greenmac80 Posted November 9, 2015 Author Report Share Posted November 9, 2015 alot more hours but we're here now. heater lines mostly done... (changing them now to make them neater) air con condenser added. trans cooler added and plumbed. (again changing them a bit to make neater) Front lights back in. Also front brake lines all done. and new hardline made to go to rear brakes. also Lexus engine cover sourced. airbox just chilling for the moment. gotta make some mounts but thats where it'll go. ignitors will be moved underneath the air box to hide em away a bit. Charcoal canister hardline added. Radiator is coming out also to get modded this week. The outlets are smaller than the UZ outlets. so they'll be getting matched. As well as some mount bosses and sensor bungs being added. Quote Link to comment Share on other sites More sharing options...
greenmac80 Posted November 9, 2015 Author Report Share Posted November 9, 2015 Pressure feed to power steering pump was made yesterday and bolted on. started routing lines for the power steering cooler. neatened up the trans cooler lines. Also did my best to neaten up the heater lines as well. Have a proposed mount position for the airbox and power steering reservoir. Radiator coming out this arvo and being dropped off for modding. Quote Link to comment Share on other sites More sharing options...
snot35 Posted November 10, 2015 Report Share Posted November 10, 2015 This thing is the best :D Quote Link to comment Share on other sites More sharing options...
67Rolla-Ken Posted November 10, 2015 Report Share Posted November 10, 2015 Agreed! Quote Link to comment Share on other sites More sharing options...
greenmac80 Posted November 11, 2015 Author Report Share Posted November 11, 2015 thanks guys much appreciated sent my bonnet hinges off to get cleaned up. for the money and time savings was well worth it. they look like new ones awaiting a beading tool so i can mount and run my power steering lines. Also got quite a few engine bay bits on the way. Quote Link to comment Share on other sites More sharing options...
greenmac80 Posted November 25, 2015 Author Report Share Posted November 25, 2015 radiator overflow purchased and mounted. Tek screws for the moment. Rivets later. Also my washer tank. i made a bracket that the stock soarer charcoal canister slides into. Rough as guts atm but only test fitted. sorted my pedal situation. ms112 pedal assembly and cable. NEARLY a direct bolt in. and finally got my b&M shifter botled down and the cable run through. Quote Link to comment Share on other sites More sharing options...
67Rolla-Ken Posted November 27, 2015 Report Share Posted November 27, 2015 I just want one! :D Quote Link to comment Share on other sites More sharing options...
greenmac80 Posted November 30, 2015 Author Report Share Posted November 30, 2015 buy this one when its all done then!! haha Quote Link to comment Share on other sites More sharing options...
greenmac80 Posted November 30, 2015 Author Report Share Posted November 30, 2015 so interior went back in. Minus seatbelts will be investing in brand new ones. ecu is no where near as covered as id hoped. so.. i'll be making a nice cover for it. also excuse the seats. they are really filthy and broken. However a retrim is on the card in the future. Carpet is new. Knox supplied but it was seriously a crap mould. good thing 90% of it is covered by seats and trims. Quote Link to comment Share on other sites More sharing options...
67Rolla-Ken Posted November 30, 2015 Report Share Posted November 30, 2015 I can offer you a fishtank... and my old xbox 360? :P What colour you going with the seats? Quote Link to comment Share on other sites More sharing options...
greenmac80 Posted November 30, 2015 Author Report Share Posted November 30, 2015 i'm going to go same colour seats. but i might switch it up with leather and suede. as soon as its finished i'm going to put it on the market. if someone buys it then so be it. the price however will be quite high but worth every penny, Quote Link to comment Share on other sites More sharing options...
67Rolla-Ken Posted December 1, 2015 Report Share Posted December 1, 2015 Any idea on the price? Quote Link to comment Share on other sites More sharing options...
greenmac80 Posted December 2, 2015 Author Report Share Posted December 2, 2015 considering fab work. motor. Bare metal resto. Brakes, wheels, etc etc. it will have new seats. roof lining, and a tasteful stereo. plus air suspension when it goes up for sale. the price will be set at 25k. Quote Link to comment Share on other sites More sharing options...
67Rolla-Ken Posted December 2, 2015 Report Share Posted December 2, 2015 Seems fair to me. Not sure there's many buyers for old Toyotas at that price though. Quote Link to comment Share on other sites More sharing options...
greenmac80 Posted December 3, 2015 Author Report Share Posted December 3, 2015 not a whole lot but.... i don't care if it sells or not. i'll keep it and enjoy it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.