Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. So I've got a ca18de+t and want to put it in my ke55 so the question is what engine mounts can I use with minimal modifications as I'm not the best with measuring things up etc or if there's anyone who makes them where could I buy them?

      • Upvote
    • 2 replies
    • 19.3k views
  2. Started by wheelzroll,

    I know very little about cars and may be just a dreamer at this point, but i'm hoping you folks can share you wisdom with me. I love my wagon. It have about 220000 km on it, so I am curious about an engine and transmission swap. I'm curious what cars would make ideal donors. I want a manual transmission, mine is an auto with O/D. I would love to make it a diesel but another 4 banger gasoline engine I know is more probable. I want the engine to be reliable, efficient and low maintenance. Performance is nice, but I assume more money, and more maintenance. What cars would make would the easiest swap? Thanks, Hardy

  3. Started by JedzWagn,

    Hi I found an early model transverse mount jdm spec 4agze from an ae92 Levin with about 85k on it. Incl. wiring loom factory IC etc. It's been sitting in a garage for about 10 years... So I thought it was high time to bite the bullet & put it into my ae95 4wd wagon. So can anyone tell me if mine's a big or small port?? How do I tell... & W'sTF-ing difference when I put the pedal to the metal?

  4. Started by 84DKE,

    Hi guys just wondering if anyone has ever did a 350 chev conversion into a ke30 sedan ?? If so how hard is it!! Whats involved an what sorta companies can i go thru to get conversion parts Thanks chris Anyhelp is appreciated

  5. Started by Onbumpstops,

    Hey just got a 98 ae101r corolla (wanted something different) just wanna know what I need to do and what parts I need for a 4age conversion

    • 4 replies
    • 7.3k views
  6. All I have the 20v silvertop in the KE70s engine bay. I want to run the stock computer so that means I have to put an inlet manifold onto the quads for the AFM. 1) there isn't much room 2) what to do with the runners 3) what to do for an inlet manifold 4) somebody has probably done this before 5) got any ideas and some pics Regards Mick G

  7. Started by Rollz94,

    Over the next few years I plan to have a 20v 4age implanted into a ae71. The following post is a plan of what is going to happen and estimated prices. It would be awesome to receive any feedback, if needed be harsh where I'm wrong. Purchase light coloured grey, white or cream AE71- $2000 max Purchase 20v 4age - $2000 est. I'm waiting to receive quotes from a few jap imports shops. My line of thought is try get hold of a half-cut, I have found in most cases the engine was running before it was hacked in half. Suspension, Brakes & Wheels: This will happen after my mechanical mate helps remove the 4ac and installs the 4age. AE86 Coilovers using AE71…

    • 13 replies
    • 8.5k views
  8. Started by salman,

    Hi all, i was running 3k in my starlet, i saw 7k at my friends place and bought it, in exchange i gave 3k to my friend, ... I thought is bolt on .. :( but found out the swap issue,... I Do have a 2k ... Now I want to use the 7K with its original Oil pump ... ?? please help me out here. Many thanks... Salman

    • 7 replies
    • 22.4k views
  9. Started by lyricallyters,

    hey guys, i am seeking the advice from anyone who has gone through the same turmoil i am experiencing at the moment. i am currently in the process of putting a 4k and 5 speed from a ke70 into my ke30. i bought it as a rolling shell, and had an auto in it previously. i have got to the stage of putting the gearbox in and after some research i realised that the extension housing that i had (ke70) would not work with my gearbox as it has the gear shifter too far back and the crossmember would be in the wrong spot. i sourced what i was told to be a ke55 extension housing and put it all together. The cross member bolts wont line up (is around 3 inches out), and the shifte…

    • 12 replies
    • 13.2k views
  10. Hi guys. I'm new to the toyota family. I have recently purchased a Suzuki Sierra and it has a 5K lump in it. Apparently the engine and gearbox were both sourced form a liteace. The little motor goes great but on start up and after idiling for a minute when you take off it leaves a great cloud of smoke. so for the expense of re-conditioning the head i was thinking of just shoving in a good second hand motor. My question is will a 7k just bolt straight in?????? or will i have to modify stuff??? Also does anyone know the weight difference between these engines??? Cheers Starky

