engine to drop in. Having no experience in any of this area, but always being interested, I'm curious to know what it would cost me/how hard it would be. Sorry in advance if this is in the wrong spot or anything. Thanks.
-
- 1 reply
- 10.3k views
-
-
Hello every one..... i am a new member and u guys can see my ride in the members gallery area. previously this ride was being used by my elders but now its in my custody and wants to replace the engine as the stock engine is wearing out and is now consuming engine oil (1 liter to 2500 KM's) please advice me about the engine, keeping in mind that the car is totally in the stock condition, stock gear box (4 forward), stock differential and stock seats and body parts.... please also keep in mind that i am living in pakistan so i can buy an old motor (slightly used) easily rather then a new motor... please also advise me about the differentials, brakes a…
-
- 9 replies
- 10k views
-
-
Hi guys I'm chasing a 4age 20v motor box and loom.i have a ae94 csi 1.6injected I'm wondering what is needed to complete the conversion as ill be doing it myself.ie mounts lining up and all.if someone could point me in the right direction even if there is a topic with someone doing the same if someone could refer me if would be great. thanks guys tommy
-
- 1 reply
- 4k views
-
-
Hey I'm new and have 2 questions, I want to put a beams into my Ke30 4dr sedan but have no idea and want it done right so I was wondering if anyone knows a shop in western Sydney that would do this and preferably a shop that has done something similar. Second part is approx how much will I be up for considering I can't really do any work myself? Any help would be great
-
- 22 replies
- 17.5k views
-
-
hey guys, I recently bought a ke36 panelvan to drive as a daily when i finally get my license back next month, it runs well but i wouldn't mind a little bit more power. One of my mates has a ke70 wagon and is about to get started on a 4age conversion so I'm thinkming about giving him a hundred bucks or so for his 4k motor and everything i need for the conversion. I realise the 1.3 litre isnt going to give me a hell of a lot more power but it will certainly go a bit better than the old 3k and i can't afford a conversion that will require a shitload of expensive changes to the ke. therefore, my question is: How hard will the 4k conversion be and what modifications will…
-
- 5 replies
- 6k views
-
-
hey, has anyone put a 22r-e or 2rz-fe into a ke70? if so does anyone have any info on the conversion? if not why is that?
-
- 7 replies
- 26.8k views
-
-
-
Hi guys, I'm fairly new here. I am soon to begin a CA18DET conversion to My KE70 and every night I have been on all the toyota forums searching for hints and tips on how people have done the conversion but, I haven't found one thread that was very helpful. So I thought I would start a thread here where all the questions can be asked and hopefully only correct, helpful answers are given. I know that there are redily available fitting kits on the market and it's not the installation I am interested in.. that's the easy part! What I would like to know is: - what radiator have people used and what mods were required (if any) - how the loom was adapted - what was…
-
-
- 70 replies
- 121.9k views
-
-
-
ok guys i have started the real build up now still awating sum minor parts off the motor like loom and ecu and manerfold . but that isent the real worry right at this moment i am thinking off rebuilding it and doing the 2L stroker kit but not to sure it needs a rebuild anny way has a bottom end noise it was an ex auto motor but will be manual in the corolla was in my mates 180sx he only just got it and got a motor and manual box for the straight swap and dident really drive it with the auto 2 try and listen to what the noise is. ok i will keep you guys updated with every lil step anlong this buld up looking verry forwed to this . cheers tyler. [WILDKE] com…
-
- 15 replies
- 32.3k views
-
-
just like to start with a big shout to rollaclub great site you have here now to business just started the 1ggte into 87 hilux swap and I'm finding very quickly that alot of the info ive gathered is false if anyone knows anything about this swap like clearance and what radiator to use and engine mounts, coz using two passenger side 3y ones aint gonna work lol as i was told many thanks dave
-
- 9 replies
- 27.9k views
-
-
i need to source a distributor for a injected 5k i have aquired....it didnt come with a distributor or a computer ....if anyone can steer me to the right people would be appreciated
-
- 4 replies
- 6.4k views
-
-
hi,I'm new to this site...and was hoping i could get some tips and info for my ke70. so i was planning on using the stock 4k engine but change to 5k engine block and piston and still using the 4k head...is this okay?...and about the exhaust for a i.3L/1.5L...is a 2 1/4" size good? or just a plain 2" is good enuff? and what about the piping?...oh ya...and using a 4 throttle on the k-series engine is it possible? if so...what is needed to modified in-order to install it? i was planning on getting a 4age...but i got fired...so yea XD sorry lol...i have more to ask...but these question is bugging me alot... please and thank you!
-
- 10 replies
- 6.9k views
-
-
hey guys, i have a 85 corona with a 2s-c and it now has a cracked head, so I'm looking at doing a engine conversion. i have a 85 celica off a mate with a 22re (auto tho), I'm thinking of putting that in but i have read that its not worth it, its easyer to just get a corona with one already in. i want to keep mine because its overrated with no rust and its the white SR model (getting harder to find). has anyone put a 22re in? what about a 3sge? thanks :)
-
- 6 replies
- 13.1k views
-
-
Can any body help with 2nd hand computor for a 20 valve I'm putting into my ke70 The motor came out of a westfield racing car and is race modified so need to have computor that we can adjust to tune any help in Qld would be great
-
- 1 reply
- 2.6k views
-
-
What engine should I put into my KE70? New at the car thing need some guidance.
