My connections in my key barrel broken for the ignition, the accessories part still works though

 

So I'm planing on installing a start button to fix this

 

Which wires will need to be shorted(connected to the button)

 

Thank you

You'll have to check wires for power as I haven't found a reliable wiring diagram for each Corolla. I have several diagrams that vary from each other.

 

Brown should be power coming in for ignition & running.

White should be power coming in for everything else.

Blue/red is accessories

Ignition to run the motor through the ballast is red/orange

Starter motor solenoid is black/white

Ballast bypass to start the motor is what is left. I can't read the colour... The "start" part of the key feed both those circuits at once.

 

The brown comes from one fusible link by itself and feeds the ignition circuit and ballast resistor to keep the motor running through red/orange

 

The white is from another fusible link and feeds other circuits as well as the starter motor and ballast bypass direct to coil +ve for cranking.

Hi Liam,

New aftermarket KE70 switches are available on ebay.

 

 

http://www.ebay.com....=item3ce9d87f3e

 

Cheers Banjo

thanks guys

 

installed a start button and now works:)