    • 2 replies
    • 9.3k views
  11. Started by KE25_rolla,

    Hey guys, I know this can be done, but has anyone on here actually fitted a 4Y crank to a 3T block? If so, was there much work involved in doing the conversion@? ie: what rods, pistons, were used. I assume it will need line boring? How much needed to be removed from the block to allow it to fit. What is the best bottom / top end combination to use? ie: 3TC/3TGTE bottom end, 2TGEU head? Any help and horspower figures would be appreciated. This will be n/a and not turbo'd.

    • 2 replies
    • 42.6k views
  12. Started by iwontarolla,

    Hey guys, So i have about 7 months before i get my full licence and i'm aloud engine conversions. I was planning on rebuilding my 4k for the time being, and then do a engine conversion. Now i see that it might be a bit of a waste of time, doing all that then taking it out in 6 months time. I will also never actually drive it in that 6 months any way most likely. then there's he costs of getting it tuned and it all builds up on a engine i don't plan on using for this car. I'm in South Australia i know ill probably have to call a engineer and all that but was hoping you guys could give me a little in site. Now to get on to the 7age part, I've always been interested i…

    • 8 replies
    • 19.4k views
  13. Started by tipsi,

    What diff is the best I was thinking hilux, vl turbo or r31 With a powerglide wondering what to with the front leaf spring

    • 12 replies
    • 15.4k views
  14. Started by tipsi,

    How hard is it to drop a 13b in to my ke10 not sure yet if I want turbo or not yet help

    • 9 replies
    • 15.5k views
  15. Started by ericcs,

    hi all, i have an 1.6injected ae82 manual with a crap body and have been given an ae101 1.6injected auto. will the 5sp manual from the 4ae engine fit the 4a-fe and all the pedals, gear lingages, drive shafts etc? also, are brake and suspension components the same cheers eric

    • 1 reply
    • 6.1k views
  16. Started by Kee,

    Hey guys just wondering if anyones knows about a 308 or a 253 conversion into a KE70 cheers.

    • 6 replies
    • 16.6k views
  17. Started by rcosa123,

    Hi to all, I am new here in the rolla club forum. i just saw on the other thread about the 4k-c engine with turbo. I am planning to put a turbo on my 2e carb engine, hope you can help me with my building process. Here is my plan. Using a Blow through setup and CT9 Turbo(Stock turbo of 4efte) i am planning to boost only for about 6-10psi with stock internals Here is my Question -Can i use my stock carb for the blow through setup? (i will just sealed the carb in a Tight Air Box?) because i don't know how to jet my Carb, BTW, I'm using Stock AISAN Carb from corolla. -I'm planning to use intercooler, even though i will only run for 6-10psi. do you think its o…

    • 0 replies
    • 18.5k views
  18. hey was looking into conversion on my xt130.. as most people know the starfire doesnt really have much/any kick haha any way to make a conversion legal? and/or p plate legal in vic? pretty much wanting a project car not sure which way to go ect haha. proably end up be only using it in most of a rally / drag car otherwise not sure what will buy haha EDIT: proably something like a 1983 or 86 rolla ? not sure mainly want a rwd manual toy haha

    • 4 replies
    • 16.7k views
  19. Started by madkp61,

    what sort of toyotas have 4age motors that will fit into my ke70 wagon?