-
- 3 replies
- 3.3k views
-
-
Hi all Ive been a bit quiet on here for a while now and my KE has been sitting in my garage here in the UK while i went traveling to NZ and OZ last year!! (Loved it :D ) Anyway I met lots of people over there with KEs and various engine swaps and ideas and it got me thinking!!! I had always planned to do an engine swap and was probably going to do a 4AGE swap like everyone else..... but me being a little different and always fancied a V8 car of some kind is now considering the Lexus 4.0 1UZ-FE lump!! Main reasons I'm considering this are............... - Its a V8 :lol: - It makes THAT noise!! - Its cheaper to buy than a good 4AGE here in the UK - I can…
-
- 7 replies
- 56.8k views
-
-
This is what we have planned for the car: Engine: - 1UZ-FE 4L quad cam V8 - Extra stock throttle body on the other side of the plenum - Haltech Platinum Sport 2000 - Strip loom of unnecessary stuff and add extra wires added for full sequential injection - Custom headers with 2.25” outlets merging into a 3” exhaust system - Castlemaine Rod Shop flywheel and bellhousing - Xtreme button clutch - R154 gearbox - Custom tailshaft - Early model Hilux diff with locked centre Chassis: - Sound deadener removed - Firewall and steering column mount modified to get engine as far back as possible without major modifications - Seam welding and bracing in high-stress…
-
-
- 55 replies
- 104.6k views
-
-
hey all! (I'm only planing not actually starting this yet) i saw a picture of a ke with a 3sgeT in it. and got me thinkin what sort of stuff i would need to get the engine into mine? i found out that the engine was from a toyota Hiace.... but that was just a mate tellin me that so idk what year or anything. if any one could give me a link or if they actually what i would need to do this would be fantastic! (sorry for any bad spelling)
-
- 8 replies
- 33.2k views
-
-
Hey guys this is my first post on this site I'm currently doing some work to my girlfriends 1980 ke55 corolla. It's running a dirty old 4k-c with a 5 speed manual behind it. I'll be doing a bit of work to it soon like painting redoing the interior and the reason I'm in this section I'm changing the engine. I plan to put in a 2tg which I am yet to source. The main question I can't find an answer for is will my box fit up to a 2tg? I know the 2tg fits a t50 but I'm unsure on what kind of box is in at the moment. The main reason for asking the question is my box is still in good nick and I'm not really to keen on fitting a hydraulic clutch up at the moment. Also if th…
-
- 13 replies
- 12k views
-
-
Hi i am rod and I'm new here. I'm not real good with engines and mech but can swing a spraygun so any questions there i can help just message me. I am fitting a 4afe into a ae95 i thought the two engines are the same but there is a few differences like knock sensor and a extra port about the size of the ten cent coin below the inlet port for cylinder 1,and what looks like a 7A grey fuel injectors. I think i have a 2nd gen 4AFE by accident. Does anyone know what the little port does? it feeds back into the inlet manifold. What are the other differences i have not found? Any help would be great. Rod
-
- 11 replies
- 132.7k views
-
-
while i sat at home waiting for a friend to finish the body on my ke10 i realised i had 3 weeks until i would have my license back and start building the v6 rolla i started talking about last year so i thought how could i build something with power that was fun to drive had okay economy and cost jack shit that i could use as a daily driver,in the shed i had a rusted out impala that still had the 307 powerglide with 152000kms that just needed a carby and ignition,so i found a nice 86 wagon for its substantial engine bay and ripped out the motor and box (scrapped for $70 brings cost of wagon down to $110) then bought a 50000volt hei for it($85 complete cheers ebay dsm work…
-
- 15 replies
- 13.5k views
-
-
Alrighty then. AGES back I mentioned that I was going to begin a 4age conversion to my KE55. Well I have actually started the conversion. And believe it or not I have been pulling my hair out every night that I go to sleep. So many things to think about. Any way here is list of what I have got so far. Pintara diff with 4.11 gears adn disc brakes. I have already ground back all of the link brackets and coil seats. 4AGE of course, port and polished head, adj. cam gears. Custom bell housing to suit a celica 5 speed box Engine mounts from a ford laser. Making cus…
-
- 213 replies
- 295.6k views
-
-
alright simple question for a simple answer IN QLD, can u put a 12a in a ke20?? ive read all the the forums with all the calculations but no complete answers yes or no? :bash:
-
- 4 replies
- 6.2k views
-
-
Hey guys I have a 1970 ke20, at the moment there is a 4k in it with a 5speed manual gearbox,both in bad condition I am wanting to put a better engine in her but I'm not sure which one would be suitable to replace the current one. I also need to find a mechanic that wont rip me off and is reasonably priced with quality work I have an idea of putting a 4age in her but i don't know what to do from this point on, Or would a 5k be the better choice. How much would it cost to get this all done too. I have no mechanics in my circle of help so I'm lost. If any one knows of a reliable mechanic in the logan area who can help me. .
-
- 18 replies
- 34.7k views
-
-
About to start putting a 4AGE bigport into a KE55. We will be posting progress pics as we go. But definately appreciate any tips/advice or links that may be helpfull. Thanks guys, first post soon, picking up motor and trans tomorrow.
-
- 2 replies
- 3k views
-
-
Basically I'm looking to do the conversion and am struggling to figure out all the parts that i need to hoard if anyone would be so kind to fire away at the essential parts needed one would be most grateful, any ideas on good upgrades would be heaps good too (brakes suspension), chasing a street/track set up , mods please don't get p.o'd ive read that thread about this a millon times still struggling to figure out what diff, tail shaft computers fuel delievery shit like that . Cheers :)
-
- 7 replies
- 53.1k views
-