KE70 Technical Questions

Any solid advice before I start tearing up my dashboerd? Thank you. https://imgur.com/a/hkMFY2a

i am restoring my ke70 and want to renew all electric for it. Does anyone have the wire map of ke70 please! ? Thanks all

Hey guys I am planning on installing a 12V electric fuel pump with a oil pressure safety switch, reason is for safety, want the fuel pump to cut out if stalls, loses oil pressure, get into acident etc, the gist of it is, when the oil switch sensors pressure the fuel pump will activate on cranking, then when the cars starts on running the fuel pump will run of the ignition on running, I was just trying to confirm what would be the best place to wire from normally open to ignition switch, is ig2 the power to the distrubutor BO and the running state Holleys Diagram What I am trying to figure out Also steps 6 - 9 is from Holley wiring installation. …

Hi everybody, I can't seem to find an answer to my question , its an 81 ke So the problem is have is the after market steering wheel adapter is stuck on the column, does anyone have any idea how to remove this , I have the center nut loose ,hope it not something stupid , what am I missing here ?

Just purchased my first car, a 1984 cs-x ke70 and was wondering whether some 13x7 hot-wires with -6 offset will fit on it, ideally without rubbing? I have purchased coilovers for it so it will be lowered, nothing too crazy. I could be completely wrong but my thinking was that i'll be able to raise them more depending if they do rub or not. I've seen people running similar set ups, just with more offset and wheel width on the rear (they scraped on decent dumps though). So I believe they will be okay just wanted to check.

Hey so I just recently bought a 82 ke70 and it had this issue where it won’t pickup fuel at about 3/4 of a tank? Any ideas? also it doesn’t want to change into third without high revs in second, and really clunks changing between the 2. Is an auto

I am having trouble getting a spark from the ignition coil. I feel like something is missing. I am getting power to the ignition coil from the ballast resistor but something isn't right. (see attached image) any advice is appreciated.

WHAT IS THE CORRECT OIL FILTER CAN THERE BE SLIGHT VARIATIONS BUT ALL WORK ON THE KE70 We all know we can use the RYCO Z68 Oil Filter on the KE70 By looking at my parts diagram on Yoshi Parts this is what I found. As you can see the vehicle details are almost correct and correspond to my vehicle specifications with the only difference being the Grade of the wagon which is says DX and mine is a CS Grade. As you can see it states the old part number of the Toyota Genuine Filter you were able to purchase which is 15601-33020 I was able to find photos of the old filter. On the box it states its can be used for a 4KC…

Hello Guys Does anyone have a picture of the vacuum lines running to the right side of the carby on the side of the air/fuel mixture screw, I was playing around with my vacuum gauge tester on the weekend trying to get the highest vaucum, and I think I plugged the tri-connector lines the wrong way, if someone can take a quick snap for me of the vacuum lines I would appreciate it so much. I should of taking a photo beforehand that was my mistake.

Got myself a KE70 wagon with a 4K roughly two years ago as my first project car and have been working on it on and off. The whole time I've been struggling to get it idling nicely. I've refreshed the entire ignition system, replaced the intake maifold gasket and isolated every vac system to elimiate potential vac leaks, but I'm still having issues. Anyway, I notice after the car has sat for a while, every spark plug is either wet with fuel (or oil I can't tell) around the plug and pooling underneath the metal boot thing they sit in. There are also usually carbon deposits around the tip of the plug. After giving them a clean she will idle for a while nicely only to start s…

Probably going to sound like a d**khead trying to explain this issue 😂 So I’ve got a 84 KE70 brought not that long ago. Headlights had started to have a 10- 30 second delay after turning them on from the blinker/wand thingo. Suspected it was a faulty relay, replaced it - Worked for 2 days. Went to leave a friends house last night, headlights didn’t turn on at all. Parker lights work tho. Open the relay box behind the battery and hit the relay and lights turned on again. This afternoon I wanted to double check if they were working, didn’t. Had to turn the car on, hit the relay again and somewhat they turned on after a few hits. Turn the car off light…

Hi there... Looking for info here..I can get my hand on a rear diff from a 95 2.4l petrol Hilux. Will this be suitable for my ke70?

since I last owned a Ke70 20 years ago. My question is I have chosen a ca18det engine for my conversion and looking at help into what rear end I should be looking at as I'm sure the standard wouldn't cope. Is there a straight bolt in diff axles and drums I can put in for a bit more more strength?would a carona diff fit and do the job?or and recommendations would be great... I will be putting a big brake upgrade on the front.

hello guys having trouble with my blinkers. iv just put another combination switch in me ke70 and the blinkers are now going opposite. up is right and down is left has anyone had this trouble

Tengo un corolla 1982 desde hace algunos años, he llevado a restaurar el motor, repara la pintura de la carrocería, repara el tapizado del interior, y he conseguido los accesorios y demás piezas como las luces de las vias, cortesias, luces traseras y delanteras pero el sistema de aire acondicionado no funciona ni siquiera el ventilador me podrían compartir el diagrama eléctrico de este te70/72, para poder reparar este sistema del auto ?

Was hoping someone knows of a compatible diff to body brake hose for the ke70. Can’t find one around apart from undergroundgarage.no. Not sure if they’re reliable or not. But it’d also be $100 to get a $20 part shipped to me so was hoping there’s another cars hose that would work also. part no. 47316A cheers for any help.