  20. Started by KETURBO25,

    Ive looked everywhere on the net to see wether or not its possible to pull a rubbish starfire out of a xt130 Corona and drop in a holden 6 (202) and ive found no answers. I found this to be surprising considering the engine mounts and most everything else looks the same, the only thing that ive heard needs to happen is the radiator needs a thermo mounted on the front rather then the back (engine side). Ive got both a VH Commodore and a xt130 Corona so all the parts are easily sourced for a conversion. Please let me know if you've heard of this being done cause I'm sure it can happen, i just wanna know if the 202 motor and box will fit in without havin…

    • 27 replies
    • 65.8k views
  21. Started by lyricallyters,

    I'm putting a 4k and manual box in my ke30, anything i should look out for? will it all bolt up fine? tailshaft the same length? thanks

  22. Started by madkp61,

    hey guys have a ke70 wagon and was wondering what sort of engine conversiton i could do?? any help would be great.

  23. just got this started on the weekend thought i'd show you guys a few happy snaps excuse the mess like i said i just started it

      • Upvote
    • 72 replies
    • 260.2k views
  24. Hi I'm new to this forum and looking at buying a ke70 with a 4age conversion and as far as i can tell it is going to need some kind of permit because of the power increase being greater than 20% I'm in W.A and want to know if anyone can give me an idea of what i would need to do, the parents wont let me get it unless it will be easy enough to make it legal. Thanks for any advice Ben

  25. Started by MitchX_Ke70,

    Hey Guys I recently bought my KE70 still is basically orginal apart from the respray and being lowered on stock suspension. I'm currently looking at putting a SR20DET with a rb gearbox conversion... Ive been reading heaps of other peoples build threads and learning alot about what i need to do. The only thing I'm having trouble with is finding out about how to make alot of the custom parts such as the engine cross member and the front end suspension mods. If anyone is in WA perth area or even intestate could point me in the right direction with any workshops that they know have made any of these custom parts i would be greatly appreicative. Also if there…

  26. Started by MoNsTaR,

    hey guys, Ive been thinking about doing a 1c turbo conversion for my ke70 for something different, I figured i could probably pick one up fron nz for close to nothing or japan even, I wanted to know what else would i need to do it, could i use the standard tank, what fuel pump do i need, things like that, I'm an engine reco so messing with the engine is not any problem. I'm keen to get this up and running, just would like some info before i jump in. thank you

    • 12 replies
    • 29.2k views
  27. Started by 74coupe,

    Hey guys just after some advice. Been told that a sr20 is too big to fit a ke25 coupe? I have no idea as I haven't ventured down this path before.. What will work and what will fit?? Don't want to do firewall mods and all that and don't want to be spending over the top amounts. Cheers guys. I'm still learning Bout all this so I don't mea to sound retarted haha.

  28. Started by yohan18,

    Hey guys I'm doing a 5k supercharged blow through carbie, going into my 82 ke70, My motor has been built for it. It's got the following 5k block bored out 20thou, New pistons and rings I think d dished pistons Reground cam to street setup Solids conversion Reground crank All new bearings, Welsh plugs, Seals, Block was decked and acid washed, honed. Lightened flywheel Exedy heavy duty clutch 4k head Lightly decked New valves New valve seals, New valve springs 3 angle valve grind Extractors and 2 inch straight through pipe with sports muffler with ve ss exhaust tip. I got my sc12 the other day and I took it into work and pulled the pull…

    • 9 replies
    • 40.4k views
  29. Started by slipn,

    Hey guys, So I recently scored a 4agze reasonably cheap and plan to throw it my AE71. I just want to hear from people that have done this conversion and could give me the heads up on what to look for and be aware of while I am doing it. Also what is the supercharger like in normal driving conditions? I have had many turbo cars in the past but never supercharged. What is like on the highway? Does it stay on boost constantly when at 100kph? Or is it only under full load it starts to create boost? Any advice and stories would be greatly appreciated!!

  30. Hi all Bolted the silver top 20v to the T50 gearbox today. I used the FWD flywheel (AE101 or ae111) and it seems that the flywheel isn't thick enough. what have I done wrong or is there any adjustment with the clutch fork? Regards Mick G

  31. Started by big_kev,

    Hi Ive got a AE92 liftback auto and I'm not happy with the power so I'm planning to do a conversion. My plan is to put in a 4age 16V or 20V but i need it to be auto. I figured out it the easiest way is to buy a half cut and do a swap, but because i want to stay in auto so i don't know if the current gearbox is strong enough for that type of engine. The question i want to ask is that if i do the engine conversion, which gearbox i need. thanks.

