Jump to content
Milkman

Ke70 4k-c won't start plz help

Recommended Posts

Members dont see this ad

Yeah, looks like there is a wire missing off the coil +ve.

The ballast resistor drops 12V down to 9V for the 9V coil, but it gets bypassed when you're cranking. So the +ve coil side has two wires, one straight from the key for cranking, and one from the ballast resistor for running. Then the -ve goes to the dizzy, and to the tacho if you have one, and often to a capacitor to get rid of radio noise.

Get a test light or a multimeter and find the wire that is +12v when the key is on cranking, it should be red,  that goes on coil +ve. Check that the wire from the ballast to coil +ve is live when the key is just on ignition.

Check where the coil -ve wires go to. You only need the one going to the distributor really.

With the points open and the key on ignition, you should get a spark across the points with a screwdriver.  There are wiring diagrams on here.


See how you go...

 

Oh, that purple wire just goes around the engine bay to the other side I think.

Edited by altezzaclub

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...