March 8, 201610 yr comment_703533 Hi fellas, I have just purchased a new master cylinder which I have made an adapter plate to bolt it to the standard booster in my 79 ke55. The question I have is how do you remove the brake master pushrod so I can make up a longer one?? I pull it out as far as I can and it stops. Do I need to remove the seal at the front of the booster? Cheers for your help Report
March 8, 201610 yr comment_703534 Does the pushrod not have a thread in it for adjustment? I think they normally do. just have a good look at the end of it and see if it can be turned and undone. And before you ask, yes i am talking about the master cylinder side not the pedal side. Both normally have an adjustment. Report
March 8, 201610 yr comment_703535 The question I have is how do you remove the brake master pushrod so I can make up a longer one?? I pull it out as far as I can and it stops. Do I need to remove the seal at the front of the booster? Cheers for your help Yep, gently pull the rubber boot/seal off and you should see a wire retaining clip. Pull the clip out(be careful as the piston may slide out too) and you're gold. Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now