77ROLLAMAN Posted April 5 Report Posted April 5 I have recently installed a 5k into my 77 KE30 with a K50 trans. I did this same conversion years ago to my 75 model my question is where the shifter comes through the floor it hits on the 77 model are the transmission holes in different positions shifter sits back 50mm Quote
Taz_Rx Posted April 6 Report Posted April 6 Sounds like you have a ke70 gearbox not a ke30/55 one. Quote
Banjo Posted April 6 Report Posted April 6 (edited) Have a read through a thread on these matters going back about 8 years, in which I remember contributing. Gearbox Swaps I know mine was a bit of a nightmare, removing an auto & fitting a KE70 5 speed gearbox. It gets a mention in this thread. Apparently, the bearings for these older Corolla manual gearboxes are getting very hard to access these days, according to Altezzaclub. Hope that is of some assistance. Cheers Banjo Edited April 7 by Banjo Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.