hi guys I'm doing a ke70 4age tvis map sensor so its been to the auto elects and got all wired up and now i need to get it going it has it all injector pulse , spark, fuel .. sooooo i the motor i got had the dizzy 180 out turn it around and timed it off the wrong case marks but found out it just need to be facing upwards.. if i spray a tiny bit of start you bastard it chimes right up and idles but at like 2500 rpm and that ... if i touch the throttle body it dies so if i try and rev it . it dies ... i don't know what the problem is .. if anyone can help please kind regard locky thank you

First thing I'd check is that you have a "start" signal from the ignition barrel to the circuit opening relay for the fuel pump.

Then I would check for vacuum leaks, it's either that or the timing which is causing the high idle rpms.

thanks for your reply sorted my sh*t out it was only 1 of the 2 blue injector wires was running the signal wire hooked both up away she ran....

Nicely done.

 

How much money did you pay an autoelectrician to wire your car and for it not to be running when he finished?