chrisandliz[RL] Posted July 14, 2006 Report Share Posted July 14, 2006 hi boys, i'm rebuilding a 3tc and i was going to keep it under $200 if posable. i pulled the head off and the bore is ok , but how bad does it have the be to rebore?? i can just fell a tiny lip. i what your ideas :lolcry: this motor is for the sort term, btw Quote Link to comment Share on other sites More sharing options...
Guest Brad Posted July 14, 2006 Report Share Posted July 14, 2006 Get her done properly, saves you from pulling it apart down the track. Just my 2c, Brad Quote Link to comment Share on other sites More sharing options...
love ke70 Posted July 14, 2006 Report Share Posted July 14, 2006 (edited) lol, a rebuild for under 200 hahahahahaha is the bore glazed? thats when it needs to be honed, but if your using new rings you need to rehone as this is what beds the rings in reboring isnt nesecary unless its been honed a few times or is well worn... Edited July 14, 2006 by love ke70 Quote Link to comment Share on other sites More sharing options...
chrisandliz[RL] Posted July 14, 2006 Author Report Share Posted July 14, 2006 lol, a rebuild for under 200hahahahahaha well maybe i'm being a little optimistic, but rebuilding like a cheap ass is hard. Quote Link to comment Share on other sites More sharing options...
chrisandliz[RL] Posted July 14, 2006 Author Report Share Posted July 14, 2006 lol, a rebuild for under 200hahahahahaha well maybe i'm being a little optimistic, but rebuilding like a cheap ass is hard. Quote Link to comment Share on other sites More sharing options...
chrisandliz[RL] Posted July 14, 2006 Author Report Share Posted July 14, 2006 lol, a rebuild for under 200hahahahahaha well maybe i'm being a little optimistic, but rebuilding like a cheap ass is hard. Quote Link to comment Share on other sites More sharing options...
love ke70 Posted July 14, 2006 Report Share Posted July 14, 2006 what sort of rebuild are you talking? ill give u the price of my 1ggte rebuild, 24 valve straight 6 admitadly... redo valve seats and faces skim head deck block balance bottom end lighten and reface flywheel hone bores regrind crank due to excessive wear ~1200 (done by jack brothers racing, one of best workshops in qld) would be about 450 cheaper if i didnt balance and lighten flywheel and regrind crank... but have to regrind, so have to balance...so why not lighten flywheel right :lolcry: then, h/g head bolts thrust washers timing belt ~340 then bearings rings valve stem seals cam and crank seals ~500 obviously a 3t parts will be cheaper/more available but its not cheap brother, its not cheap Quote Link to comment Share on other sites More sharing options...
chrisandliz[RL] Posted July 14, 2006 Author Report Share Posted July 14, 2006 well this motor is short term motor so i don't want to waste money on it. Quote Link to comment Share on other sites More sharing options...
madrolla68 Posted July 14, 2006 Report Share Posted July 14, 2006 well this motor is short term motor so i don't want to waste money on it. Depends chris,you can de-ridge and hone it,re-ring it until you have the money to do it properly and it may go for ages. Quote Link to comment Share on other sites More sharing options...
Dan Posted July 15, 2006 Report Share Posted July 15, 2006 Find a better engine thats running, new gaskets and welsh plugs and use that. If you want machining done it is going to cost a fair bit... You can rebuild a K motor for 500 andy... if you know the right people... Quote Link to comment Share on other sites More sharing options...
love ke70 Posted July 15, 2006 Report Share Posted July 15, 2006 price check on head gaskets, 4k vs 1ggte hmm, thats 17 vs 104.95 everything more expensive for my engine.... like, i bought 2 sets of 4k rings 2 sets of 4k big end bearings 2 sets of 3s main beaings coz thats cheaper than genuine and theyre the same size :) but yeah...my engine is f@$ked...for a week or 2 more anyway :lolcry: Quote Link to comment Share on other sites More sharing options...
chrisandliz[RL] Posted July 15, 2006 Author Report Share Posted July 15, 2006 price check on head gaskets, 4k vs 1ggte hmm, thats 17 vs 104.95 everything more expensive for my engine.... like, i bought 2 sets of 4k rings 2 sets of 4k big end bearings 2 sets of 3s main beaings coz thats cheaper than genuine and theyre the same size ;) but yeah...my engine is f@$ked...for a week or 2 more anyway :) i got mine for 13.75 for the 3t and 9.95 for the 4k. :lolcry: but i'm still trying to get some rings at a good price :( can't be stuffed paying 50 to 70 bucks for them ;) any way, i made a new contact that may come in handy. This chick my wife sells avon to works in the toyota distribution centre. well there is no better way to be a tight ass than networking :D and you can quote me on that!!! ha ha ha Quote Link to comment Share on other sites More sharing options...
chrisandliz[RL] Posted July 15, 2006 Author Report Share Posted July 15, 2006 Find a better engine thats running, new gaskets and welsh plugs and use that. If you want machining done it is going to cost a fair bit... You can rebuild a K motor for 500 andy... if you know the right people... i got mine 4k re-build done for $450 but i should not have used a gregory's maunal to put it back together!!! they make you take more wrong turn than a drunk'n taxi driver!!! the cursed book made three misstakes on one frig'n page!!! Quote Link to comment Share on other sites More sharing options...
chrisandliz[RL] Posted July 15, 2006 Author Report Share Posted July 15, 2006 well i may have a new lead, aparently the 2T and the L18 and L20 (datsun motors :lolcry: ) have the same rings!!! so i make just yet get some cheap ass ring sets :) Quote Link to comment Share on other sites More sharing options...
love ke70 Posted July 15, 2006 Report Share Posted July 15, 2006 for cheap shit talk to a company called STA parts, in NZ theyre utter shit in the customer service department (and had 4 oversized 1ggte pistons in stock...go figure that one!) but by golly miss molly they have some good prices!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.