Haven't done this before, just wondering if anyone has any tips? Thanks

Hi! i have a ke70 which I'm planning to fit mc carbs to. the question is, Will the classic looking headers that you can buy from australia fit in my engine bay? I have a left hand drive ke70. So Will the headers clear the steering? something like that one in my car that looks like this in the engine bay Hope you get what i mean. thanks in advance. //dennis from Sweden

Hi guys can anyone tell me what cables are this ? i want to install new radio, already discovered the constant power cable, and speakers cables

Hi guys I bought this wagon a short time ago, it was originally a phase 2 but the previous owner applied the front of phase 1 and now I have to make the connections for the turn signals and CLEARANCE. Can anyone explain which are the correct wires? Ps I understand very little mechanics / electronics

Has anyone put a B6ZE ( Mazda MX5 NA ) drivetrain in a KE70 2 doors 1980 mdl. if you know can you please share the info. i don't seem to be able to find anything.

Hello friends... i need toyota corolla genuine front fenders, and front lights and light rings...where can i get these parts...thanks

What is the Factory stud pattern for this year and model..? i have just brought 1 in NZ and it seems to be 4x108..? is that normal..?

Hallo there Ive Just Got a Ke70 1980mod and Just wundering. Is there a kit for 4x100 conversion or is it only get a Machines shop to drill out some new holes for the studs. Have some kei car rims with some love ET that are pretty rare here in Norway

Hey I’m looking at changing my manifold bolts on a 4k to studs does anyone know the size of them and lenght and where is the best place to buy some cheers

Hi I'm new to Corollas, and Toyotas in general and I'm buying a Ke 70 that came up for sale for 100€ locally. The main problem is the car has no plates of paperwork to identify it, so i need to find the vin number. Where is it on the car? Its in really rough shape but complete, my plan is to get it back on the road if i can get paperwork sorted. I have some experience with cars (just revived a 1984 Escort, can post a link to video if anyone wants) , but not with locating vins as this is the first time i have had to do so. Thanks in advance.

my 4k in my ke70 idles pretty rough sometimes, to the point that the whole car shakes lol So far ive cleaned out the carb, got the carb tuned by a mechanic, checked for vaccuum leaks (couldnt find anything), checked the timing and i installed a new manifold gasket, none of these things improved the problem. Also, when i press the throttle pedal, it hesitates a bit and then picks up... Does anyone have suggestions?

I have a 1982 KE70 with 4K and 4-speed gearbox. Last summer I used it as my daily and it worked fine. Later during autumn it didn't always start (only made a clicking noise, but the starter didn't always turn over) when I turned the key, but usually after 5-10 tries it started. Sonetimes it started after I moved the car and tried again, but I don't know if this was just coincidence. I put it in garage for winter and after winter took it out cause I wanted to drive it again. First it just made a clicking noise when I turned the key and after some tries it didn't even make that anymore. Now that I have time I took the starter out and tested it with a battery and cab…

Hey people just wondering if there is such thing as a mini spool for a ke70 diff or a way to lock it that is stronger then welded

Hi guys can anyone help me my tachometer don't work do not kbow witch plug its co nected to there is 3 pkugs behind the cluster and strugling to find it can anyone help me please

can anyone help out with radiator set up for ke70 rotary conversion, can I get a rx2/3/4 radiator to fit. Was looking at the Worley radiators on eBay. any help would be appreciated.

Hi. I'm going to change CE70 van S-series rear axle to early Volvo 240 axle. Now I'm after the measurement from wheel mounting face to face on Corolla's axle (Volvo 240 is 1410mm) and if someone has done this conversion? How about tailshaft lengths? Do I need to change rear half of it (= Is Volvo 240 diff nose longer than S-series diff nose)? Are tailshaft rear half's different between KE70 sedan with U-series, KE70 wagon with U-series and CE70 van with S-series? Thanks again!

Hi Does some one know if a rhd ke70 meter will fit into a lhd? Thanks

Hi all, I have a 1981 KE70 and need to know what gearbox oil to use (it has a 4k engine with a 5 speed manual trans). I have done quite a bit of research in the forum, but I need to be sure Is it 80W90 or 75W80 or something else? Any other variable to worry about when choosing the oil? Thanks! Looking forward to your answers

This is the stock KE70 starter motor loom (removed due to 4age conversion and battery relocation to boot). Is the thick Black/White trace wire attached to main battery loom for the 4K starter motor? I don't have battery at moment to test with key and multimeter.

hello guys ,, new here ok so my plan is to fit s13 front knuckles on my ke70 for more angle more adjustable .. i have the knuckle and the whole thing from the front end of an s13 ... i know i need to drill wider holes on the strut tower and on the LCA to fit the tension rod .. anyone tried this setup and how does it feel ... pros and cons anyone .. and if there is a thread where someone discussed this please leave the link below so i can read more about it..

Hey everyone, first time posting but have been coming to rollaclub for ages for advice. Now my problem is that I have an AE71 project where I want to give it raised suspension, the opposite of about everyone else on this site haha. Now if anyone knows of any cheap and not necessarily road legal ways of raising it, short of welding the shocks, that'd be really appreciated. Thanks

Alrighty fellow Corolla owners , I'm currently in the process of building a t engine in a fairly mild setup , but where other than crower or schider still make camshafts for this application as well lifters other than oem or brd racing , trying to see whats all out here that I'm missing . thank you in advance. it going in a Te75 hardtop

Does anyone know which company sells this type of mirror?

Hi there, I bought this part a while back, probably about 6 months ago and I've been searching for it ever since online. Pretty sure it's some kind of rear canard, but I can't find it anywhere. The picture is of it currently on my car... Can anyone tell me what it's from? Such as the brand, maybe where I can find it... is it from another car maybe? Thanks.