    • 1 reply
    • 7.5k views
  32. Started by Mitch1994,

    Hi guys, My dad and i currently have a HZ ute out the back with a 308 engine currently in it, were looking to put in a larger engine in a year or two. I've heard around that i'm unable to register a ke55 with a new v8 engine in it (currently has stock 1.2l), was just wondering if this is true, i currently live in NSW aswell. P plate laws wont be a problem because ill be on my blacks by the time its finished. Also, what would you guys rate the level of difficulty to drop it in? The engine bay looks quite small and what other customisations would i have to do to get it working properly. Addtionally, would it be street legal?

  33. Started by FOOMAN,

    Hey all, just wondering if anyone knows if the toyota 1Y 1.6l engine and the 3Y 2l engine are interchangable, as in drop in and bolt up (like a 3k and 4k). As I've got a 86 hilux which is slow as balls and the engines getting old, so I figured if I could get a 3Y and bolt it up to all the gear then I'd be good to go. Can't find any info on the net so figured I'd ask around on the toyota forums ;) Yes I know the 3Y will be slow too, but atleast it will be able to get around the hills a bit better haha. All it is is a cheap beast. Cheers.

    • 3 replies
    • 15.7k views
  34. Started by ke20 toyoglide,

    Is it hard to swap the 3k to a 4k motor and what parts would i need to do so?

  35. Started by respect55,

    Okay I have a Ke55 4k-c turbo, 5 speed, I'm putting the engine in atm but iv found that there was no cluch spring, and iv look around shops and can't find it, does anyone know where I can get one from? Please help!

    • 3 replies
    • 3.8k views
  36. Started by Hoban86,

    hi names brodie I'm in townsville I'm in luv with the Ke30 or 55 I'm lookin now for one to do up and put a 4 agze in the beast. i would really appreciate it if someone could give me a list of the main componants that i need to make this happen and i can start planning to get a hold of those parts needed. for instance ( diff, tail shaft, engine mounts, rotors, calipers) all the giz i need to start up a plan for my dream rolla. I have looked over the forum but its like a needle in a hay stack to get the right info. PLEASE HELP. cheers brodie.

  37. Started by azza_r8,

    Hi, i knows this question has been asked before but as I'm new to the roller scene and i really don't know what to do. i have looked at doing conversions from 4age, sr20, rb20 to rotors but I'm not sure were to start and the complexity of the conversion as its my first "do up" car. so I'm not sure if i should stick to the standard motor and turbo it or...? its allready got 32/32 carb and exhaust but not sure what else i can do to the standard motor.

      • Upvote
    • 4 replies
    • 28.3k views
  38. Started by ShahrainK,

    hey guys i just converted my ke30 from a 3k to a 4age so I'm gonna set up my car for drifting spec I'm kinda new at this and don't know what should i do to my car 1st so far my car is a 4age 16v skim flywheel non tvis 4-1 extractor t50 gearbox standard diff no camber welded back leaf spring standard front absorbers please guys i really need help on this

  39. Started by jakojordz,

    gday wanting to put twin webber carbys on my 83 ke70 but don't know where i can find a manifold for the carbys if anyone can help it would be great and also if anyone knows of anywhere i can pick up a cheap cam from i wanna work the motor a little bit but still kind of keep it stock looking if anyone can help me please contact me on 0447606775 thanks jack

  40. I own a ke55 corolla 2 door. Date of manufacture 6 month 1979 and have lots of questions about all the changes, modifications, part listings, enginearing requirements and approx cost to mount a sr20 in to my car I would like to see a car in person to take photos and notes can any one help. I will travel from wagga wagga nsw.

      • Upvote
      • Downvote
    • 23 replies
    • 26.4k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.