Bobalong Posted May 6, 2019 Report Posted May 6, 2019 Hey everyone new to the page. Has anyone ever fitted a 4 link and chassis clip in a ke70. Looking for some contact and info on where I can get one. We have tried McDonald brothers racing but wondering if there is any other options in Australia Quote
altezzaclub Posted May 6, 2019 Report Posted May 6, 2019 Pro9 do them, but I can't see they do any better than the 5-link that's in there. Nissan ran the 4-link with angled arms in their 1980s cars, we always thought it was a compromise as the arms fight against one another when the suspension goes up and down. http://www.pro9.com.au/?PCID=10796&PSO=259&PSID=Pro9-4LK1000VT&PSV=Primary&CDO= Pro9 have parallel links and a diagonal locating arm instead of a panhard. You planning some big horsepower? Quote
Bobalong Posted May 6, 2019 Author Report Posted May 6, 2019 (edited) Yeah we are building it as a drag car. Keeping with the Toyota theme we are going to be running a 1kd around the 500hp mark and 1000nm at the wheels so we need a rear end to cope. Edited May 6, 2019 by Bobalong Quote
altezzaclub Posted May 6, 2019 Report Posted May 6, 2019 makes sense then- you won't be worrying about wheel travel as much as torque twisting one rear wheel right off the ground. Quote
kickn5k Posted May 7, 2019 Report Posted May 7, 2019 Try http://www.lauriamotorsport.com.au Or Next Gen race cars in Hallam Victoria. Either should be able to point you in the right direction. Quote
Bobalong Posted May 7, 2019 Author Report Posted May 7, 2019 Cheers every one. We spent a few hrs last night under the back with a pen and a tape checking it out, we are going to try and build our own set up. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.